解读MSP430F169的头文件们
目录
1 msp430f169.h
/* ============================================================================ */
/* Copyright (c) 2020, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
/********************************************************************
*
* Standard register and bit definitions for the Texas Instruments
* MSP430 microcontroller.
*
* This file supports assembler and C development for
* MSP430x16x devices.
*
* Texas Instruments, Version 2.7
*
* Rev. 2.0, Fixed definitions for DMA
* Rev. 2.1, Alignment of defintions in Users Guide and of version numbers
* Rev. 2.2, Fixed definitions for I2C
* Rev. 2.21,Fixed definitions for I2C for assembler
* Rev. 2.3, Fixed type in ADC12 bit definitions (replaced ADC10 with ADC12)
* Added SVS
* Added DMA request definitions
* Rev. 2.4, Removed unused def of TASSEL2 / TBSSEL2
* Rev. 2.5, Added VLD bits in SVS module
* Rev. 2.6, Fixed incorrect bits in I2C STT (wrong:SST) and I2C prefix was missing at some bits
* Rev. 2.7, added definitions for Interrupt Vectors xxIV
*
********************************************************************/
#ifndef __msp430x16x
#define __msp430x16x
#define __MSP430_HEADER_VERSION__ 1210
#ifdef __cplusplus
extern "C" {
#endif
/*----------------------------------------------------------------------------*/
/* PERIPHERAL FILE MAP 外设文件映射 */
/*----------------------------------------------------------------------------*/
/* External references resolved by a device-specific linker command file */
#define SFR_8BIT(address) extern volatile unsigned char address
#define SFR_16BIT(address) extern volatile unsigned int address
#define SFR_32BIT(address) extern volatile unsigned long address
/************************************************************
* STANDARD BITS 标准位定义
************************************************************/
#define BIT0 (0x0001)
#define BIT1 (0x0002)
#define BIT2 (0x0004)
#define BIT3 (0x0008)
#define BIT4 (0x0010)
#define BIT5 (0x0020)
#define BIT6 (0x0040)
#define BIT7 (0x0080)
#define BIT8 (0x0100)
#define BIT9 (0x0200)
#define BITA (0x0400)
#define BITB (0x0800)
#define BITC (0x1000)
#define BITD (0x2000)
#define BITE (0x4000)
#define BITF (0x8000)
/************************************************************
* STATUS REGISTER BITS
************************************************************/
#define C (0x0001)
#define Z (0x0002)
#define N (0x0004)
#define V (0x0100)
#define GIE (0x0008)
#define CPUOFF (0x0010)
#define OSCOFF (0x0020)
#define SCG0 (0x0040)
#define SCG1 (0x0080)
/* Low Power Modes coded with Bits 4-7 in SR */
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define LPM0 (CPUOFF)
#define LPM1 (SCG0+CPUOFF)
#define LPM2 (SCG1+CPUOFF)
#define LPM3 (SCG1+SCG0+CPUOFF)
#define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF)
/* End #defines for assembler */
#else /* Begin #defines for C */
#define LPM0_bits (CPUOFF)
#define LPM1_bits (SCG0+CPUOFF)
#define LPM2_bits (SCG1+CPUOFF)
#define LPM3_bits (SCG1+SCG0+CPUOFF)
#define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF)
#include "in430.h"
#include <intrinsics.h>
#define LPM0 __bis_SR_register(LPM0_bits) /* Enter Low Power Mode 0 */
#define LPM0_EXIT __bic_SR_register_on_exit(LPM0_bits) /* Exit Low Power Mode 0 */
#define LPM1 __bis_SR_register(LPM1_bits) /* Enter Low Power Mode 1 */
#define LPM1_EXIT __bic_SR_register_on_exit(LPM1_bits) /* Exit Low Power Mode 1 */
#define LPM2 __bis_SR_register(LPM2_bits) /* Enter Low Power Mode 2 */
#define LPM2_EXIT __bic_SR_register_on_exit(LPM2_bits) /* Exit Low Power Mode 2 */
#define LPM3 __bis_SR_register(LPM3_bits) /* Enter Low Power Mode 3 */
#define LPM3_EXIT __bic_SR_register_on_exit(LPM3_bits) /* Exit Low Power Mode 3 */
#define LPM4 __bis_SR_register(LPM4_bits) /* Enter Low Power Mode 4 */
#define LPM4_EXIT __bic_SR_register_on_exit(LPM4_bits) /* Exit Low Power Mode 4 */
#endif /* End #defines for C */
/************************************************************
* PERIPHERAL FILE MAP
************************************************************/
/************************************************************
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS 串口
************************************************************/
SFR_8BIT(IE1); /* Interrupt Enable 1 */
#define U0IE IE1 /* UART0 Interrupt Enable Register */
#define WDTIE (0x01)
#define OFIE (0x02)
#define NMIIE (0x10)
#define ACCVIE (0x20)
#define URXIE0 (0x40)
#define UTXIE0 (0x80)
SFR_8BIT(IFG1); /* Interrupt Flag 1 */
#define U0IFG IFG1 /* UART0 Interrupt Flag Register */
#define WDTIFG (0x01)
#define OFIFG (0x02)
#define NMIIFG (0x10)
#define URXIFG0 (0x40)
#define UTXIFG0 (0x80)
SFR_8BIT(ME1); /* Module Enable 1 */
#define U0ME ME1 /* UART0 Module Enable Register */
#define URXE0 (0x40)
#define UTXE0 (0x80)
#define USPIE0 (0x40)
SFR_8BIT(IE2); /* Interrupt Enable 2 */
#define U1IE IE2 /* UART1 Interrupt Enable Register */
#define URXIE1 (0x10)
#define UTXIE1 (0x20)
SFR_8BIT(IFG2); /* Interrupt Flag 2 */
#define U1IFG IFG2 /* UART1 Interrupt Flag Register */
#define URXIFG1 (0x10)
#define UTXIFG1 (0x20)
SFR_8BIT(ME2); /* Module Enable 2 */
#define U1ME ME2 /* UART1 Module Enable Register */
#define URXE1 (0x10)
#define UTXE1 (0x20)
#define USPIE1 (0x10)
/************************************************************
* WATCHDOG TIMER 看门狗
************************************************************/
#define __MSP430_HAS_WDT__ /* Definition to show that Module is available */
SFR_16BIT(WDTCTL); /* Watchdog Timer Control */
/* The bit names have been prefixed with "WDT" */
#define WDTIS0 (0x0001)
#define WDTIS1 (0x0002)
#define WDTSSEL (0x0004)
#define WDTCNTCL (0x0008)
#define WDTTMSEL (0x0010)
#define WDTNMI (0x0020)
#define WDTNMIES (0x0040)
#define WDTHOLD (0x0080)
#define WDTPW (0x5A00)
/* WDT-interval times [1ms] coded with Bits 0-2 */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* Watchdog mode -> reset after expired time */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* INTERRUPT CONTROL */
/* These two bits are defined in the Special Function Registers */
/* #define WDTIE 0x01 */
/* #define WDTIFG 0x01 */
/************************************************************
* HARDWARE MULTIPLIER
************************************************************/
#define __MSP430_HAS_MPY__ /* Definition to show that Module is available */
SFR_16BIT(MPY); /* Multiply Unsigned/Operand 1 */
SFR_16BIT(MPYS); /* Multiply Signed/Operand 1 */
SFR_16BIT(MAC); /* Multiply Unsigned and Accumulate/Operand 1 */
SFR_16BIT(MACS); /* Multiply Signed and Accumulate/Operand 1 */
SFR_16BIT(OP2); /* Operand 2 */
SFR_16BIT(RESLO); /* Result Low Word */
SFR_16BIT(RESHI); /* Result High Word */
SFR_16BIT(SUMEXT); /* Sum Extend */
/************************************************************
* DIGITAL I/O Port1/2
************************************************************/
#define __MSP430_HAS_PORT1__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORT2__ /* Definition to show that Module is available */
#define __MSP430_HAS_P1SEL__ /* Define for DriverLib */
#define __MSP430_HAS_P2SEL__ /* Define for DriverLib */
SFR_8BIT(P1IN); /* Port 1 Input */
SFR_8BIT(P1OUT); /* Port 1 Output */
SFR_8BIT(P1DIR); /* Port 1 Direction */
SFR_8BIT(P1IFG); /* Port 1 Interrupt Flag */
SFR_8BIT(P1IES); /* Port 1 Interrupt Edge Select */
SFR_8BIT(P1IE); /* Port 1 Interrupt Enable */
SFR_8BIT(P1SEL); /* Port 1 Selection */
SFR_8BIT(P2IN); /* Port 2 Input */
SFR_8BIT(P2OUT); /* Port 2 Output */
SFR_8BIT(P2DIR); /* Port 2 Direction */
SFR_8BIT(P2IFG); /* Port 2 Interrupt Flag */
SFR_8BIT(P2IES); /* Port 2 Interrupt Edge Select */
SFR_8BIT(P2IE); /* Port 2 Interrupt Enable */
SFR_8BIT(P2SEL); /* Port 2 Selection */
/************************************************************
* DIGITAL I/O Port3/4
************************************************************/
#define __MSP430_HAS_PORT3__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORT4__ /* Definition to show that Module is available */
#define __MSP430_HAS_P3SEL__ /* Define for DriverLib */
#define __MSP430_HAS_P4SEL__ /* Define for DriverLib */
SFR_8BIT(P3IN); /* Port 3 Input */
SFR_8BIT(P3OUT); /* Port 3 Output */
SFR_8BIT(P3DIR); /* Port 3 Direction */
SFR_8BIT(P3SEL); /* Port 3 Selection */
SFR_8BIT(P4IN); /* Port 4 Input */
SFR_8BIT(P4OUT); /* Port 4 Output */
SFR_8BIT(P4DIR); /* Port 4 Direction */
SFR_8BIT(P4SEL); /* Port 4 Selection */
/************************************************************
* DIGITAL I/O Port5/6
************************************************************/
#define __MSP430_HAS_PORT5__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORT6__ /* Definition to show that Module is available */
#define __MSP430_HAS_P5SEL__ /* Define for DriverLib */
#define __MSP430_HAS_P6SEL__ /* Define for DriverLib */
SFR_8BIT(P5IN); /* Port 5 Input */
SFR_8BIT(P5OUT); /* Port 5 Output */
SFR_8BIT(P5DIR); /* Port 5 Direction */
SFR_8BIT(P5SEL); /* Port 5 Selection */
SFR_8BIT(P6IN); /* Port 6 Input */
SFR_8BIT(P6OUT); /* Port 6 Output */
SFR_8BIT(P6DIR); /* Port 6 Direction */
SFR_8BIT(P6SEL); /* Port 6 Selection */
/************************************************************
* USART
************************************************************/
/* UxCTL */
#define PENA (0x80) /* Parity enable */
#define PEV (0x40) /* Parity 0:odd / 1:even */
#define SPB (0x20) /* Stop Bits 0:one / 1: two */
#define CHAR (0x10) /* Data 0:7-bits / 1:8-bits */
#define LISTEN (0x08) /* Listen mode */
#define SYNC (0x04) /* UART / SPI mode */
#define MM (0x02) /* Master Mode off/on */
#define SWRST (0x01) /* USART Software Reset */
/* UxTCTL */
#define CKPH (0x80) /* SPI: Clock Phase */
#define CKPL (0x40) /* Clock Polarity */
#define SSEL1 (0x20) /* Clock Source Select 1 */
#define SSEL0 (0x10) /* Clock Source Select 0 */
#define URXSE (0x08) /* Receive Start edge select */
#define TXWAKE (0x04) /* TX Wake up mode */
#define STC (0x02) /* SPI: STC enable 0:on / 1:off */
#define TXEPT (0x01) /* TX Buffer empty */
/* UxRCTL */
#define FE (0x80) /* Frame Error */
#define PE (0x40) /* Parity Error */
#define OE (0x20) /* Overrun Error */
#define BRK (0x10) /* Break detected */
#define URXEIE (0x08) /* RX Error interrupt enable */
#define URXWIE (0x04) /* RX Wake up interrupt enable */
#define RXWAKE (0x02) /* RX Wake up detect */
#define RXERR (0x01) /* RX Error Error */
/************************************************************
* USART 0
************************************************************/
#define __MSP430_HAS_UART0__ /* Definition to show that Module is available */
SFR_8BIT(U0CTL); /* USART 0 Control */
SFR_8BIT(U0TCTL); /* USART 0 Transmit Control */
SFR_8BIT(U0RCTL); /* USART 0 Receive Control */
SFR_8BIT(U0MCTL); /* USART 0 Modulation Control */
SFR_8BIT(U0BR0); /* USART 0 Baud Rate 0 */
SFR_8BIT(U0BR1); /* USART 0 Baud Rate 1 */
SFR_8BIT(U0RXBUF); /* USART 0 Receive Buffer */
SFR_8BIT(U0TXBUF); /* USART 0 Transmit Buffer */
/* Alternate register names */
#define UCTL0 U0CTL /* USART 0 Control */
#define UTCTL0 U0TCTL /* USART 0 Transmit Control */
#define URCTL0 U0RCTL /* USART 0 Receive Control */
#define UMCTL0 U0MCTL /* USART 0 Modulation Control */
#define UBR00 U0BR0 /* USART 0 Baud Rate 0 */
#define UBR10 U0BR1 /* USART 0 Baud Rate 1 */
#define RXBUF0 U0RXBUF /* USART 0 Receive Buffer */
#define TXBUF0 U0TXBUF /* USART 0 Transmit Buffer */
#define UCTL0_ U0CTL_ /* USART 0 Control */
#define UTCTL0_ U0TCTL_ /* USART 0 Transmit Control */
#define URCTL0_ U0RCTL_ /* USART 0 Receive Control */
#define UMCTL0_ U0MCTL_ /* USART 0 Modulation Control */
#define UBR00_ U0BR0_ /* USART 0 Baud Rate 0 */
#define UBR10_ U0BR1_ /* USART 0 Baud Rate 1 */
#define RXBUF0_ U0RXBUF_ /* USART 0 Receive Buffer */
#define TXBUF0_ U0TXBUF_ /* USART 0 Transmit Buffer */
#define UCTL_0 U0CTL /* USART 0 Control */
#define UTCTL_0 U0TCTL /* USART 0 Transmit Control */
#define URCTL_0 U0RCTL /* USART 0 Receive Control */
#define UMCTL_0 U0MCTL /* USART 0 Modulation Control */
#define UBR0_0 U0BR0 /* USART 0 Baud Rate 0 */
#define UBR1_0 U0BR1 /* USART 0 Baud Rate 1 */
#define RXBUF_0 U0RXBUF /* USART 0 Receive Buffer */
#define TXBUF_0 U0TXBUF /* USART 0 Transmit Buffer */
#define UCTL_0_ U0CTL_ /* USART 0 Control */
#define UTCTL_0_ U0TCTL_ /* USART 0 Transmit Control */
#define URCTL_0_ U0RCTL_ /* USART 0 Receive Control */
#define UMCTL_0_ U0MCTL_ /* USART 0 Modulation Control */
#define UBR0_0_ U0BR0_ /* USART 0 Baud Rate 0 */
#define UBR1_0_ U0BR1_ /* USART 0 Baud Rate 1 */
#define RXBUF_0_ U0RXBUF_ /* USART 0 Receive Buffer */
#define TXBUF_0_ U0TXBUF_ /* USART 0 Transmit Buffer */
/************************************************************
* USART 1
************************************************************/
#define __MSP430_HAS_UART1__ /* Definition to show that Module is available */
SFR_8BIT(U1CTL); /* USART 1 Control */
SFR_8BIT(U1TCTL); /* USART 1 Transmit Control */
SFR_8BIT(U1RCTL); /* USART 1 Receive Control */
SFR_8BIT(U1MCTL); /* USART 1 Modulation Control */
SFR_8BIT(U1BR0); /* USART 1 Baud Rate 0 */
SFR_8BIT(U1BR1); /* USART 1 Baud Rate 1 */
SFR_8BIT(U1RXBUF); /* USART 1 Receive Buffer */
SFR_8BIT(U1TXBUF); /* USART 1 Transmit Buffer */
/* Alternate register names */
#define UCTL1 U1CTL /* USART 1 Control */
#define UTCTL1 U1TCTL /* USART 1 Transmit Control */
#define URCTL1 U1RCTL /* USART 1 Receive Control */
#define UMCTL1 U1MCTL /* USART 1 Modulation Control */
#define UBR01 U1BR0 /* USART 1 Baud Rate 0 */
#define UBR11 U1BR1 /* USART 1 Baud Rate 1 */
#define RXBUF1 U1RXBUF /* USART 1 Receive Buffer */
#define TXBUF1 U1TXBUF /* USART 1 Transmit Buffer */
#define UCTL1_ U1CTL_ /* USART 1 Control */
#define UTCTL1_ U1TCTL_ /* USART 1 Transmit Control */
#define URCTL1_ U1RCTL_ /* USART 1 Receive Control */
#define UMCTL1_ U1MCTL_ /* USART 1 Modulation Control */
#define UBR01_ U1BR0_ /* USART 1 Baud Rate 0 */
#define UBR11_ U1BR1_ /* USART 1 Baud Rate 1 */
#define RXBUF1_ U1RXBUF_ /* USART 1 Receive Buffer */
#define TXBUF1_ U1TXBUF_ /* USART 1 Transmit Buffer */
#define UCTL_1 U1CTL /* USART 1 Control */
#define UTCTL_1 U1TCTL /* USART 1 Transmit Control */
#define URCTL_1 U1RCTL /* USART 1 Receive Control */
#define UMCTL_1 U1MCTL /* USART 1 Modulation Control */
#define UBR0_1 U1BR0 /* USART 1 Baud Rate 0 */
#define UBR1_1 U1BR1 /* USART 1 Baud Rate 1 */
#define RXBUF_1 U1RXBUF /* USART 1 Receive Buffer */
#define TXBUF_1 U1TXBUF /* USART 1 Transmit Buffer */
#define UCTL_1_ U1CTL_ /* USART 1 Control */
#define UTCTL_1_ U1TCTL_ /* USART 1 Transmit Control */
#define URCTL_1_ U1RCTL_ /* USART 1 Receive Control */
#define UMCTL_1_ U1MCTL_ /* USART 1 Modulation Control */
#define UBR0_1_ U1BR0_ /* USART 1 Baud Rate 0 */
#define UBR1_1_ U1BR1_ /* USART 1 Baud Rate 1 */
#define RXBUF_1_ U1RXBUF_ /* USART 1 Receive Buffer */
#define TXBUF_1_ U1TXBUF_ /* USART 1 Transmit Buffer */
/************************************************************
* USART0 I2C
************************************************************/
#define __MSP430_HAS_I2C__ /* Definition to show that Module is available */
SFR_8BIT(I2CIE); /* I2C Interrupt Enable */
#define ALIE (0x01) /* Arbitration lost */
#define NACKIE (0x02) /* No acknowledge */
#define OAIE (0x04) /* Own address */
#define ARDYIE (0x08) /* Access ready (opeation complete) */
#define RXRDYIE (0x10) /* Receive ready (data received) */
#define TXRDYIE (0x20) /* Transmit ready (transmit register empty) */
#define GCIE (0x40) /* General call */
#define STTIE (0x80) /* Start condition */
SFR_8BIT(I2CIFG); /* I2C Interrupt Flag */
#define ALIFG (0x01) /* Arbitration lost */
#define NACKIFG (0x02) /* No acknowledge */
#define OAIFG (0x04) /* Own address */
#define ARDYIFG (0x08) /* Access ready (opeation complete) */
#define RXRDYIFG (0x10) /* Receive ready (data received) */
#define TXRDYIFG (0x20) /* Transmit ready (transmit register empty) */
#define GCIFG (0x40) /* General call */
#define STTIFG (0x80) /* Start condition */
SFR_8BIT(I2CNDAT); /* I2C Data Count */
/* USART 0 Control */
#define I2CEN (0x01) /* I2C enable */
#define MST (0x02) /* I2C master */
#define XA (0x10) /* I2C extended addressing */
#define I2C (0x20) /* USART I2C */
#define TXDMAEN (0x40) /* Transmit DMA enable */
#define RXDMAEN (0x80) /* Receive DMA enable */
SFR_8BIT(I2CTCTL); /* I2C Transfer Control */
#define I2CSTT (0x01) /* Start bit */
#define I2CSTP (0x02) /* Stop bit */
#define I2CSTB (0x04) /* Start byte mode */
#define I2CTRX (0x08) /* Transmit */
#define I2CSSEL0 (0x10) /* Clock select bit 0 */
#define I2CSSEL1 (0x20) /* Clock select bit 1 */
#define I2CRM (0x40) /* Repeat mode */
#define I2CWORD (0x80) /* Word data mode */
#define I2CSSEL_0 (0*0x10u) /* I2C clock select 0: UCLK */
#define I2CSSEL_1 (1*0x10u) /* I2C clock select 1: ACLK */
#define I2CSSEL_2 (2*0x10u) /* I2C clock select 2: SMCLK */
#define I2CSSEL_3 (3*0x10u) /* I2C clock select 3: SMCLK */
#define I2CMM_0 (0x00) /* Master mode 0 */
#define I2CMM_1 (I2CSTT) /* Master mode 1 */
#define I2CMM_2 (I2CSTP+I2CSTT) /* Master mode 2 */
#define I2CMM_3 (I2CRM+I2CSTT) /* Master mode 3 */
#define I2CMM_4 (I2CSTP) /* Master mode 4 */
SFR_8BIT(I2CDCTL); /* I2C Data Control */
#define I2CBB (0x01) /* Bus busy */
#define I2CRXOVR (0x02) /* Receiver overrun */
#define I2CTXUDF (0x04) /* Transmit underflow */
#define I2CSBD (0x08) /* Received byte */
#define I2CSCLLOW (0x10) /* SCL being held low */
#define I2CBUSY (0x20) /* I2C Busy Flag */
SFR_8BIT(I2CPSC); /* I2C Pre-scaler */
SFR_8BIT(I2CSCLH); /* I2C SCL High */
SFR_8BIT(I2CSCLL); /* I2C SCL Low */
SFR_8BIT(I2CDRB); /* I2C Data for Byte access */
SFR_16BIT(I2CDRW); /* I2C Data for Word access */
SFR_16BIT(I2COA); /* I2C Own Address */
SFR_16BIT(I2CSA); /* I2C Slave Address */
SFR_16BIT(I2CIV); /* I2C Interrupt Vector */
#define I2CIV_NONE (0x0000) /* I2C interrupt vector: No interrupt pending */
#define I2CIV_AL (0x0002) /* I2C interrupt vector: Arbitration lost (ALIFG) */
#define I2CIV_NACK (0x0004) /* I2C interrupt vector: No acknowledge (NACKIFG) */
#define I2CIV_OA (0x0006) /* I2C interrupt vector: Own address (OAIFG) */
#define I2CIV_ARDY (0x0008) /* I2C interrupt vector: Access ready (ARDYIFG) */
#define I2CIV_RXRDY (0x000A) /* I2C interrupt vector: Receive ready (RXRDYIFG) */
#define I2CIV_TXRDY (0x000C) /* I2C interrupt vector: Transmit ready (TXRDYIFG) */
#define I2CIV_GC (0x000E) /* I2C interrupt vector: General call (GCIFG) */
#define I2CIV_STT (0x0010) /* I2C interrupt vector: Start condition (STTIFG) */
/************************************************************
* Timer A3
************************************************************/
#define __MSP430_HAS_TA3__ /* Definition to show that Module is available */
SFR_16BIT(TAIV); /* Timer A Interrupt Vector Word */
SFR_16BIT(TACTL); /* Timer A Control */
SFR_16BIT(TACCTL0); /* Timer A Capture/Compare Control 0 */
SFR_16BIT(TACCTL1); /* Timer A Capture/Compare Control 1 */
SFR_16BIT(TACCTL2); /* Timer A Capture/Compare Control 2 */
SFR_16BIT(TAR); /* Timer A Counter Register */
SFR_16BIT(TACCR0); /* Timer A Capture/Compare 0 */
SFR_16BIT(TACCR1); /* Timer A Capture/Compare 1 */
SFR_16BIT(TACCR2); /* Timer A Capture/Compare 2 */
/* Alternate register names */
#define CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
#define CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
#define CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
#define CCR0 TACCR0 /* Timer A Capture/Compare 0 */
#define CCR1 TACCR1 /* Timer A Capture/Compare 1 */
#define CCR2 TACCR2 /* Timer A Capture/Compare 2 */
#define CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
#define CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
#define CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
#define CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
#define CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
#define CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
/* Alternate register names - 5xx style */
#define TA0IV TAIV /* Timer A Interrupt Vector Word */
#define TA0CTL TACTL /* Timer A Control */
#define TA0CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
#define TA0CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
#define TA0CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
#define TA0R TAR /* Timer A Counter Register */
#define TA0CCR0 TACCR0 /* Timer A Capture/Compare 0 */
#define TA0CCR1 TACCR1 /* Timer A Capture/Compare 1 */
#define TA0CCR2 TACCR2 /* Timer A Capture/Compare 2 */
#define TA0IV_ TAIV_ /* Timer A Interrupt Vector Word */
#define TA0CTL_ TACTL_ /* Timer A Control */
#define TA0CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
#define TA0CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
#define TA0CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
#define TA0R_ TAR_ /* Timer A Counter Register */
#define TA0CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
#define TA0CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
#define TA0CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
#define TIMER0_A1_VECTOR TIMERA1_VECTOR /* Int. Vector: Timer A CC1-2, TA */
#define TIMER0_A0_VECTOR TIMERA0_VECTOR /* Int. Vector: Timer A CC0 */
#define TASSEL1 (0x0200) /* Timer A clock source select 1 */
#define TASSEL0 (0x0100) /* Timer A clock source select 0 */
#define ID1 (0x0080) /* Timer A clock input divider 1 */
#define ID0 (0x0040) /* Timer A clock input divider 0 */
#define MC1 (0x0020) /* Timer A mode control 1 */
#define MC0 (0x0010) /* Timer A mode control 0 */
#define TACLR (0x0004) /* Timer A counter clear */
#define TAIE (0x0002) /* Timer A counter interrupt enable */
#define TAIFG (0x0001) /* Timer A counter interrupt flag */
#define MC_0 (0*0x10u) /* Timer A mode control: 0 - Stop */
#define MC_1 (1*0x10u) /* Timer A mode control: 1 - Up to CCR0 */
#define MC_2 (2*0x10u) /* Timer A mode control: 2 - Continous up */
#define MC_3 (3*0x10u) /* Timer A mode control: 3 - Up/Down */
#define ID_0 (0*0x40u) /* Timer A input divider: 0 - /1 */
#define ID_1 (1*0x40u) /* Timer A input divider: 1 - /2 */
#define ID_2 (2*0x40u) /* Timer A input divider: 2 - /4 */
#define ID_3 (3*0x40u) /* Timer A input divider: 3 - /8 */
#define TASSEL_0 (0*0x100u) /* Timer A clock source select: 0 - TACLK */
#define TASSEL_1 (1*0x100u) /* Timer A clock source select: 1 - ACLK */
#define TASSEL_2 (2*0x100u) /* Timer A clock source select: 2 - SMCLK */
#define TASSEL_3 (3*0x100u) /* Timer A clock source select: 3 - INCLK */
#define CM1 (0x8000) /* Capture mode 1 */
#define CM0 (0x4000) /* Capture mode 0 */
#define CCIS1 (0x2000) /* Capture input select 1 */
#define CCIS0 (0x1000) /* Capture input select 0 */
#define SCS (0x0800) /* Capture sychronize */
#define SCCI (0x0400) /* Latched capture signal (read) */
#define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */
#define OUTMOD2 (0x0080) /* Output mode 2 */
#define OUTMOD1 (0x0040) /* Output mode 1 */
#define OUTMOD0 (0x0020) /* Output mode 0 */
#define CCIE (0x0010) /* Capture/compare interrupt enable */
#define CCI (0x0008) /* Capture input signal (read) */
#define OUT (0x0004) /* PWM Output signal if output mode 0 */
#define COV (0x0002) /* Capture/compare overflow flag */
#define CCIFG (0x0001) /* Capture/compare interrupt flag */
#define OUTMOD_0 (0*0x20u) /* PWM output mode: 0 - output only */
#define OUTMOD_1 (1*0x20u) /* PWM output mode: 1 - set */
#define OUTMOD_2 (2*0x20u) /* PWM output mode: 2 - PWM toggle/reset */
#define OUTMOD_3 (3*0x20u) /* PWM output mode: 3 - PWM set/reset */
#define OUTMOD_4 (4*0x20u) /* PWM output mode: 4 - toggle */
#define OUTMOD_5 (5*0x20u) /* PWM output mode: 5 - Reset */
#define OUTMOD_6 (6*0x20u) /* PWM output mode: 6 - PWM toggle/set */
#define OUTMOD_7 (7*0x20u) /* PWM output mode: 7 - PWM reset/set */
#define CCIS_0 (0*0x1000u) /* Capture input select: 0 - CCIxA */
#define CCIS_1 (1*0x1000u) /* Capture input select: 1 - CCIxB */
#define CCIS_2 (2*0x1000u) /* Capture input select: 2 - GND */
#define CCIS_3 (3*0x1000u) /* Capture input select: 3 - Vcc */
#define CM_0 (0*0x4000u) /* Capture mode: 0 - disabled */
#define CM_1 (1*0x4000u) /* Capture mode: 1 - pos. edge */
#define CM_2 (2*0x4000u) /* Capture mode: 1 - neg. edge */
#define CM_3 (3*0x4000u) /* Capture mode: 1 - both edges */
/* TA3IV Definitions */
#define TAIV_NONE (0x0000) /* No Interrupt pending */
#define TAIV_TACCR1 (0x0002) /* TACCR1_CCIFG */
#define TAIV_TACCR2 (0x0004) /* TACCR2_CCIFG */
#define TAIV_6 (0x0006) /* Reserved */
#define TAIV_8 (0x0008) /* Reserved */
#define TAIV_TAIFG (0x000A) /* TAIFG */
/* Alternate register names - 5xx style */
#define TA0IV_NONE (0x0000) /* No Interrupt pending */
#define TA0IV_TACCR1 (0x0002) /* TA0CCR1_CCIFG */
#define TA0IV_TACCR2 (0x0004) /* TA0CCR2_CCIFG */
#define TA0IV_6 (0x0006) /* Reserved */
#define TA0IV_8 (0x0008) /* Reserved */
#define TA0IV_TAIFG (0x000A) /* TA0IFG */
/************************************************************
* Timer B7
************************************************************/
#define __MSP430_HAS_TB7__ /* Definition to show that Module is available */
SFR_16BIT(TBIV); /* Timer B Interrupt Vector Word */
SFR_16BIT(TBCTL); /* Timer B Control */
SFR_16BIT(TBCCTL0); /* Timer B Capture/Compare Control 0 */
SFR_16BIT(TBCCTL1); /* Timer B Capture/Compare Control 1 */
SFR_16BIT(TBCCTL2); /* Timer B Capture/Compare Control 2 */
SFR_16BIT(TBCCTL3); /* Timer B Capture/Compare Control 3 */
SFR_16BIT(TBCCTL4); /* Timer B Capture/Compare Control 4 */
SFR_16BIT(TBCCTL5); /* Timer B Capture/Compare Control 5 */
SFR_16BIT(TBCCTL6); /* Timer B Capture/Compare Control 6 */
SFR_16BIT(TBR); /* Timer B Counter Register */
SFR_16BIT(TBCCR0); /* Timer B Capture/Compare 0 */
SFR_16BIT(TBCCR1); /* Timer B Capture/Compare 1 */
SFR_16BIT(TBCCR2); /* Timer B Capture/Compare 2 */
SFR_16BIT(TBCCR3); /* Timer B Capture/Compare 3 */
SFR_16BIT(TBCCR4); /* Timer B Capture/Compare 4 */
SFR_16BIT(TBCCR5); /* Timer B Capture/Compare 5 */
SFR_16BIT(TBCCR6); /* Timer B Capture/Compare 6 */
/* Alternate register names - 5xx style */
#define TB0IV TBIV /* Timer B Interrupt Vector Word */
#define TB0CTL TBCTL /* Timer B Control */
#define TB0CCTL0 TBCCTL0 /* Timer B Capture/Compare Control 0 */
#define TB0CCTL1 TBCCTL1 /* Timer B Capture/Compare Control 1 */
#define TB0CCTL2 TBCCTL2 /* Timer B Capture/Compare Control 2 */
#define TB0CCTL3 TBCCTL3 /* Timer B Capture/Compare Control 3 */
#define TB0CCTL4 TBCCTL4 /* Timer B Capture/Compare Control 4 */
#define TB0CCTL5 TBCCTL5 /* Timer B Capture/Compare Control 5 */
#define TB0CCTL6 TBCCTL6 /* Timer B Capture/Compare Control 6 */
#define TB0R TBR /* Timer B Counter Register */
#define TB0CCR0 TBCCR0 /* Timer B Capture/Compare 0 */
#define TB0CCR1 TBCCR1 /* Timer B Capture/Compare 1 */
#define TB0CCR2 TBCCR2 /* Timer B Capture/Compare 2 */
#define TB0CCR3 TBCCR3 /* Timer B Capture/Compare 3 */
#define TB0CCR4 TBCCR4 /* Timer B Capture/Compare 4 */
#define TB0CCR5 TBCCR5 /* Timer B Capture/Compare 5 */
#define TB0CCR6 TBCCR6 /* Timer B Capture/Compare 6 */
#define TB0IV_ TBIV_ /* Timer B Interrupt Vector Word */
#define TB0CTL_ TBCTL_ /* Timer B Control */
#define TB0CCTL0_ TBCCTL0_ /* Timer B Capture/Compare Control 0 */
#define TB0CCTL1_ TBCCTL1_ /* Timer B Capture/Compare Control 1 */
#define TB0CCTL2_ TBCCTL2_ /* Timer B Capture/Compare Control 2 */
#define TB0CCTL3_ TBCCTL3_ /* Timer B Capture/Compare Control 3 */
#define TB0CCTL4_ TBCCTL4_ /* Timer B Capture/Compare Control 4 */
#define TB0CCTL5_ TBCCTL5_ /* Timer B Capture/Compare Control 5 */
#define TB0CCTL6_ TBCCTL6_ /* Timer B Capture/Compare Control 6 */
#define TB0R_ TBR_ /* Timer B Counter Register */
#define TB0CCR0_ TBCCR0_ /* Timer B Capture/Compare 0 */
#define TB0CCR1_ TBCCR1_ /* Timer B Capture/Compare 1 */
#define TB0CCR2_ TBCCR2_ /* Timer B Capture/Compare 2 */
#define TB0CCR3_ TBCCR3_ /* Timer B Capture/Compare 3 */
#define TB0CCR4_ TBCCR4_ /* Timer B Capture/Compare 4 */
#define TB0CCR5_ TBCCR5_ /* Timer B Capture/Compare 5 */
#define TB0CCR6_ TBCCR6_ /* Timer B Capture/Compare 6 */
#define TIMER0_B1_VECTOR TIMERB1_VECTOR /* Int. Vector: Timer B CC1-6, TB */
#define TIMER0_B0_VECTOR TIMERB0_VECTOR /* Int. Vector: Timer B CC0 */
#define TBCLGRP1 (0x4000) /* Timer B Compare latch load group 1 */
#define TBCLGRP0 (0x2000) /* Timer B Compare latch load group 0 */
#define CNTL1 (0x1000) /* Counter lenght 1 */
#define CNTL0 (0x0800) /* Counter lenght 0 */
#define TBSSEL1 (0x0200) /* Clock source 1 */
#define TBSSEL0 (0x0100) /* Clock source 0 */
#define TBCLR (0x0004) /* Timer B counter clear */
#define TBIE (0x0002) /* Timer B interrupt enable */
#define TBIFG (0x0001) /* Timer B interrupt flag */
#define SHR1 (0x4000) /* Timer B Compare latch load group 1 */
#define SHR0 (0x2000) /* Timer B Compare latch load group 0 */
#define TBSSEL_0 (0*0x0100u) /* Clock Source: TBCLK */
#define TBSSEL_1 (1*0x0100u) /* Clock Source: ACLK */
#define TBSSEL_2 (2*0x0100u) /* Clock Source: SMCLK */
#define TBSSEL_3 (3*0x0100u) /* Clock Source: INCLK */
#define CNTL_0 (0*0x0800u) /* Counter lenght: 16 bit */
#define CNTL_1 (1*0x0800u) /* Counter lenght: 12 bit */
#define CNTL_2 (2*0x0800u) /* Counter lenght: 10 bit */
#define CNTL_3 (3*0x0800u) /* Counter lenght: 8 bit */
#define SHR_0 (0*0x2000u) /* Timer B Group: 0 - individually */
#define SHR_1 (1*0x2000u) /* Timer B Group: 1 - 3 groups (1-2, 3-4, 5-6) */
#define SHR_2 (2*0x2000u) /* Timer B Group: 2 - 2 groups (1-3, 4-6)*/
#define SHR_3 (3*0x2000u) /* Timer B Group: 3 - 1 group (all) */
#define TBCLGRP_0 (0*0x2000u) /* Timer B Group: 0 - individually */
#define TBCLGRP_1 (1*0x2000u) /* Timer B Group: 1 - 3 groups (1-2, 3-4, 5-6) */
#define TBCLGRP_2 (2*0x2000u) /* Timer B Group: 2 - 2 groups (1-3, 4-6)*/
#define TBCLGRP_3 (3*0x2000u) /* Timer B Group: 3 - 1 group (all) */
/* Additional Timer B Control Register bits are defined in Timer A */
#define CLLD1 (0x0400) /* Compare latch load source 1 */
#define CLLD0 (0x0200) /* Compare latch load source 0 */
#define SLSHR1 (0x0400) /* Compare latch load source 1 */
#define SLSHR0 (0x0200) /* Compare latch load source 0 */
#define SLSHR_0 (0*0x0200u) /* Compare latch load sourec : 0 - immediate */
#define SLSHR_1 (1*0x0200u) /* Compare latch load sourec : 1 - TBR counts to 0 */
#define SLSHR_2 (2*0x0200u) /* Compare latch load sourec : 2 - up/down */
#define SLSHR_3 (3*0x0200u) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */
#define CLLD_0 (0*0x0200u) /* Compare latch load sourec : 0 - immediate */
#define CLLD_1 (1*0x0200u) /* Compare latch load sourec : 1 - TBR counts to 0 */
#define CLLD_2 (2*0x0200u) /* Compare latch load sourec : 2 - up/down */
#define CLLD_3 (3*0x0200u) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */
/* TB7IV Definitions */
#define TBIV_NONE (0x0000) /* No Interrupt pending */
#define TBIV_TBCCR1 (0x0002) /* TBCCR1_CCIFG */
#define TBIV_TBCCR2 (0x0004) /* TBCCR2_CCIFG */
#define TBIV_TBCCR3 (0x0006) /* TBCCR3_CCIFG */
#define TBIV_TBCCR4 (0x0008) /* TBCCR4_CCIFG */
#define TBIV_TBCCR5 (0x000A) /* TBCCR3_CCIFG */
#define TBIV_TBCCR6 (0x000C) /* TBCCR4_CCIFG */
#define TBIV_TBIFG (0x000E) /* TBIFG */
/* Alternate register names - 5xx style */
#define TB0IV_NONE (0x0000) /* No Interrupt pending */
#define TB0IV_TBCCR1 (0x0002) /* TB0CCR1_CCIFG */
#define TB0IV_TBCCR2 (0x0004) /* TB0CCR2_CCIFG */
#define TB0IV_TBCCR3 (0x0006) /* TB0CCR3_CCIFG */
#define TB0IV_TBCCR4 (0x0008) /* TB0CCR4_CCIFG */
#define TB0IV_TBCCR5 (0x000A) /* TB0CCR3_CCIFG */
#define TB0IV_TBCCR6 (0x000C) /* TB0CCR4_CCIFG */
#define TB0IV_TBIFG (0x000E) /* TB0IFG */
/************************************************************
* Basic Clock Module
************************************************************/
#define __MSP430_HAS_BASIC_CLOCK__ /* Definition to show that Module is available */
SFR_8BIT(DCOCTL); /* DCO Clock Frequency Control */
SFR_8BIT(BCSCTL1); /* Basic Clock System Control 1 */
SFR_8BIT(BCSCTL2); /* Basic Clock System Control 2 */
#define MOD0 (0x01) /* Modulation Bit 0 */
#define MOD1 (0x02) /* Modulation Bit 1 */
#define MOD2 (0x04) /* Modulation Bit 2 */
#define MOD3 (0x08) /* Modulation Bit 3 */
#define MOD4 (0x10) /* Modulation Bit 4 */
#define DCO0 (0x20) /* DCO Select Bit 0 */
#define DCO1 (0x40) /* DCO Select Bit 1 */
#define DCO2 (0x80) /* DCO Select Bit 2 */
#define RSEL0 (0x01) /* Range Select Bit 0 */
#define RSEL1 (0x02) /* Range Select Bit 1 */
#define RSEL2 (0x04) /* Range Select Bit 2 */
#define XT5V (0x08) /* XT5V should always be reset */
#define DIVA0 (0x10) /* ACLK Divider 0 */
#define DIVA1 (0x20) /* ACLK Divider 1 */
#define XTS (0x40) /* LFXTCLK 0:Low Freq. / 1: High Freq. */
#define XT2OFF (0x80) /* Enable XT2CLK */
#define DIVA_0 (0x00) /* ACLK Divider 0: /1 */
#define DIVA_1 (0x10) /* ACLK Divider 1: /2 */
#define DIVA_2 (0x20) /* ACLK Divider 2: /4 */
#define DIVA_3 (0x30) /* ACLK Divider 3: /8 */
#define DCOR (0x01) /* Enable External Resistor : 1 */
#define DIVS0 (0x02) /* SMCLK Divider 0 */
#define DIVS1 (0x04) /* SMCLK Divider 1 */
#define SELS (0x08) /* SMCLK Source Select 0:DCOCLK / 1:XT2CLK/LFXTCLK */
#define DIVM0 (0x10) /* MCLK Divider 0 */
#define DIVM1 (0x20) /* MCLK Divider 1 */
#define SELM0 (0x40) /* MCLK Source Select 0 */
#define SELM1 (0x80) /* MCLK Source Select 1 */
#define DIVS_0 (0x00) /* SMCLK Divider 0: /1 */
#define DIVS_1 (0x02) /* SMCLK Divider 1: /2 */
#define DIVS_2 (0x04) /* SMCLK Divider 2: /4 */
#define DIVS_3 (0x06) /* SMCLK Divider 3: /8 */
#define DIVM_0 (0x00) /* MCLK Divider 0: /1 */
#define DIVM_1 (0x10) /* MCLK Divider 1: /2 */
#define DIVM_2 (0x20) /* MCLK Divider 2: /4 */
#define DIVM_3 (0x30) /* MCLK Divider 3: /8 */
#define SELM_0 (0x00) /* MCLK Source Select 0: DCOCLK */
#define SELM_1 (0x40) /* MCLK Source Select 1: DCOCLK */
#define SELM_2 (0x80) /* MCLK Source Select 2: XT2CLK/LFXTCLK */
#define SELM_3 (0xC0) /* MCLK Source Select 3: LFXTCLK */
/************************************************************
* Brown-Out, Supply Voltage Supervision (SVS)
************************************************************/
#define __MSP430_HAS_SVS__ /* Definition to show that Module is available */
SFR_8BIT(SVSCTL); /* SVS Control */
#define SVSFG (0x01) /* SVS Flag */
#define SVSOP (0x02) /* SVS output (read only) */
#define SVSON (0x04) /* Switches the SVS on/off */
#define PORON (0x08) /* Enable POR Generation if Low Voltage */
#define VLD0 (0x10)
#define VLD1 (0x20)
#define VLD2 (0x40)
#define VLD3 (0x80)
#define VLDON (0x10)
#define VLDOFF (0x00)
#define VLD_1_8V (0x10)
/*************************************************************
* Flash Memory
*************************************************************/
#define __MSP430_HAS_FLASH__ /* Definition to show that Module is available */
SFR_16BIT(FCTL1); /* FLASH Control 1 */
SFR_16BIT(FCTL2); /* FLASH Control 2 */
SFR_16BIT(FCTL3); /* FLASH Control 3 */
#define FRKEY (0x9600) /* Flash key returned by read */
#define FWKEY (0xA500) /* Flash key for write */
#define FXKEY (0x3300) /* for use with XOR instruction */
#define ERASE (0x0002) /* Enable bit for Flash segment erase */
#define MERAS (0x0004) /* Enable bit for Flash mass erase */
#define WRT (0x0040) /* Enable bit for Flash write */
#define BLKWRT (0x0080) /* Enable bit for Flash segment write */
#define SEGWRT (0x0080) /* old definition */ /* Enable bit for Flash segment write */
#define FN0 (0x0001) /* Divide Flash clock by 1 to 64 using FN0 to FN5 according to: */
#define FN1 (0x0002) /* 32*FN5 + 16*FN4 + 8*FN3 + 4*FN2 + 2*FN1 + FN0 + 1 */
#ifndef FN2
#define FN2 (0x0004)
#endif
#ifndef FN3
#define FN3 (0x0008)
#endif
#ifndef FN4
#define FN4 (0x0010)
#endif
#define FN5 (0x0020)
#define FSSEL0 (0x0040) /* Flash clock select 0 */ /* to distinguish from USART SSELx */
#define FSSEL1 (0x0080) /* Flash clock select 1 */
#define FSSEL_0 (0x0000) /* Flash clock select: 0 - ACLK */
#define FSSEL_1 (0x0040) /* Flash clock select: 1 - MCLK */
#define FSSEL_2 (0x0080) /* Flash clock select: 2 - SMCLK */
#define FSSEL_3 (0x00C0) /* Flash clock select: 3 - SMCLK */
#define BUSY (0x0001) /* Flash busy: 1 */
#define KEYV (0x0002) /* Flash Key violation flag */
#define ACCVIFG (0x0004) /* Flash Access violation flag */
#define WAIT (0x0008) /* Wait flag for segment write */
#define LOCK (0x0010) /* Lock bit: 1 - Flash is locked (read only) */
#define EMEX (0x0020) /* Flash Emergency Exit */
/************************************************************
* Comparator A
************************************************************/
#define __MSP430_HAS_COMPA__ /* Definition to show that Module is available */
SFR_8BIT(CACTL1); /* Comparator A Control 1 */
SFR_8BIT(CACTL2); /* Comparator A Control 2 */
SFR_8BIT(CAPD); /* Comparator A Port Disable */
#define CAIFG (0x01) /* Comp. A Interrupt Flag */
#define CAIE (0x02) /* Comp. A Interrupt Enable */
#define CAIES (0x04) /* Comp. A Int. Edge Select: 0:rising / 1:falling */
#define CAON (0x08) /* Comp. A enable */
#define CAREF0 (0x10) /* Comp. A Internal Reference Select 0 */
#define CAREF1 (0x20) /* Comp. A Internal Reference Select 1 */
#define CARSEL (0x40) /* Comp. A Internal Reference Enable */
#define CAEX (0x80) /* Comp. A Exchange Inputs */
#define CAREF_0 (0x00) /* Comp. A Int. Ref. Select 0 : Off */
#define CAREF_1 (0x10) /* Comp. A Int. Ref. Select 1 : 0.25*Vcc */
#define CAREF_2 (0x20) /* Comp. A Int. Ref. Select 2 : 0.5*Vcc */
#define CAREF_3 (0x30) /* Comp. A Int. Ref. Select 3 : Vt*/
#define CAOUT (0x01) /* Comp. A Output */
#define CAF (0x02) /* Comp. A Enable Output Filter */
#define P2CA0 (0x04) /* Comp. A Connect External Signal to CA0 : 1 */
#define P2CA1 (0x08) /* Comp. A Connect External Signal to CA1 : 1 */
#define CACTL24 (0x10)
#define CACTL25 (0x20)
#define CACTL26 (0x40)
#define CACTL27 (0x80)
#define CAPD0 (0x01) /* Comp. A Disable Input Buffer of Port Register .0 */
#define CAPD1 (0x02) /* Comp. A Disable Input Buffer of Port Register .1 */
#define CAPD2 (0x04) /* Comp. A Disable Input Buffer of Port Register .2 */
#define CAPD3 (0x08) /* Comp. A Disable Input Buffer of Port Register .3 */
#define CAPD4 (0x10) /* Comp. A Disable Input Buffer of Port Register .4 */
#define CAPD5 (0x20) /* Comp. A Disable Input Buffer of Port Register .5 */
#define CAPD6 (0x40) /* Comp. A Disable Input Buffer of Port Register .6 */
#define CAPD7 (0x80) /* Comp. A Disable Input Buffer of Port Register .7 */
/************************************************************
* ADC12
************************************************************/
#define __MSP430_HAS_ADC12__ /* Definition to show that Module is available */
SFR_16BIT(ADC12CTL0); /* ADC12 Control 0 */
SFR_16BIT(ADC12CTL1); /* ADC12 Control 1 */
SFR_16BIT(ADC12IFG); /* ADC12 Interrupt Flag */
SFR_16BIT(ADC12IE); /* ADC12 Interrupt Enable */
SFR_16BIT(ADC12IV); /* ADC12 Interrupt Vector Word */
#define ADC12MEM_ (0x0140) /* ADC12 Conversion Memory */
#ifdef __ASM_HEADER__
#define ADC12MEM (ADC12MEM_) /* ADC12 Conversion Memory (for assembler) */
#else
#define ADC12MEM ((int*) ADC12MEM_) /* ADC12 Conversion Memory (for C) */
#endif
SFR_16BIT(ADC12MEM0); /* ADC12 Conversion Memory 0 */
SFR_16BIT(ADC12MEM1); /* ADC12 Conversion Memory 1 */
SFR_16BIT(ADC12MEM2); /* ADC12 Conversion Memory 2 */
SFR_16BIT(ADC12MEM3); /* ADC12 Conversion Memory 3 */
SFR_16BIT(ADC12MEM4); /* ADC12 Conversion Memory 4 */
SFR_16BIT(ADC12MEM5); /* ADC12 Conversion Memory 5 */
SFR_16BIT(ADC12MEM6); /* ADC12 Conversion Memory 6 */
SFR_16BIT(ADC12MEM7); /* ADC12 Conversion Memory 7 */
SFR_16BIT(ADC12MEM8); /* ADC12 Conversion Memory 8 */
SFR_16BIT(ADC12MEM9); /* ADC12 Conversion Memory 9 */
SFR_16BIT(ADC12MEM10); /* ADC12 Conversion Memory 10 */
SFR_16BIT(ADC12MEM11); /* ADC12 Conversion Memory 11 */
SFR_16BIT(ADC12MEM12); /* ADC12 Conversion Memory 12 */
SFR_16BIT(ADC12MEM13); /* ADC12 Conversion Memory 13 */
SFR_16BIT(ADC12MEM14); /* ADC12 Conversion Memory 14 */
SFR_16BIT(ADC12MEM15); /* ADC12 Conversion Memory 15 */
#define ADC12MCTL_ (0x0080) /* ADC12 Memory Control */
#ifdef __ASM_HEADER__
#define ADC12MCTL (ADC12MCTL_) /* ADC12 Memory Control (for assembler) */
#else
#define ADC12MCTL ((char*) ADC12MCTL_) /* ADC12 Memory Control (for C) */
#endif
SFR_8BIT(ADC12MCTL0); /* ADC12 Memory Control 0 */
SFR_8BIT(ADC12MCTL1); /* ADC12 Memory Control 1 */
SFR_8BIT(ADC12MCTL2); /* ADC12 Memory Control 2 */
SFR_8BIT(ADC12MCTL3); /* ADC12 Memory Control 3 */
SFR_8BIT(ADC12MCTL4); /* ADC12 Memory Control 4 */
SFR_8BIT(ADC12MCTL5); /* ADC12 Memory Control 5 */
SFR_8BIT(ADC12MCTL6); /* ADC12 Memory Control 6 */
SFR_8BIT(ADC12MCTL7); /* ADC12 Memory Control 7 */
SFR_8BIT(ADC12MCTL8); /* ADC12 Memory Control 8 */
SFR_8BIT(ADC12MCTL9); /* ADC12 Memory Control 9 */
SFR_8BIT(ADC12MCTL10); /* ADC12 Memory Control 10 */
SFR_8BIT(ADC12MCTL11); /* ADC12 Memory Control 11 */
SFR_8BIT(ADC12MCTL12); /* ADC12 Memory Control 12 */
SFR_8BIT(ADC12MCTL13); /* ADC12 Memory Control 13 */
SFR_8BIT(ADC12MCTL14); /* ADC12 Memory Control 14 */
SFR_8BIT(ADC12MCTL15); /* ADC12 Memory Control 15 */
/* ADC12CTL0 */
#define ADC12SC (0x001) /* ADC12 Start Conversion */
#define ENC (0x002) /* ADC12 Enable Conversion */
#define ADC12TOVIE (0x004) /* ADC12 Timer Overflow interrupt enable */
#define ADC12OVIE (0x008) /* ADC12 Overflow interrupt enable */
#define ADC12ON (0x010) /* ADC12 On/enable */
#define REFON (0x020) /* ADC12 Reference on */
#define REF2_5V (0x040) /* ADC12 Ref 0:1.5V / 1:2.5V */
#define MSC (0x080) /* ADC12 Multiple SampleConversion */
#define SHT00 (0x0100) /* ADC12 Sample Hold 0 Select 0 */
#define SHT01 (0x0200) /* ADC12 Sample Hold 0 Select 1 */
#define SHT02 (0x0400) /* ADC12 Sample Hold 0 Select 2 */
#define SHT03 (0x0800) /* ADC12 Sample Hold 0 Select 3 */
#define SHT10 (0x1000) /* ADC12 Sample Hold 0 Select 0 */
#define SHT11 (0x2000) /* ADC12 Sample Hold 1 Select 1 */
#define SHT12 (0x4000) /* ADC12 Sample Hold 2 Select 2 */
#define SHT13 (0x8000) /* ADC12 Sample Hold 3 Select 3 */
#define MSH (0x080)
#define SHT0_0 (0*0x100u) /* ADC12 Sample Hold 0 Select Bit: 0 */
#define SHT0_1 (1*0x100u) /* ADC12 Sample Hold 0 Select Bit: 1 */
#define SHT0_2 (2*0x100u) /* ADC12 Sample Hold 0 Select Bit: 2 */
#define SHT0_3 (3*0x100u) /* ADC12 Sample Hold 0 Select Bit: 3 */
#define SHT0_4 (4*0x100u) /* ADC12 Sample Hold 0 Select Bit: 4 */
#define SHT0_5 (5*0x100u) /* ADC12 Sample Hold 0 Select Bit: 5 */
#define SHT0_6 (6*0x100u) /* ADC12 Sample Hold 0 Select Bit: 6 */
#define SHT0_7 (7*0x100u) /* ADC12 Sample Hold 0 Select Bit: 7 */
#define SHT0_8 (8*0x100u) /* ADC12 Sample Hold 0 Select Bit: 8 */
#define SHT0_9 (9*0x100u) /* ADC12 Sample Hold 0 Select Bit: 9 */
#define SHT0_10 (10*0x100u) /* ADC12 Sample Hold 0 Select Bit: 10 */
#define SHT0_11 (11*0x100u) /* ADC12 Sample Hold 0 Select Bit: 11 */
#define SHT0_12 (12*0x100u) /* ADC12 Sample Hold 0 Select Bit: 12 */
#define SHT0_13 (13*0x100u) /* ADC12 Sample Hold 0 Select Bit: 13 */
#define SHT0_14 (14*0x100u) /* ADC12 Sample Hold 0 Select Bit: 14 */
#define SHT0_15 (15*0x100u) /* ADC12 Sample Hold 0 Select Bit: 15 */
#define SHT1_0 (0*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 0 */
#define SHT1_1 (1*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 1 */
#define SHT1_2 (2*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 2 */
#define SHT1_3 (3*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 3 */
#define SHT1_4 (4*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 4 */
#define SHT1_5 (5*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 5 */
#define SHT1_6 (6*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 6 */
#define SHT1_7 (7*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 7 */
#define SHT1_8 (8*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 8 */
#define SHT1_9 (9*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 9 */
#define SHT1_10 (10*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 10 */
#define SHT1_11 (11*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 11 */
#define SHT1_12 (12*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 12 */
#define SHT1_13 (13*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 13 */
#define SHT1_14 (14*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 14 */
#define SHT1_15 (15*0x1000u) /* ADC12 Sample Hold 1 Select Bit: 15 */
/* ADC12CTL1 */
#define ADC12BUSY (0x0001) /* ADC12 Busy */
#define CONSEQ0 (0x0002) /* ADC12 Conversion Sequence Select 0 */
#define CONSEQ1 (0x0004) /* ADC12 Conversion Sequence Select 1 */
#define ADC12SSEL0 (0x0008) /* ADC12 Clock Source Select 0 */
#define ADC12SSEL1 (0x0010) /* ADC12 Clock Source Select 1 */
#define ADC12DIV0 (0x0020) /* ADC12 Clock Divider Select 0 */
#define ADC12DIV1 (0x0040) /* ADC12 Clock Divider Select 1 */
#define ADC12DIV2 (0x0080) /* ADC12 Clock Divider Select 2 */
#define ISSH (0x0100) /* ADC12 Invert Sample Hold Signal */
#define SHP (0x0200) /* ADC12 Sample/Hold Pulse Mode */
#define SHS0 (0x0400) /* ADC12 Sample/Hold Source 0 */
#define SHS1 (0x0800) /* ADC12 Sample/Hold Source 1 */
#define CSTARTADD0 (0x1000) /* ADC12 Conversion Start Address 0 */
#define CSTARTADD1 (0x2000) /* ADC12 Conversion Start Address 1 */
#define CSTARTADD2 (0x4000) /* ADC12 Conversion Start Address 2 */
#define CSTARTADD3 (0x8000) /* ADC12 Conversion Start Address 3 */
#define CONSEQ_0 (0*2u) /* ADC12 Conversion Sequence Select: 0 */
#define CONSEQ_1 (1*2u) /* ADC12 Conversion Sequence Select: 1 */
#define CONSEQ_2 (2*2u) /* ADC12 Conversion Sequence Select: 2 */
#define CONSEQ_3 (3*2u) /* ADC12 Conversion Sequence Select: 3 */
#define ADC12SSEL_0 (0*8u) /* ADC12 Clock Source Select: 0 */
#define ADC12SSEL_1 (1*8u) /* ADC12 Clock Source Select: 1 */
#define ADC12SSEL_2 (2*8u) /* ADC12 Clock Source Select: 2 */
#define ADC12SSEL_3 (3*8u) /* ADC12 Clock Source Select: 3 */
#define ADC12DIV_0 (0*0x20u) /* ADC12 Clock Divider Select: 0 */
#define ADC12DIV_1 (1*0x20u) /* ADC12 Clock Divider Select: 1 */
#define ADC12DIV_2 (2*0x20u) /* ADC12 Clock Divider Select: 2 */
#define ADC12DIV_3 (3*0x20u) /* ADC12 Clock Divider Select: 3 */
#define ADC12DIV_4 (4*0x20u) /* ADC12 Clock Divider Select: 4 */
#define ADC12DIV_5 (5*0x20u) /* ADC12 Clock Divider Select: 5 */
#define ADC12DIV_6 (6*0x20u) /* ADC12 Clock Divider Select: 6 */
#define ADC12DIV_7 (7*0x20u) /* ADC12 Clock Divider Select: 7 */
#define SHS_0 (0*0x400u) /* ADC12 Sample/Hold Source: 0 */
#define SHS_1 (1*0x400u) /* ADC12 Sample/Hold Source: 1 */
#define SHS_2 (2*0x400u) /* ADC12 Sample/Hold Source: 2 */
#define SHS_3 (3*0x400u) /* ADC12 Sample/Hold Source: 3 */
#define CSTARTADD_0 (0*0x1000u) /* ADC12 Conversion Start Address: 0 */
#define CSTARTADD_1 (1*0x1000u) /* ADC12 Conversion Start Address: 1 */
#define CSTARTADD_2 (2*0x1000u) /* ADC12 Conversion Start Address: 2 */
#define CSTARTADD_3 (3*0x1000u) /* ADC12 Conversion Start Address: 3 */
#define CSTARTADD_4 (4*0x1000u) /* ADC12 Conversion Start Address: 4 */
#define CSTARTADD_5 (5*0x1000u) /* ADC12 Conversion Start Address: 5 */
#define CSTARTADD_6 (6*0x1000u) /* ADC12 Conversion Start Address: 6 */
#define CSTARTADD_7 (7*0x1000u) /* ADC12 Conversion Start Address: 7 */
#define CSTARTADD_8 (8*0x1000u) /* ADC12 Conversion Start Address: 8 */
#define CSTARTADD_9 (9*0x1000u) /* ADC12 Conversion Start Address: 9 */
#define CSTARTADD_10 (10*0x1000u) /* ADC12 Conversion Start Address: 10 */
#define CSTARTADD_11 (11*0x1000u) /* ADC12 Conversion Start Address: 11 */
#define CSTARTADD_12 (12*0x1000u) /* ADC12 Conversion Start Address: 12 */
#define CSTARTADD_13 (13*0x1000u) /* ADC12 Conversion Start Address: 13 */
#define CSTARTADD_14 (14*0x1000u) /* ADC12 Conversion Start Address: 14 */
#define CSTARTADD_15 (15*0x1000u) /* ADC12 Conversion Start Address: 15 */
/* ADC12MCTLx */
#define INCH0 (0x0001) /* ADC12 Input Channel Select Bit 0 */
#define INCH1 (0x0002) /* ADC12 Input Channel Select Bit 1 */
#define INCH2 (0x0004) /* ADC12 Input Channel Select Bit 2 */
#define INCH3 (0x0008) /* ADC12 Input Channel Select Bit 3 */
#define SREF0 (0x0010) /* ADC12 Select Reference Bit 0 */
#define SREF1 (0x0020) /* ADC12 Select Reference Bit 1 */
#define SREF2 (0x0040) /* ADC12 Select Reference Bit 2 */
#define EOS (0x0080) /* ADC12 End of Sequence */
#define INCH_0 (0) /* ADC12 Input Channel 0 */
#define INCH_1 (1) /* ADC12 Input Channel 1 */
#define INCH_2 (2) /* ADC12 Input Channel 2 */
#define INCH_3 (3) /* ADC12 Input Channel 3 */
#define INCH_4 (4) /* ADC12 Input Channel 4 */
#define INCH_5 (5) /* ADC12 Input Channel 5 */
#define INCH_6 (6) /* ADC12 Input Channel 6 */
#define INCH_7 (7) /* ADC12 Input Channel 7 */
#define INCH_8 (8) /* ADC12 Input Channel 8 */
#define INCH_9 (9) /* ADC12 Input Channel 9 */
#define INCH_10 (10) /* ADC12 Input Channel 10 */
#define INCH_11 (11) /* ADC12 Input Channel 11 */
#define INCH_12 (12) /* ADC12 Input Channel 12 */
#define INCH_13 (13) /* ADC12 Input Channel 13 */
#define INCH_14 (14) /* ADC12 Input Channel 14 */
#define INCH_15 (15) /* ADC12 Input Channel 15 */
#define SREF_0 (0*0x10u) /* ADC12 Select Reference 0 */
#define SREF_1 (1*0x10u) /* ADC12 Select Reference 1 */
#define SREF_2 (2*0x10u) /* ADC12 Select Reference 2 */
#define SREF_3 (3*0x10u) /* ADC12 Select Reference 3 */
#define SREF_4 (4*0x10u) /* ADC12 Select Reference 4 */
#define SREF_5 (5*0x10u) /* ADC12 Select Reference 5 */
#define SREF_6 (6*0x10u) /* ADC12 Select Reference 6 */
#define SREF_7 (7*0x10u) /* ADC12 Select Reference 7 */
/* ADC12IV Definitions */
#define ADC12IV_NONE (0x0000) /* No Interrupt pending */
#define ADC12IV_ADC12OVIFG (0x0002) /* ADC12OVIFG */
#define ADC12IV_ADC12TOVIFG (0x0004) /* ADC12TOVIFG */
#define ADC12IV_ADC12IFG0 (0x0006) /* ADC12IFG0 */
#define ADC12IV_ADC12IFG1 (0x0008) /* ADC12IFG1 */
#define ADC12IV_ADC12IFG2 (0x000A) /* ADC12IFG2 */
#define ADC12IV_ADC12IFG3 (0x000C) /* ADC12IFG3 */
#define ADC12IV_ADC12IFG4 (0x000E) /* ADC12IFG4 */
#define ADC12IV_ADC12IFG5 (0x0010) /* ADC12IFG5 */
#define ADC12IV_ADC12IFG6 (0x0012) /* ADC12IFG6 */
#define ADC12IV_ADC12IFG7 (0x0014) /* ADC12IFG7 */
#define ADC12IV_ADC12IFG8 (0x0016) /* ADC12IFG8 */
#define ADC12IV_ADC12IFG9 (0x0018) /* ADC12IFG9 */
#define ADC12IV_ADC12IFG10 (0x001A) /* ADC12IFG10 */
#define ADC12IV_ADC12IFG11 (0x001C) /* ADC12IFG11 */
#define ADC12IV_ADC12IFG12 (0x001E) /* ADC12IFG12 */
#define ADC12IV_ADC12IFG13 (0x0020) /* ADC12IFG13 */
#define ADC12IV_ADC12IFG14 (0x0022) /* ADC12IFG14 */
#define ADC12IV_ADC12IFG15 (0x0024) /* ADC12IFG15 */
/************************************************************
* DAC12
************************************************************/
#define __MSP430_HAS_DAC12_2__ /* Definition to show that Module is available */
SFR_16BIT(DAC12_0CTL); /* DAC12_0 Control */
SFR_16BIT(DAC12_1CTL); /* DAC12_1 Control */
#define DAC12GRP (0x0001) /* DAC12 group */
#define DAC12ENC (0x0002) /* DAC12 enable conversion */
#define DAC12IFG (0x0004) /* DAC12 interrupt flag */
#define DAC12IE (0x0008) /* DAC12 interrupt enable */
#define DAC12DF (0x0010) /* DAC12 data format */
#define DAC12AMP0 (0x0020) /* DAC12 amplifier bit 0 */
#define DAC12AMP1 (0x0040) /* DAC12 amplifier bit 1 */
#define DAC12AMP2 (0x0080) /* DAC12 amplifier bit 2 */
#define DAC12IR (0x0100) /* DAC12 input reference and output range */
#define DAC12CALON (0x0200) /* DAC12 calibration */
#define DAC12LSEL0 (0x0400) /* DAC12 load select bit 0 */
#define DAC12LSEL1 (0x0800) /* DAC12 load select bit 1 */
#define DAC12RES (0x1000) /* DAC12 resolution */
#define DAC12SREF0 (0x2000) /* DAC12 reference bit 0 */
#define DAC12SREF1 (0x4000) /* DAC12 reference bit 1 */
#define DAC12AMP_0 (0*0x0020u) /* DAC12 amplifier 0: off, 3-state */
#define DAC12AMP_1 (1*0x0020u) /* DAC12 amplifier 1: off, off */
#define DAC12AMP_2 (2*0x0020u) /* DAC12 amplifier 2: low, low */
#define DAC12AMP_3 (3*0x0020u) /* DAC12 amplifier 3: low, medium */
#define DAC12AMP_4 (4*0x0020u) /* DAC12 amplifier 4: low, high */
#define DAC12AMP_5 (5*0x0020u) /* DAC12 amplifier 5: medium, medium */
#define DAC12AMP_6 (6*0x0020u) /* DAC12 amplifier 6: medium, high */
#define DAC12AMP_7 (7*0x0020u) /* DAC12 amplifier 7: high, high */
#define DAC12LSEL_0 (0*0x0400u) /* DAC12 load select 0: direct */
#define DAC12LSEL_1 (1*0x0400u) /* DAC12 load select 1: latched with DAT */
#define DAC12LSEL_2 (2*0x0400u) /* DAC12 load select 2: latched with pos. Timer_A3.OUT1 */
#define DAC12LSEL_3 (3*0x0400u) /* DAC12 load select 3: latched with pos. Timer_B7.OUT1 */
#define DAC12SREF_0 (0*0x2000u) /* DAC12 reference 0: Vref+ */
#define DAC12SREF_1 (1*0x2000u) /* DAC12 reference 1: Vref+ */
#define DAC12SREF_2 (2*0x2000u) /* DAC12 reference 2: Veref+ */
#define DAC12SREF_3 (3*0x2000u) /* DAC12 reference 3: Veref+ */
SFR_16BIT(DAC12_0DAT); /* DAC12_0 Data */
SFR_16BIT(DAC12_1DAT); /* DAC12_1 Data */
/************************************************************
* DMA
************************************************************/
#define __MSP430_HAS_DMA_3__ /* Definition to show that Module is available */
SFR_16BIT(DMACTL0); /* DMA Module Control 0 */
#define DMA0TSEL0 (0x0001) /* DMA channel 0 transfer select bit 0 */
#define DMA0TSEL1 (0x0002) /* DMA channel 0 transfer select bit 1 */
#define DMA0TSEL2 (0x0004) /* DMA channel 0 transfer select bit 2 */
#define DMA0TSEL3 (0x0008) /* DMA channel 0 transfer select bit 3 */
#define DMA1TSEL0 (0x0010) /* DMA channel 1 transfer select bit 0 */
#define DMA1TSEL1 (0x0020) /* DMA channel 1 transfer select bit 1 */
#define DMA1TSEL2 (0x0040) /* DMA channel 1 transfer select bit 2 */
#define DMA1TSEL3 (0x0080) /* DMA channel 1 transfer select bit 3 */
#define DMA2TSEL0 (0x0100) /* DMA channel 2 transfer select bit 0 */
#define DMA2TSEL1 (0x0200) /* DMA channel 2 transfer select bit 1 */
#define DMA2TSEL2 (0x0400) /* DMA channel 2 transfer select bit 2 */
#define DMA2TSEL3 (0x0800) /* DMA channel 2 transfer select bit 3 */
#define DMA0TSEL_0 (0*0x0001u) /* DMA channel 0 transfer select 0: DMA_REQ (sw)*/
#define DMA0TSEL_1 (1*0x0001u) /* DMA channel 0 transfer select 1: Timer_A (TACCR2.IFG) */
#define DMA0TSEL_2 (2*0x0001u) /* DMA channel 0 transfer select 2: Timer_B (TBCCR2.IFG) */
#define DMA0TSEL_3 (3*0x0001u) /* DMA channel 0 transfer select 3: UART0/I2C receive */
#define DMA0TSEL_4 (4*0x0001u) /* DMA channel 0 transfer select 4: UART0/I2C transmit */
#define DMA0TSEL_5 (5*0x0001u) /* DMA channel 0 transfer select 5: DAC12_0CTL.DAC12IFG */
#define DMA0TSEL_6 (6*0x0001u) /* DMA channel 0 transfer select 6: ADC12 (ADC12IFG) */
#define DMA0TSEL_7 (7*0x0001u) /* DMA channel 0 transfer select 7: Timer_A (TACCR0.IFG) */
#define DMA0TSEL_8 (8*0x0001u) /* DMA channel 0 transfer select 8: Timer_B (TBCCR0.IFG) */
#define DMA0TSEL_9 (9*0x0001u) /* DMA channel 0 transfer select 9: UART1 receive */
#define DMA0TSEL_10 (10*0x0001u) /* DMA channel 0 transfer select 10: UART1 transmit */
#define DMA0TSEL_11 (11*0x0001u) /* DMA channel 0 transfer select 11: Multiplier ready */
#define DMA0TSEL_14 (14*0x0001u) /* DMA channel 0 transfer select 14: previous DMA channel DMA2IFG */
#define DMA0TSEL_15 (15*0x0001u) /* DMA channel 0 transfer select 15: ext. Trigger (DMAE0) */
#define DMA1TSEL_0 (0*0x0010u) /* DMA channel 1 transfer select 0: DMA_REQ */
#define DMA1TSEL_1 (1*0x0010u) /* DMA channel 1 transfer select 1: Timer_A CCRIFG.2 */
#define DMA1TSEL_2 (2*0x0010u) /* DMA channel 1 transfer select 2: Timer_B CCRIFG.2 */
#define DMA1TSEL_3 (3*0x0010u) /* DMA channel 1 transfer select 3: UART0/I2C receive */
#define DMA1TSEL_4 (4*0x0010u) /* DMA channel 1 transfer select 4: UART0/I2C transmit */
#define DMA1TSEL_5 (5*0x0010u) /* DMA channel 1 transfer select 5: DAC12.0IFG */
#define DMA1TSEL_6 (6*0x0010u) /* DMA channel 1 transfer select 6: ADC12 (ADC12IFG) */
#define DMA1TSEL_7 (7*0x0010u) /* DMA channel 1 transfer select 7: Timer_A (TACCR0.IFG) */
#define DMA1TSEL_8 (8*0x0010u) /* DMA channel 1 transfer select 8: Timer_B (TBCCR0.IFG) */
#define DMA1TSEL_9 (9*0x0010u) /* DMA channel 1 transfer select 9: UART1 receive */
#define DMA1TSEL_10 (10*0x0010u) /* DMA channel 1 transfer select 10: UART1 transmit */
#define DMA1TSEL_11 (11*0x0010u) /* DMA channel 1 transfer select 11: Multiplier ready */
#define DMA1TSEL_14 (14*0x0010u) /* DMA channel 1 transfer select 14: previous DMA channel DMA0IFG */
#define DMA1TSEL_15 (15*0x0010u) /* DMA channel 1 transfer select 15: ext. Trigger (DMAE0) */
#define DMA2TSEL_0 (0*0x0100u) /* DMA channel 2 transfer select 0: DMA_REQ */
#define DMA2TSEL_1 (1*0x0100u) /* DMA channel 2 transfer select 1: Timer_A CCRIFG.2 */
#define DMA2TSEL_2 (2*0x0100u) /* DMA channel 2 transfer select 2: Timer_B CCRIFG.2 */
#define DMA2TSEL_3 (3*0x0100u) /* DMA channel 2 transfer select 3: UART0/I2C receive */
#define DMA2TSEL_4 (4*0x0100u) /* DMA channel 2 transfer select 4: UART0/I2C transmit */
#define DMA2TSEL_5 (5*0x0100u) /* DMA channel 2 transfer select 5: DAC12.0IFG */
#define DMA2TSEL_6 (6*0x0100u) /* DMA channel 2 transfer select 6: ADC12 (ADC12IFG) */
#define DMA2TSEL_7 (7*0x0100u) /* DMA channel 2 transfer select 7: Timer_A (TACCR0.IFG) */
#define DMA2TSEL_8 (8*0x0100u) /* DMA channel 2 transfer select 8: Timer_B (TBCCR0.IFG) */
#define DMA2TSEL_9 (9*0x0100u) /* DMA channel 2 transfer select 9: UART1 receive */
#define DMA2TSEL_10 (10*0x0100u) /* DMA channel 2 transfer select 10: UART1 transmit */
#define DMA2TSEL_11 (11*0x0100u) /* DMA channel 2 transfer select 11: Multiplier ready */
#define DMA2TSEL_14 (14*0x0100u) /* DMA channel 2 transfer select 14: previous DMA channel DMA1IFG */
#define DMA2TSEL_15 (15*0x0100u) /* DMA channel 2 transfer select 15: ext. Trigger (DMAE0) */
SFR_16BIT(DMACTL1); /* DMA Module Control 1 */
#define ENNMI (0x0001) /* Enable NMI interruption of DMA */
#define ROUNDROBIN (0x0002) /* Round-Robin DMA channel priorities */
#define DMAONFETCH (0x0004) /* DMA transfer on instruction fetch */
SFR_16BIT(DMA0CTL); /* DMA Channel 0 Control */
SFR_16BIT(DMA1CTL); /* DMA Channel 1 Control */
SFR_16BIT(DMA2CTL); /* DMA Channel 2 Control */
#define DMAREQ (0x0001) /* Initiate DMA transfer with DMATSEL */
#define DMAABORT (0x0002) /* DMA transfer aborted by NMI */
#define DMAIE (0x0004) /* DMA interrupt enable */
#define DMAIFG (0x0008) /* DMA interrupt flag */
#define DMAEN (0x0010) /* DMA enable */
#define DMALEVEL (0x0020) /* DMA level sensitive trigger select */
#define DMASRCBYTE (0x0040) /* DMA source byte */
#define DMADSTBYTE (0x0080) /* DMA destination byte */
#define DMASRCINCR0 (0x0100) /* DMA source increment bit 0 */
#define DMASRCINCR1 (0x0200) /* DMA source increment bit 1 */
#define DMADSTINCR0 (0x0400) /* DMA destination increment bit 0 */
#define DMADSTINCR1 (0x0800) /* DMA destination increment bit 1 */
#define DMADT0 (0x1000) /* DMA transfer mode bit 0 */
#define DMADT1 (0x2000) /* DMA transfer mode bit 1 */
#define DMADT2 (0x4000) /* DMA transfer mode bit 2 */
#define DMASWDW (0*0x0040u) /* DMA transfer: source word to destination word */
#define DMASBDW (1*0x0040u) /* DMA transfer: source byte to destination word */
#define DMASWDB (2*0x0040u) /* DMA transfer: source word to destination byte */
#define DMASBDB (3*0x0040u) /* DMA transfer: source byte to destination byte */
#define DMASRCINCR_0 (0*0x0100u) /* DMA source increment 0: source address unchanged */
#define DMASRCINCR_1 (1*0x0100u) /* DMA source increment 1: source address unchanged */
#define DMASRCINCR_2 (2*0x0100u) /* DMA source increment 2: source address decremented */
#define DMASRCINCR_3 (3*0x0100u) /* DMA source increment 3: source address incremented */
#define DMADSTINCR_0 (0*0x0400u) /* DMA destination increment 0: destination address unchanged */
#define DMADSTINCR_1 (1*0x0400u) /* DMA destination increment 1: destination address unchanged */
#define DMADSTINCR_2 (2*0x0400u) /* DMA destination increment 2: destination address decremented */
#define DMADSTINCR_3 (3*0x0400u) /* DMA destination increment 3: destination address incremented */
#define DMADT_0 (0*0x1000u) /* DMA transfer mode 0: single */
#define DMADT_1 (1*0x1000u) /* DMA transfer mode 1: block */
#define DMADT_2 (2*0x1000u) /* DMA transfer mode 2: interleaved */
#define DMADT_3 (3*0x1000u) /* DMA transfer mode 3: interleaved */
#define DMADT_4 (4*0x1000u) /* DMA transfer mode 4: single, repeat */
#define DMADT_5 (5*0x1000u) /* DMA transfer mode 5: block, repeat */
#define DMADT_6 (6*0x1000u) /* DMA transfer mode 6: interleaved, repeat */
#define DMADT_7 (7*0x1000u) /* DMA transfer mode 7: interleaved, repeat */
SFR_16BIT(DMA0SA); /* DMA Channel 0 Source Address */
SFR_16BIT(DMA0DA); /* DMA Channel 0 Destination Address */
SFR_16BIT(DMA0SZ); /* DMA Channel 0 Transfer Size */
SFR_16BIT(DMA1SA); /* DMA Channel 1 Source Address */
SFR_16BIT(DMA1DA); /* DMA Channel 1 Destination Address */
SFR_16BIT(DMA1SZ); /* DMA Channel 1 Transfer Size */
SFR_16BIT(DMA2SA); /* DMA Channel 2 Source Address */
SFR_16BIT(DMA2DA); /* DMA Channel 2 Destination Address */
SFR_16BIT(DMA2SZ); /* DMA Channel 2 Transfer Size */
/************************************************************
* Interrupt Vectors (offset from 0xFFE0)
************************************************************/
#define VECTOR_NAME(name) name##_ptr
#define EMIT_PRAGMA(x) _Pragma(#x)
#define CREATE_VECTOR(name) void (* const VECTOR_NAME(name))(void) = &name
#define PLACE_VECTOR(vector,section) EMIT_PRAGMA(DATA_SECTION(vector,section))
#define ISR_VECTOR(func,offset) CREATE_VECTOR(func); \
PLACE_VECTOR(VECTOR_NAME(func), offset)
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define DACDMA_VECTOR ".int00" /* 0xFFE0 DAC/DMA */
#else
#define DACDMA_VECTOR (0 * 1u) /* 0xFFE0 DAC/DMA */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define PORT2_VECTOR ".int01" /* 0xFFE2 Port 2 */
#else
#define PORT2_VECTOR (1 * 1u) /* 0xFFE2 Port 2 */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define USART1TX_VECTOR ".int02" /* 0xFFE4 USART 1 Transmit */
#else
#define USART1TX_VECTOR (2 * 1u) /* 0xFFE4 USART 1 Transmit */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define USART1RX_VECTOR ".int03" /* 0xFFE6 USART 1 Receive */
#else
#define USART1RX_VECTOR (3 * 1u) /* 0xFFE6 USART 1 Receive */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define PORT1_VECTOR ".int04" /* 0xFFE8 Port 1 */
#else
#define PORT1_VECTOR (4 * 1u) /* 0xFFE8 Port 1 */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define TIMERA1_VECTOR ".int05" /* 0xFFEA Timer A CC1-2, TA */
#else
#define TIMERA1_VECTOR (5 * 1u) /* 0xFFEA Timer A CC1-2, TA */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define TIMERA0_VECTOR ".int06" /* 0xFFEC Timer A CC0 */
#else
#define TIMERA0_VECTOR (6 * 1u) /* 0xFFEC Timer A CC0 */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define ADC12_VECTOR ".int07" /* 0xFFEE ADC */
#else
#define ADC12_VECTOR (7 * 1u) /* 0xFFEE ADC */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define USART0TX_VECTOR ".int08" /* 0xFFF0 USART 0 Transmit */
#else
#define USART0TX_VECTOR (8 * 1u) /* 0xFFF0 USART 0 Transmit */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define USART0RX_VECTOR ".int09" /* 0xFFF2 USART 0 Receive */
#else
#define USART0RX_VECTOR (9 * 1u) /* 0xFFF2 USART 0 Receive */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define WDT_VECTOR ".int10" /* 0xFFF4 Watchdog Timer */
#else
#define WDT_VECTOR (10 * 1u) /* 0xFFF4 Watchdog Timer */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define COMPARATORA_VECTOR ".int11" /* 0xFFF6 Comparator A */
#else
#define COMPARATORA_VECTOR (11 * 1u) /* 0xFFF6 Comparator A */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define TIMERB1_VECTOR ".int12" /* 0xFFF8 Timer B CC1-6, TB */
#else
#define TIMERB1_VECTOR (12 * 1u) /* 0xFFF8 Timer B CC1-6, TB */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define TIMERB0_VECTOR ".int13" /* 0xFFFA Timer B CC0 */
#else
#define TIMERB0_VECTOR (13 * 1u) /* 0xFFFA Timer B CC0 */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define NMI_VECTOR ".int14" /* 0xFFFC Non-maskable */
#else
#define NMI_VECTOR (14 * 1u) /* 0xFFFC Non-maskable */
#endif
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
#define RESET_VECTOR ".reset" /* 0xFFFE Reset [Highest Priority] */
#else
#define RESET_VECTOR (15 * 1u) /* 0xFFFE Reset [Highest Priority] */
#endif
/************************************************************
* End of Modules
************************************************************/
#ifdef __cplusplus
}
#endif /* extern "C" */
#endif /* #ifndef __msp430x16x */
2. in430.h
/* ============================================================================ */
/* Copyright (c) 2013, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
#ifndef __IN430_H
#define __IN430_H
/*----------------------------------------------------------------------------*/
/* INTRINSIC MAPPING FOR IAR V1.XX */
/*----------------------------------------------------------------------------*/
#define _EINT() __enable_interrupt()
#define _DINT() __disable_interrupt()
#define _BIC_SR(x) __bic_SR_register(x)
#define _BIC_SR_IRQ(x) __bic_SR_register_on_exit(x)
#define _BIS_SR(x) __bis_SR_register(x)
#define _BIS_SR_IRQ(x) __bis_SR_register_on_exit(x)
#define _SWAP_BYTES(x) __swap_bytes(x)
#define _NOP() __no_operation()
#endif /* __IN430_H */
3. lnk_mspf169.cmd
/* ============================================================================ */
/* Copyright (c) 2020, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
/******************************************************************************/
/* lnk_msp430f169.cmd - LINKER COMMAND FILE FOR LINKING MSP430F169 PROGRAMS */
/* */
/* Usage: lnk430 <obj files...> -o <out file> -m <map file> lnk.cmd */
/* cl430 <src files...> -z -o <out file> -m <map file> lnk.cmd */
/* */
/*----------------------------------------------------------------------------*/
/* These linker options are for command line linking only. For IDE linking, */
/* you should set your linker options in Project Properties */
/* -c LINK USING C CONVENTIONS */
/* -stack 0x0100 SOFTWARE STACK SIZE */
/* -heap 0x0100 HEAP AREA SIZE */
/* */
/*----------------------------------------------------------------------------*/
/* Version: 1.210 */
/*----------------------------------------------------------------------------*/
/****************************************************************************/
/* Specify the system memory map */
/****************************************************************************/
MEMORY
{
SFR : origin = 0x0000, length = 0x0010
PERIPHERALS_8BIT : origin = 0x0010, length = 0x00F0
PERIPHERALS_16BIT : origin = 0x0100, length = 0x0100
RAM : origin = 0x0200, length = 0x0800
INFOA : origin = 0x1080, length = 0x0080
INFOB : origin = 0x1000, length = 0x0080
FLASH : origin = 0x1100, length = 0xEEE0
INT00 : origin = 0xFFE0, length = 0x0002
INT01 : origin = 0xFFE2, length = 0x0002
INT02 : origin = 0xFFE4, length = 0x0002
INT03 : origin = 0xFFE6, length = 0x0002
INT04 : origin = 0xFFE8, length = 0x0002
INT05 : origin = 0xFFEA, length = 0x0002
INT06 : origin = 0xFFEC, length = 0x0002
INT07 : origin = 0xFFEE, length = 0x0002
INT08 : origin = 0xFFF0, length = 0x0002
INT09 : origin = 0xFFF2, length = 0x0002
INT10 : origin = 0xFFF4, length = 0x0002
INT11 : origin = 0xFFF6, length = 0x0002
INT12 : origin = 0xFFF8, length = 0x0002
INT13 : origin = 0xFFFA, length = 0x0002
INT14 : origin = 0xFFFC, length = 0x0002
RESET : origin = 0xFFFE, length = 0x0002
}
/****************************************************************************/
/* Specify the sections allocation into memory */
/****************************************************************************/
SECTIONS
{
.bss : {} > RAM /* Global & static vars */
.data : {} > RAM /* Global & static vars */
.TI.noinit : {} > RAM /* For #pragma noinit */
.sysmem : {} > RAM /* Dynamic memory allocation area */
.stack : {} > RAM (HIGH) /* Software system stack */
.text : {} > FLASH /* Code */
.cinit : {} > FLASH /* Initialization tables */
.const : {} > FLASH /* Constant data */
.cio : {} > RAM /* C I/O Buffer */
.pinit : {} > FLASH /* C++ Constructor tables */
.binit : {} > FLASH /* Boot-time Initialization tables */
.init_array : {} > FLASH /* C++ Constructor tables */
.mspabi.exidx : {} > FLASH /* C++ Constructor tables */
.mspabi.extab : {} > FLASH /* C++ Constructor tables */
#ifdef __TI_COMPILER_VERSION__
#if __TI_COMPILER_VERSION__ >= 15009000
#ifndef __LARGE_CODE_MODEL__
.TI.ramfunc : {} load=FLASH, run=RAM, table(BINIT)
#else
.TI.ramfunc : {} load=FLASH | FLASH2, run=RAM, table(BINIT)
#endif
#endif
#endif
.infoA : {} > INFOA /* MSP430 INFO FLASH Memory segments */
.infoB : {} > INFOB
/* MSP430 Interrupt vectors */
DACDMA : { * ( .int00 ) } > INT00 type = VECT_INIT
PORT2 : { * ( .int01 ) } > INT01 type = VECT_INIT
USART1TX : { * ( .int02 ) } > INT02 type = VECT_INIT
USART1RX : { * ( .int03 ) } > INT03 type = VECT_INIT
PORT1 : { * ( .int04 ) } > INT04 type = VECT_INIT
TIMERA1 : { * ( .int05 ) } > INT05 type = VECT_INIT
TIMERA0 : { * ( .int06 ) } > INT06 type = VECT_INIT
ADC12 : { * ( .int07 ) } > INT07 type = VECT_INIT
USART0TX : { * ( .int08 ) } > INT08 type = VECT_INIT
USART0RX : { * ( .int09 ) } > INT09 type = VECT_INIT
WDT : { * ( .int10 ) } > INT10 type = VECT_INIT
COMPARATORA : { * ( .int11 ) } > INT11 type = VECT_INIT
TIMERB1 : { * ( .int12 ) } > INT12 type = VECT_INIT
TIMERB0 : { * ( .int13 ) } > INT13 type = VECT_INIT
NMI : { * ( .int14 ) } > INT14 type = VECT_INIT
.reset : {} > RESET /* MSP430 Reset vector */
}
/****************************************************************************/
/* Include peripherals memory map */
/****************************************************************************/
-l msp430f169.cmd
4. msp430f169.cmd
/* ============================================================================ */
/* Copyright (c) 2020, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
/******************************************************************************/
/* msp430f169.cmd */
/* - Linker Command File for defintions in the header file */
/* Please do not change ! */
/* */
/******************************************************************************/
/* Version: 1.210 */
/******************************************************************************/
/************************************************************
* STANDARD BITS
************************************************************/
/************************************************************
* STATUS REGISTER BITS
************************************************************/
/************************************************************
* PERIPHERAL FILE MAP
************************************************************/
/************************************************************
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS
************************************************************/
IE1 = 0x0000;
IFG1 = 0x0002;
ME1 = 0x0004;
IE2 = 0x0001;
IFG2 = 0x0003;
ME2 = 0x0005;
/************************************************************
* WATCHDOG TIMER
************************************************************/
WDTCTL = 0x0120;
/************************************************************
* HARDWARE MULTIPLIER
************************************************************/
MPY = 0x0130;
MPYS = 0x0132;
MAC = 0x0134;
MACS = 0x0136;
OP2 = 0x0138;
RESLO = 0x013A;
RESHI = 0x013C;
SUMEXT = 0x013E;
/************************************************************
* DIGITAL I/O Port1/2
************************************************************/
P1IN = 0x0020;
P1OUT = 0x0021;
P1DIR = 0x0022;
P1IFG = 0x0023;
P1IES = 0x0024;
P1IE = 0x0025;
P1SEL = 0x0026;
P2IN = 0x0028;
P2OUT = 0x0029;
P2DIR = 0x002A;
P2IFG = 0x002B;
P2IES = 0x002C;
P2IE = 0x002D;
P2SEL = 0x002E;
/************************************************************
* DIGITAL I/O Port3/4
************************************************************/
P3IN = 0x0018;
P3OUT = 0x0019;
P3DIR = 0x001A;
P3SEL = 0x001B;
P4IN = 0x001C;
P4OUT = 0x001D;
P4DIR = 0x001E;
P4SEL = 0x001F;
/************************************************************
* DIGITAL I/O Port5/6
************************************************************/
P5IN = 0x0030;
P5OUT = 0x0031;
P5DIR = 0x0032;
P5SEL = 0x0033;
P6IN = 0x0034;
P6OUT = 0x0035;
P6DIR = 0x0036;
P6SEL = 0x0037;
/************************************************************
* USART
************************************************************/
/************************************************************
* USART 0
************************************************************/
U0CTL = 0x0070;
U0TCTL = 0x0071;
U0RCTL = 0x0072;
U0MCTL = 0x0073;
U0BR0 = 0x0074;
U0BR1 = 0x0075;
U0RXBUF = 0x0076;
U0TXBUF = 0x0077;
/************************************************************
* USART 1
************************************************************/
U1CTL = 0x0078;
U1TCTL = 0x0079;
U1RCTL = 0x007A;
U1MCTL = 0x007B;
U1BR0 = 0x007C;
U1BR1 = 0x007D;
U1RXBUF = 0x007E;
U1TXBUF = 0x007F;
/************************************************************
* USART0 I2C
************************************************************/
I2CIE = 0x0050;
I2CIFG = 0x0051;
I2CNDAT = 0x0052;
I2CTCTL = 0x0071;
I2CDCTL = 0x0072;
I2CPSC = 0x0073;
I2CSCLH = 0x0074;
I2CSCLL = 0x0075;
I2CDRB = 0x0076;
I2CDRW = 0x0076;
I2COA = 0x0118;
I2CSA = 0x011A;
I2CIV = 0x011C;
/************************************************************
* Timer A3
************************************************************/
TAIV = 0x012E;
TACTL = 0x0160;
TACCTL0 = 0x0162;
TACCTL1 = 0x0164;
TACCTL2 = 0x0166;
TAR = 0x0170;
TACCR0 = 0x0172;
TACCR1 = 0x0174;
TACCR2 = 0x0176;
/************************************************************
* Timer B7
************************************************************/
TBIV = 0x011E;
TBCTL = 0x0180;
TBCCTL0 = 0x0182;
TBCCTL1 = 0x0184;
TBCCTL2 = 0x0186;
TBCCTL3 = 0x0188;
TBCCTL4 = 0x018A;
TBCCTL5 = 0x018C;
TBCCTL6 = 0x018E;
TBR = 0x0190;
TBCCR0 = 0x0192;
TBCCR1 = 0x0194;
TBCCR2 = 0x0196;
TBCCR3 = 0x0198;
TBCCR4 = 0x019A;
TBCCR5 = 0x019C;
TBCCR6 = 0x019E;
/************************************************************
* Basic Clock Module
************************************************************/
DCOCTL = 0x0056;
BCSCTL1 = 0x0057;
BCSCTL2 = 0x0058;
/************************************************************
* Brown-Out, Supply Voltage Supervision (SVS)
************************************************************/
SVSCTL = 0x0055;
/*************************************************************
* Flash Memory
*************************************************************/
FCTL1 = 0x0128;
FCTL2 = 0x012A;
FCTL3 = 0x012C;
/************************************************************
* Comparator A
************************************************************/
CACTL1 = 0x0059;
CACTL2 = 0x005A;
CAPD = 0x005B;
/************************************************************
* ADC12
************************************************************/
ADC12CTL0 = 0x01A0;
ADC12CTL1 = 0x01A2;
ADC12IFG = 0x01A4;
ADC12IE = 0x01A6;
ADC12IV = 0x01A8;
ADC12MEM0 = 0x0140;
ADC12MEM1 = 0x0142;
ADC12MEM2 = 0x0144;
ADC12MEM3 = 0x0146;
ADC12MEM4 = 0x0148;
ADC12MEM5 = 0x014A;
ADC12MEM6 = 0x014C;
ADC12MEM7 = 0x014E;
ADC12MEM8 = 0x0150;
ADC12MEM9 = 0x0152;
ADC12MEM10 = 0x0154;
ADC12MEM11 = 0x0156;
ADC12MEM12 = 0x0158;
ADC12MEM13 = 0x015A;
ADC12MEM14 = 0x015C;
ADC12MEM15 = 0x015E;
ADC12MCTL0 = 0x0080;
ADC12MCTL1 = 0x0081;
ADC12MCTL2 = 0x0082;
ADC12MCTL3 = 0x0083;
ADC12MCTL4 = 0x0084;
ADC12MCTL5 = 0x0085;
ADC12MCTL6 = 0x0086;
ADC12MCTL7 = 0x0087;
ADC12MCTL8 = 0x0088;
ADC12MCTL9 = 0x0089;
ADC12MCTL10 = 0x008A;
ADC12MCTL11 = 0x008B;
ADC12MCTL12 = 0x008C;
ADC12MCTL13 = 0x008D;
ADC12MCTL14 = 0x008E;
ADC12MCTL15 = 0x008F;
/************************************************************
* DAC12
************************************************************/
DAC12_0CTL = 0x01C0;
DAC12_1CTL = 0x01C2;
DAC12_0DAT = 0x01C8;
DAC12_1DAT = 0x01CA;
/************************************************************
* DMA
************************************************************/
DMACTL0 = 0x0122;
DMACTL1 = 0x0124;
DMA0CTL = 0x01E0;
DMA1CTL = 0x01E8;
DMA2CTL = 0x01F0;
DMA0SA = 0x01E2;
DMA0DA = 0x01E4;
DMA0SZ = 0x01E6;
DMA1SA = 0x01EA;
DMA1DA = 0x01EC;
DMA1SZ = 0x01EE;
DMA2SA = 0x01F2;
DMA2DA = 0x01F4;
DMA2SZ = 0x01F6;
/************************************************************
* Interrupt Vectors (offset from 0xFFE0)
************************************************************/
/************************************************************
* End of Modules
************************************************************/
5. intrinsics.h
/*****************************************************************************/
/* INTRINSICS.H */
/* */
/* Copyright (c) 2005 Texas Instruments Incorporated */
/* http://www.ti.com/ */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in */
/* the documentation and/or other materials provided with the */
/* distribution. */
/* */
/* Neither the name of Texas Instruments Incorporated nor the names */
/* of its contributors may be used to endorse or promote products */
/* derived from this software without specific prior written */
/* permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS */
/* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT */
/* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR */
/* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT */
/* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, */
/* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, */
/* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY */
/* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT */
/* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE */
/* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* */
/*****************************************************************************/
#ifndef _INTRINSICS_H_
#define _INTRINSICS_H_
#ifdef __cplusplus
extern "C"
{
#endif /* __cplusplus */
/*---------------------------------------------------------------------------*/
/* Handle legacy conflicts */
/*---------------------------------------------------------------------------*/
#include "intrinsics_legacy_undefs.h"
/*---------------------------------------------------------------------------*/
/* General MSP Intrinsics */
/*---------------------------------------------------------------------------*/
void __no_operation(void);
unsigned short __bic_SR_register (unsigned short mask);
unsigned short __bic_SR_register_on_exit (unsigned short mask);
unsigned short __bis_SR_register (unsigned short mask);
unsigned short __bis_SR_register_on_exit (unsigned short mask);
unsigned short __get_SR_register (void);
unsigned short __get_SR_register_on_exit (void);
unsigned short __get_SP_register(void);
void __set_SP_register(unsigned short value);
void __delay_cycles(unsigned long cycles);
unsigned int __even_in_range(unsigned int val, unsigned int range);
void __op_code(unsigned short op);
/*---------------------------------------------------------------------------*/
/* General MSP Macros */
/*---------------------------------------------------------------------------*/
#define __never_executed() _never_executed()
/*---------------------------------------------------------------------------*/
/* MSP430/430X Intrinsics */
/*---------------------------------------------------------------------------*/
void __disable_interrupt(void);
void __enable_interrupt(void);
void __set_interrupt_state(unsigned short state);
unsigned short __get_R4_register(void);
void __set_R4_register(unsigned short value);
unsigned short __get_R5_register(void);
void __set_R5_register(unsigned short value);
unsigned short __bcd_add_short(unsigned short, unsigned short);
unsigned long __bcd_add_long(unsigned long, unsigned long);
unsigned short __swap_bytes(unsigned short a);
/*---------------------------------------------------------------------------*/
/* MSP430/430X Macros */
/*---------------------------------------------------------------------------*/
#define __get_interrupt_state() __get_SR_register()
#define __low_power_mode_0() __bis_SR_register(0x18)
#define __low_power_mode_1() __bis_SR_register(0x58)
#define __low_power_mode_2() __bis_SR_register(0x98)
#define __low_power_mode_3() __bis_SR_register(0xD8)
#define __low_power_mode_4() __bis_SR_register(0xF8)
#define __low_power_mode_off_on_exit() __bic_SR_register_on_exit(0xF0)
#if defined(__MSP430X__)
/*---------------------------------------------------------------------------*/
/* MSP430X Intrinsics */
/*---------------------------------------------------------------------------*/
void __data16_write_addr(unsigned short, unsigned long);
unsigned long __data16_read_addr(unsigned short);
void __data20_write_char(unsigned long, unsigned char);
void __data20_write_short(unsigned long, unsigned short);
void __data20_write_long(unsigned long, unsigned long);
unsigned char __data20_read_char(unsigned long);
unsigned short __data20_read_short(unsigned long);
unsigned long __data20_read_long(unsigned long);
#endif
/*---------------------------------------------------------------------------*/
/* Legacy Macros */
/*---------------------------------------------------------------------------*/
#define _nop() __no_operation()
#define _no_operation() __no_operation()
#define _enable_interrupt() __enable_interrupt()
#define _enable_interrupts() __enable_interrupt()
#define _disable_interrupt() __disable_interrupt()
#define _disable_interrupts() __disable_interrupt()
#define _set_interrupt_state(x) __set_interrupt_state(x)
#define _get_interrupt_state() __get_interrupt_state()
#define _delay_cycles(x) __delay_cycles(x)
#define _get_SP_register() __get_SP_register()
#define _set_SP_register(x) __set_SP_register(x)
#define _get_R4_register() __get_R4_register()
#define _set_R4_register(x) __set_R4_register(x)
#define _get_R5_register() __get_R5_register()
#define _set_R5_register(x) __set_R5_register(x)
#define _bic_SR_register(x) __bic_SR_register(x)
#define _bic_SR_register_on_exit(x) __bic_SR_register_on_exit(x)
#define _bis_SR_register(x) __bis_SR_register(x)
#define _bis_SR_register_on_exit(x) __bis_SR_register_on_exit(x)
#define _get_SR_register() __get_SR_register()
#define _get_SR_register_on_exit() __get_SR_register_on_exit()
#define _low_power_mode_0() __low_power_mode_0()
#define _low_power_mode_1() __low_power_mode_1()
#define _low_power_mode_2() __low_power_mode_2()
#define _low_power_mode_3() __low_power_mode_3()
#define _low_power_mode_4() __low_power_mode_4()
#define _low_power_mode_off_on_exit() __low_power_mode_off_on_exit()
#define _even_in_range(x,y) __even_in_range(x,y)
#define _op_code(x) __op_code(x)
#define _swap_bytes(x) __swap_bytes(x)
#define _data16_write_addr(x,y) __data16_write_addr(x,y)
#define _data16_read_addr(x) __data16_read_addr(x)
#define _data20_write_char(x,y) __data20_write_char(x,y)
#define _data20_read_char(x) __data20_read_char(x)
#define _data20_write_short(x,y) __data20_write_short(x,y)
#define _data20_read_short(x) __data20_read_short(x)
#define _data20_write_long(x,y) __data20_write_long(x,y)
#define _data20_read_long(x) __data20_read_long(x)
#define _bcd_add_short(x,y) __bcd_add_short(x,y)
#define _bcd_add_long(x,y) __bcd_add_long(x,y)
#ifdef __cplusplus
} /* extern "C" */
#endif /* __cplusplus */
#endif /* _INTRINSICS_H_ */
人就像是被蒙着眼推磨的驴子，生活就像一条鞭子；当鞭子抽到你背上时，你就只能一直往前走，虽然连你也不知道要走到什么时候为止，便一直这么坚持着。
