352. Data Stream as Disjoint Intervals (TreeMap, lambda, heapq)
Given a data stream input of non-negative integers a1, a2, ..., an, ..., summarize the numbers seen so far as a list of disjoint intervals.
For example, suppose the integers from the data stream are 1, 3, 7, 2, 6, ..., then the summary will be:
[1, 1] [1, 1], [3, 3] [1, 1], [3, 3], [7, 7] [1, 3], [7, 7] [1, 3], [6, 7]
Follow up:
What if there are lots of merges and the number of disjoint intervals are small compared to the data stream's size?
Approach #1: C++.
/**
* Definition for an interval.
* struct Interval {
* int start;
* int end;
* Interval() : start(0), end(0) {}
* Interval(int s, int e) : start(s), end(e) {}
* };
*/
class SummaryRanges {
private:
vector<Interval> intervals = vector<Interval>();
int binarySearch(vector<Interval> intervals, int val) {
return binarySearchHelper(intervals, 0, intervals.size(), val);
}
int binarySearchHelper(vector<Interval> intervals, int start, int end, int val) {
if (start == end) return -1;
if (start+1 == end && intervals[start].start < val) return start;
int mid = (start + end) / 2;
if (intervals[mid].start == val) return mid;
else if (intervals[mid].start < val)
return binarySearchHelper(intervals, mid, end, val);
else
return binarySearchHelper(intervals, start, mid, val);
}
public:
/** Initialize your data structure here. */
SummaryRanges() {
}
void addNum(int val) {
int index = binarySearch(intervals, val);
if (index != -1 && intervals[index].end >= val)
return;
if (index != intervals.size() - 1 && val + 1 == intervals[index+1].start)
intervals[index+1].start = val;
else if (index != -1 && val - 1 == intervals[index].end)
intervals[index].end = val;
else {
intervals.insert(intervals.begin()+index+1, Interval(val, val));
}
if (index != -1 && intervals[index].end + 1 == intervals[index+1].start) {
intervals[index].end = intervals[index+1].end;
intervals.erase(intervals.begin()+index+1);
}
return ;
}
vector<Interval> getIntervals() {
return this->intervals;
}
};
/**
* Your SummaryRanges object will be instantiated and called as such:
* SummaryRanges obj = new SummaryRanges();
* obj.addNum(val);
* vector<Interval> param_2 = obj.getIntervals();
*/
Approach #2: Java.
/**
* Definition for an interval.
* public class Interval {
* int start;
* int end;
* Interval() { start = 0; end = 0; }
* Interval(int s, int e) { start = s; end = e; }
* }
*/
class SummaryRanges {
TreeMap<Integer, Interval> tree;
/** Initialize your data structure here. */
public SummaryRanges() {
tree = new TreeMap<>();
}
public void addNum(int val) {
if (tree.containsKey(val)) return ;
Integer l = tree.lowerKey(val);
Integer h = tree.higherKey(val);
if (l != null && h != null && tree.get(l).end + 1 == val && h == val + 1) {
tree.get(l).end = tree.get(h).end;
tree.remove(h);
} else if (l != null && tree.get(l).end + 1 >= val) {
tree.get(l).end = Math.max(tree.get(l).end, val);
} else if (h != null && h == val + 1) {
tree.put(val, new Interval(val, tree.get(h).end));
tree.remove(h);
} else {
tree.put(val, new Interval(val, val));
}
}
public List<Interval> getIntervals() {
return new ArrayList<>(tree.values());
}
}
/**
* Your SummaryRanges object will be instantiated and called as such:
* SummaryRanges obj = new SummaryRanges();
* obj.addNum(val);
* List<Interval> param_2 = obj.getIntervals();
*/
Appraoch #3: Python.
# Definition for an interval.
# class Interval(object):
# def __init__(self, s=0, e=0):
# self.start = s
# self.end = e
class SummaryRanges(object):
def __init__(self):
"""
Initialize your data structure here.
"""
self.intervals = []
def addNum(self, val):
"""
:type val: int
:rtype: void
"""
heapq.heappush(self.intervals, (val, Interval(val, val)))
def getIntervals(self):
"""
:rtype: List[Interval]
"""
stack = []
while self.intervals:
idx, cur = heapq.heappop(self.intervals)
if not stack:
stack.append((idx, cur))
else:
_, prev = stack[-1]
if prev.end + 1 >= cur.start:
prev.end = max(prev.end, cur.end)
else:
stack.append((idx, cur))
self.intervals = stack
return list(map(lambda x : x[1], stack))
# Your SummaryRanges object will be instantiated and called as such:
# obj = SummaryRanges()
# obj.addNum(val)
# param_2 = obj.getIntervals()
Note:
Java -----> Treemap.
Class TreeMap<K,V>
- java.lang.Object
-
- java.util.AbstractMap<K,V>
-
- java.util.TreeMap<K,V>
- Type Parameters:
K- the type of keys maintained by this mapV- the type of mapped values
- All Implemented Interfaces:
- Serializable, Cloneable, Map<K,V>, NavigableMap<K,V>, SortedMap<K,V>
public class TreeMap<K,V> extends AbstractMap<K,V> implements NavigableMap<K,V>, Cloneable, SerializableA Red-Black tree basedNavigableMapimplementation. The map is sorted according to the natural ordering of its keys, or by aComparatorprovided at map creation time, depending on which constructor is used.This implementation provides guaranteed log(n) time cost for the
containsKey,get,putandremoveoperations. Algorithms are adaptations of those in Cormen, Leiserson, and Rivest's Introduction to Algorithms.Note that the ordering maintained by a tree map, like any sorted map, and whether or not an explicit comparator is provided, must be consistent with
equalsif this sorted map is to correctly implement theMapinterface. (SeeComparableorComparatorfor a precise definition of consistent with equals.) This is so because theMapinterface is defined in terms of theequalsoperation, but a sorted map performs all key comparisons using itscompareTo(orcompare) method, so two keys that are deemed equal by this method are, from the standpoint of the sorted map, equal. The behavior of a sorted map is well-defined even if its ordering is inconsistent withequals; it just fails to obey the general contract of theMapinterface.Note that this implementation is not synchronized. If multiple threads access a map concurrently, and at least one of the threads modifies the map structurally, it must be synchronized externally. (A structural modification is any operation that adds or deletes one or more mappings; merely changing the value associated with an existing key is not a structural modification.) This is typically accomplished by synchronizing on some object that naturally encapsulates the map. If no such object exists, the map should be "wrapped" using the
Collections.synchronizedSortedMapmethod. This is best done at creation time, to prevent accidental unsynchronized access to the map:SortedMap m = Collections.synchronizedSortedMap(new TreeMap(...));
The iterators returned by the
iteratormethod of the collections returned by all of this class's "collection view methods" are fail-fast: if the map is structurally modified at any time after the iterator is created, in any way except through the iterator's ownremovemethod, the iterator will throw aConcurrentModificationException. Thus, in the face of concurrent modification, the iterator fails quickly and cleanly, rather than risking arbitrary, non-deterministic behavior at an undetermined time in the future.Note that the fail-fast behavior of an iterator cannot be guaranteed as it is, generally speaking, impossible to make any hard guarantees in the presence of unsynchronized concurrent modification. Fail-fast iterators throw
ConcurrentModificationExceptionon a best-effort basis. Therefore, it would be wrong to write a program that depended on this exception for its correctness: the fail-fast behavior of iterators should be used only to detect bugs.All
Map.Entrypairs returned by methods in this class and its views represent snapshots of mappings at the time they were produced. They do not support theEntry.setValuemethod. (Note however that it is possible to change mappings in the associated map usingput.)
Python -----> lambda.
当我们在传入函数时，有些时候，不需要显式地定义函数，直接传入匿名函数更方便。
在Python中，对匿名函数提供了有限支持。还是以map()函数为例，计算f(x)=x2时，除了定义一个f(x)的函数外，还可以直接传入匿名函数：
>>> list(map(lambda x: x * x, [1, 2, 3, 4, 5, 6, 7, 8, 9]))
[1, 4, 9, 16, 25, 36, 49, 64, 81]
通过对比可以看出，匿名函数lambda x: x * x实际上就是：
def f(x):
return x * x
关键字lambda表示匿名函数，冒号前面的x表示函数参数。
匿名函数有个限制，就是只能有一个表达式，不用写return，返回值就是该表达式的结果。
用匿名函数有个好处，因为函数没有名字，不必担心函数名冲突。此外，匿名函数也是一个函数对象，也可以把匿名函数赋值给一个变量，再利用变量来调用该函数：
>>> f = lambda x: x * x
>>> f
<function <lambda> at 0x101c6ef28>
>>> f(5)
25
同样，也可以把匿名函数作为返回值返回，比如：
def build(x, y):
return lambda: x * x + y * y
Python -----> heapq.
This module provides an implementation of the heap queue algorithm, also known as the priority queue algorithm.
Heaps are arrays for which heap[k] <= heap[2*k+1] and heap[k] <= heap[2*k+2] for all k, counting elements from zero. For the sake of comparison, non-existing elements are considered to be infinite. The interesting property of a heap is that heap[0] is always its smallest element.
The API below differs from textbook heap algorithms in two aspects: (a) We use zero-based indexing. This makes the relationship between the index for a node and the indexes for its children slightly less obvious, but is more suitable since Python uses zero-based indexing. (b) Our pop method returns the smallest item, not the largest (called a “min heap” in textbooks; a “max heap” is more common in texts because of its suitability for in-place sorting).
These two make it possible to view the heap as a regular Python list without surprises: heap[0] is the smallest item, and heap.sort() maintains the heap invariant!
To create a heap, use a list initialized to [], or you can transform a populated list into a heap via function heapify().
