AMD Xilinx K26 从eMMC启动Ubuntu

AMD Xilinx K26 Ubuntu

AMD Xilinx K26支持Ubuntu。从ubuntu amd-xilinx下载映像后，把image烧入到TF卡，可以正常启动Ubuntu。

AMD Xilinx K26 从eMMC启动Ubuntu失败

有客户将image中的文件，复制到K26 eMMC，不能启动Ubuntu， Linux报告找不到根文件系统。

AMD Xilinx K26 Ubuntu 文件系统配置

ubuntu使用fstab加载文件系统。fstab的内容如下：

hankf@XSZGS4:ubuntu_rootfs$ cat ./etc/fstab 
LABEL=writable    /    ext4    discard,errors=remount-ro    0 1
LABEL=system-boot /boot/firmware  vfat    defaults        0 1

可以看到， fstab中使用了LABEL，因此要设置K26 eMMC的分区的LABEL。

设置K26 eMMC的分区的LABEL

使用fatlabel能设置FAT分区的LABEL。使用e2label能设置ext4分区的LABEL。

root@kria:/home/ubuntu# e2label /dev/mmcblk0p2  writable
root@kria:/home/ubuntu# e2label /dev/mmcblk0p2
writable

root@kria:/home/ubuntu# fatlabel  /dev/mmcblk0p1 system-boot
fatlabel: warning - lowercase labels might not work properly on some systems
There are differences between boot sector and its backup.
This is mostly harmless. Differences: (offset:original/backup)
  65:01/00
  Not automatically fixing this.
root@kria:/home/ubuntu# e2label /dev/mmcblk0p1
e2label: Bad magic number in super-block while trying to open /dev/mmcblk0p1
/dev/mmcblk0p1 contains a vfat file system labelled 'system-boot'

AMD Xilinx K26 从eMMC启动Ubuntu

设置K26 eMMC的分区的LABEL后，再次启动，能够正常启动。简化后的启动信息如下：

U-Boot 2022.01 (Apr 04 2022 - 07:53:54 +0000)
MMC:   mmc@ff160000: 0, mmc@ff170000: 1
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr.uimg

[    5.306816] mmcblk0: mmc0:0001 S0J56X 14.8 GiB
[    5.316453]  mmcblk0: p1 p2
[    5.319951] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB
[    5.326406] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB
[    5.332637] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (508:0)
[    9.711829] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   12.276435] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro. Quota mode: none.

root@kria:/home/ubuntu# df -h
Filesystem      Size  Used Avail Use% Mounted on
tmpfs           391M  3.7M  387M   1% /run
/dev/mmcblk0p2   11G  4.6G  5.5G  46% /
tmpfs           2.0G     0  2.0G   0% /dev/shm
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1  4.0G  348M  3.7G   9% /boot/firmware
tmpfs           391M   72K  391M   1% /run/user/132
tmpfs           391M   64K  391M   1% /run/user/1000

root@kria:/home/ubuntu# dosfslabel  /dev/mmcblk0p1
system-boot
root@kria:/home/ubuntu# e2label /dev/mmcblk0p2
writable

参考文档

https://ubuntu.com/download/amd-xilinx

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/2036826124/Booting+Certified+Ubuntu+20.04+LTS+for+Xilinx+Devices

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/2116354051/Tips+Tricks+for+Certified+Ubuntu+20.04+LTS+on+Xilinx+Devices

https://www.xilinx.com/products/som/kria/kv260-vision-starter-kit/kv260-getting-started-ubuntu/connecting-everything.html