虚拟机中Opensuse扩展分区大小
一、Virtual Machine 扩展硬盘大小
在vmware虚拟机中设置 硬盘大小，扩展至需要的大小。这里简要略去。
然后进入系统；
sudo parted //启动parted
(parted) print list
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sda: 129GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 2155MB 2154MB primary linux-swap(v1) type=82
2 2155MB 27.3GB 25.2GB primary btrfs boot, type=83
3 27.3GB 64.4GB 37.1GB primary xfs type=83
(parted) help
align-check TYPE N check partition N for TYPE(min|opt) alignment
help [COMMAND] print general help, or help on COMMAND
mklabel,mktable LABEL-TYPE create a new disklabel (partition table)
mkpart PART-TYPE [FS-TYPE] START END make a partition
name NUMBER NAME name partition NUMBER as NAME
print [devices|free|list,all|NUMBER] display the partition table, available devices, free space, all found partitions, or a particular partition
quit exit program
rescue START END rescue a lost partition near START and END
resize NUMBER END change end sector of partition NUMBER
rm NUMBER delete partition NUMBER
select DEVICE choose the device to edit
disk_set FLAG STATE change the FLAG on selected device
disk_toggle [FLAG] toggle the state of FLAG on selected device
set NUMBER FLAG STATE change the FLAG on partition NUMBER
toggle [NUMBER [FLAG]] toggle the state of FLAG on partition NUMBER
unit UNIT set the default unit to UNIT
version display the version number and copyright information of GNU Parted
(parted) print devices
/dev/sda (129GB)
(parted) print all
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sda: 129GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 2155MB 2154MB primary linux-swap(v1) type=82
2 2155MB 27.3GB 25.2GB primary btrfs boot, type=83
3 27.3GB 64.4GB 37.1GB primary xfs type=83
parted之后执行print free ，会发现多出来的空间Free Space.
(parted) print free
Model: VMware, VMware Virtual S (scsi)
Disk /dev/sda: 129GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
32.3kB 1049kB 1016kB Free Space
1 1049kB 2155MB 2154MB primary linux-swap(v1) type=82
2 2155MB 27.3GB 25.2GB primary btrfs boot, type=83
3 27.3GB 64.4GB 37.1GB primary xfs type=83
64.4GB 129GB 64.4GB Free Space
(parted) resize 3
Error: Partition /dev/sda3 is being used. You must unmount it before you modify it with Parted.
(parted) quit
suse@linux-nhtn:~> sudo umount /dev/sda3
umount: /home: target is busy
(In some cases useful info about processes that
use the device is found by lsof(8) or fuser(1).)
suse@linux-nhtn:~> sudo parted
GNU Parted 3.1
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) resize 3
Error: Partition /dev/sda3 is being used. You must unmount it before you modify it with Parted.
(parted) quit
suse@linux-nhtn:~> sudo umount /dev/sda3
umount: /home: target is busy
(In some cases useful info about processes that
use the device is found by lsof(8) or fuser(1).)
由于 umount: /home: target is busy，所以利用GParted Live CD来进行分区，有点像WIN PE.
当然如果能够umount /home;也可以利用 parted 进行resize。ref：用parted调整分区大小
二、操作系统扩展分区
1. 下载GParted Live CD 0.25.0-3； (因为必须在分区被umount的情况下才能扩展分区）
2. Vmware 启动后 按F2 从光盘加载GParted Live CD
3. 选择Simplified Chinese语言，进入Live系统，启动GParted 软件；选择中需要调整的分区---->右键-更改大小---->调整分区--->点击工具栏Apply执行。
点击Apply执行结果如下：
异常情况处理：
xfs_repair
ERROR: The filesystem has valuable metadata changes in a log which needs to
be replayed. Mount the filesystem to replay the log, and unmount it before
re-running xfs_repair. If you are unable to mount the filesystem, then use
the -L option to destroy the log and attempt a repair.
Note that destroying the log may cause corruption -- please attempt a mount
of the filesystem before doing this.
参考：xfs文件系统元数据损坏修复 http://3402313.blog.51cto.com/3392313/1739830
修改包括三步：卸载，修复和检查 [root@gpsg32 ~]# xfs_repair /dev/sda3 Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... ERROR: The filesystem has valuable metadata changes in a log which needs to be replayed. Mount the filesystem to replay the log, and unmount it before re-running xfs_repair. If you are unable to mount the filesystem, then use the -L option to destroy the log and attempt a repair. Note that destroying the log may cause corruption -- please attempt a mount of the filesystem before doing this. mount: 结构需要清理 [root@gpsg32 ~]# xfs_repair -L /dev/sdd Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... ALERT: The filesystem has valuable metadata changes in a log which is being destroyed because the -L option was used. - scan filesystem freespace and inode maps... sb_icount 128, counted 4922112 sb_ifree 123, counted 25707 sb_fdblocks 731556628, counted 438595794 - found root inode chunk Phase 3 - for each AG...
[root@gpsg32 ~]# mkdir /mnt/sda3 //创建挂载目录
[root@gpsg32 ~]# mount /dev/sda3 /mnt/sda3 //挂载成功
检查后重新挂载OK
[root@gpsg32 ~]# xfs_ncheck /dev/sda3
这里会将该盘上的文件检查一遍，你会看到熟悉的文件。
[root@gpsg32 ~]# df -h
文件系统 容量 已用 可用 已用%% 挂载点
...
这时候再重新启动GParted，按照正常步骤操作。
祝好运！
参考：
Resizing a Linux Partition (Running in VirtualBox)
