Salt-API安装配置及使用

Python3使用saltstack和salt-api

安装python3

    1. tar zxvf Python-3.5.1.tgz   
    2. cd  Python-3.5.1        
    3. ./configure
    4. make
    5. make install
    6. mv  /usr/bin/python /usr/bin/python2 # 如果是软连接，可以直接删除
    7. ln -s /usr/local/bin/python3.5 /usr/bin/python
    8. vim /usr/bin/yum   # 修改Yum,使yum依然有效，yum依靠老版本的python
    9. #!/usr/bin/python 修改为#!/usr/bin/python2
        
# 修改完/usr/bin/yum 依然还有问题，可以尝试修改/usr/libexec/urlgrabber-ext-down的文件python抬头

安装 salt-api

yum install salt-api -y

配置

生成自签名证书(用于ssl)

cd  /etc/pki/tls/certs
# 生成自签名证书, 过程中需要输入key密码及RDNs
make testcert
cd /etc/pki/tls/private/
# 解密key文件，生成无密码的key文件, 过程中需要输入key密码，该密码为之前生成证书时设置的密码
openssl rsa -in localhost.key -out localhost_nopass.key

创建用于salt-api的用户

useradd -M -s /sbin/nologin salt-api
echo "salt-api" | passwd salt-api —stdin

修改/etc/salt/master文件

sed -i '/#default_include/s/#default/default/g' /etc/salt/master  
mkdir /etc/salt/master.d

新增配置文件/etc/salt/master.d/api.conf

cat /etc/salt/master.d/api.conf
rest_cherrypy:
  port: 8000
  ssl_crt: /etc/pki/tls/certs/localhost.crt
  ssl_key: /etc/pki/tls/private/localhost_nopass.key

新增配置文件/etc/salt/master.d/eauth.conf

cat /etc/salt/master.d/eauth.conf  
external_auth:  
  pam:  
    salt-api:  
      - .*  
      - '@wheel'  
      - '@runner'

启动salt-master and salt-api

systemctl start salt-master
systemctl start salt-api

安装一个salt client

yum install salt-minion -y
修改配置
sed -i "/^#master: salt/c master: 192.168.104.76"  /etc/salt/minion
启动 client
systemctl start salt-minion

master 上接受key

[root@node76 salt]# salt-key -L
Accepted Keys:
Denied Keys:
Unaccepted Keys:
node76
Rejected Keys:
[root@node76 salt]# salt-key -A
The following keys are going to be accepted:
Unaccepted Keys:
node76
Proceed? [n/Y] Y
Key for minion node76 accepted.
[root@node76 salt]# salt-key -L
Accepted Keys:
node76
Denied Keys:
Unaccepted Keys:
Rejected Keys:

api使用

使用curl 获取token

 curl -k https://192.168.104.76:8000/login -H "Accept: application/x-yaml"  -d username='salt-api' -d password='salt-api'  -d eauth='pam'
return:
- eauth: pam
  expire: 1520269544.2591
  perms:
  - .*
  - '@wheel'
  - '@runner'
  start: 1520226344.259099
  token: 593a7224f988f28b84d58b7cda38fe5e5ea07d98
  user: salt-api

参数解释:

--sslv3 指定sslv3版本
-k      忽略证书获取https内容
-s      指定使用静默(silent)方式
-i      指定SaltAPI收到服务器返回的结果同时显示HTTP Header。
-H      指定一个特定的Header给远端服务器，当SaltAPI 需要发送appliton-tion/json Header时。会以我们希望的JSON格式返回结果
-d      想远端服务器发送POST请求，以key=value的格式发送 ，注意key=v时，必须紧挨=号两边

获取token后就可以使用token通信
注：重启salt-api后token改变

测试minion端的联通性

下面功能类似于“salt '*' test.ping”

curl -k https://192.168.104.76:8000 -H "Accept: application/x-yaml" -H "X-Auth-Token: ded897184a942ca75683276c29d787ea71c207a9" -d client='local' -d tgt='*' -d fun='test.ping' 
return:
- node76: true

参数解释：

client ： 模块，python处理salt-api的主要模块，‘client interfaces <netapi-clients>’
    local : 使用‘LocalClient <salt.client.LocalClient>’ 发送命令给受控主机，等价于saltstack命令行中的'salt'命令
    local_async : 和local不同之处在于，这个模块是用于异步操作的，即在master端执行命令后返回的是一个jobid，任务放在后台运行，通过产看jobid的结果来获取命令的执行结果。
    runner : 使用'RunnerClient<salt.runner.RunnerClient>' 调用salt-master上的runner模块，等价于saltstack命令行中的'salt-run'命令
    runner_async : 异步执行runner模块
    wheel : 使用'WheelClient<salt.wheel.WheelClient>', 调用salt-master上的wheel模块，wheel模块没有在命令行端等价的模块，但它通常管理主机资源，比如文件状态，pillar文件，salt配置文件，以及关键模块<salt.wheel.key>功能类似于命令行中的salt-key。
    wheel_async : 异步执行wheel模块
    备注：一般情况下local模块，需要tgt和arg(数组)，kwarg(字典)，因为这些值将被发送到minions并用于执行所请求的函数。而runner和wheel都是直接应用于master，不需要这些参数。
tgt : minions
fun : 函数
arg : 参数
expr_form : tgt的匹配规则
    'glob' - Bash glob completion - Default
    'pcre' - Perl style regular expression
    'list' - Python list of hosts
    'grain' - Match based on a grain comparison
    'grain_pcre' - Grain comparison with a regex
    'pillar' - Pillar data comparison
    'nodegroup' - Match on nodegroup
    'range' - Use a Range server for matching
    'compound' - Pass a compound match string

执行远程命令

下面功能类似于“salt '*' cmd.run ifconfig”

curl -k https://192.168.104.76:8000 -H "Accept: application/x-yaml" -H "X-Auth-Token: ded897184a942ca75683276c29d787ea71c207a9" -d client='local' -d tgt='*' -d fun='cmd.run'   -d arg='uptime'
return:
- node76: ' 13:18:46 up 161 days,  2:23,  1 user,  load average: 0.15, 0.09, 0.10'

使用state.sls

下面功能类似于“salt '*' state.sls ifconfig”

 curl -k https://192.168.104.76:8000 -H "Accept: application/x-yaml" -H "X-Auth-Token: ded897184a942ca75683276c29d787ea71c207a9" -d client='local' -d tgt='*' -d fun='state.sls' -d arg='ifconfig'
return:
- node76:
        cmd_|-ifconfig_|-ifconfig_|-run:  
      __run_num__: 0  
      changes:  
        pid: 30954  
        retcode: 0  
        stderr: ''  
        stdout: "eth2      Link encap:Ethernet  HWaddr 00:50:56:B5:5C:28  \n     \  
          \     inet addr:192.168.90.63  Bcast:192.168.90.255  Mask:255.255.255.0\n\  
          \          inet6 addr: fe80::250:56ff:feb5:5c28/64 Scope:Link\n        \  
          \  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1\n          RX packets:825051\  
          \ errors:0 dropped:0 overruns:0 frame:0\n          TX packets:434351 errors:0\  
          \ dropped:0 overruns:0 carrier:0\n          collisions:0 txqueuelen:1000\  
          \ \n          RX bytes:60353823 (57.5 MiB)  TX bytes:27062672 (25.8 MiB)\n\  
          \nlo        Link encap:Local Loopback  \n          inet addr:127.0.0.1 \  
          \ Mask:255.0.0.0\n          inet6 addr: ::1/128 Scope:Host\n          UP\  
          \ LOOPBACK RUNNING  MTU:16436  Metric:1\n          RX packets:808 errors:0\  
          \ dropped:0 overruns:0 frame:0\n          TX packets:808 errors:0 dropped:0\  
          \ overruns:0 carrier:0\n          collisions:0 txqueuelen:0 \n         \  
          \ RX bytes:59931 (58.5 KiB)  TX bytes:59931 (58.5 KiB)"  
      comment: Command "ifconfig" run  
      duration: 11.991  
      name: ifconfig  
      result: true  
      start_time: '13:59:06.334112'

使用Targeting

下面功能类似于"salt -L '192.168.90.61,192.168.90.63' test.ping"

 curl -k https://192.168.104.76:8000 -H "Accept: application/x-yaml" -H "X-Auth-Token: ded897184a942ca75683276c29d787ea71c207a9"  -d client='local' -d tgt='node76'  -d expr_form='list'  -d fun='test.ping' 
return:
- node76: true

以json格式输出

curl -k https://192.168.104.76:8000 -H "Accept: application/json" -H "X-Auth-Token: ded897184a942ca75683276c29d787ea71c207a9"  -d client='local' -d tgt='node76'  -d fun='cmd.run' -d arg='uptime'
{"return": [{"node76": " 13:25:20 up 161 days,  2:30,  1 user,  load average: 0.01, 0.06, 0.08"}]}

使用jobs

 curl -k -s https://192.168.104.76:8000/jobs/20180306112645047796 -H "Accept: application/x-yaml" -H "X-Auth-Token: a7f8b2fab2bfb05334f8a314d97925c1bec1d14c" 
info:
- Arguments:
  - uptime
  Function: cmd.run
  Minions:
  - node76
  Result:
    node76:
      return: ' 11:26:45 up 162 days, 31 min,  1 user,  load average: 0.12, 0.07,
        0.08'
  StartTime: 2018, Mar 06 11:26:45.047796
  Target: node76
  Target-type: glob
  User: salt-api
  jid: '20180306112645047796'
return:
- node76: ' 11:26:45 up 162 days, 31 min,  1 user,  load average: 0.12, 0.07, 0.08'
#结果
curl -k -s https://192.168.104.76:8000/jobs/20180306112645047796 -H "Accept: application/x-yaml" -H "X-Auth-Token: a7f8b2fab2bfb05334f8a314d97925c1bec1d14c" 
info:
- Arguments:
  - uptime
  Function: cmd.run
  Minions:
  - node76
  Result:
    node76:
      return: ' 11:26:45 up 162 days, 31 min,  1 user,  load average: 0.12, 0.07,
        0.08'
  StartTime: 2018, Mar 06 11:26:45.047796
  Target: node76
  Target-type: glob
  User: salt-api
  jid: '20180306112645047796'
return:
- node76: ' 11:26:45 up 162 days, 31 min,  1 user,  load average: 0.12, 0.07, 0.08'

posted @ 2018-03-05 13:46 程序员同行者阅读(371) 评论(0) 编辑收藏举报

刷新页面返回顶部

Salt-API安装配置及使用

Python3使用saltstack和salt-api

安装python3

安装 salt-api

配置

生成自签名证书(用于ssl)

创建用于salt-api的用户

修改/etc/salt/master文件

新增配置文件/etc/salt/master.d/api.conf

新增配置文件/etc/salt/master.d/eauth.conf

启动salt-master and salt-api

安装一个salt client

master 上接受key

api使用

使用curl 获取token

参数解释:

测试minion端的联通性

参数解释：

执行远程命令

使用state.sls

使用Targeting

以json格式输出

使用jobs

公告