vim配置

 

1. 安装必要的软件

sudo apt-get install ctags cscope python-dev build-essential 

2. 升级vim到7.4

方法一：手动编译

(1) 卸载原有的Vim

sudo apt-get remove vim vim-tiny vim-common vim-runtime gvim vim-gui-common

(2)编译安装vim74

hg clone https://vim.googlecode.com/hg/ vim

cd vim
./configure --with-features=huge \
            --enable-rubyinterp=yes \
            --enable-pythoninterp=yes \
            --enable-python3interp=yes \
            --enable-perlinterp=yes \
            --enable-luainterp=yes \
            --enable-gui=gtk2 --enable-cscope --prefix=/usr
make VIMRUNTIMEDIR=/usr/share/vim/vim74
make install

方法二： 手动添加PPA(Personal Package Archives)

sudo add-apt-repository ppa:nmi/vim-snapshots
sudo apt-get update
sudo apt-get install vim

3. 安装vim管理插件 pathogen

参见 http://www.cnblogs.com/gtarcoder/p/4632325.html

4. 安装vim插件 nerdtree, nerdtree-tabs, powerline, conslas-powerline-vim, vim-colors-solarized

cd ~/.vim/bundle

git clone http://github.com/scrooloose/nerdtree.git   #安装nerdtree

git clone https://github.com/jistr/vim-nerdtree-tabs.git #安装nerdtree-tabs

git clone https://github.com/eugeii/consolas-powerline-vim.git #安装powerline

git clone git://github.com/altercation/vim-colors-solarized.git #安装vim-colors-solarized

5. 安装自动补全 youcompleteme

(1) 下载youcompleteme

git clone https://github.com/Valloric/YouCompleteMe.git
git submodule update --init --recursive

(2) 编译安装youcompleteme

cd ~/.vim/bundle/YouCompleteMe
./install --clang-completer #对c/c++语言进行支持

正常来说,YCM会去下载clang的包，如果已经有，也可以用系统--system-libclang。

步骤（2）是使用脚本进行自动编译安装ycm对c语言的支持，也可以下载clang的源码，编译，如下所示

$: cd ~  
$: mkdir ycm_build  
$: cd ycm_build  
$: cmake -G "Unix Makefiles" . ~/.vim/bundle/YouCompleteMe/cpp  
$: cmake -G "Unix Makefiles" -DPATH_TO_LLVM_ROOT=/usr/clang_3_3/ . ~/.vim/bundle/YouCompleteMe/third_party_ycmd/cpp
$: make ycm_core  
$: cp /usr/clang_3_3/lib/libclang.so ~/.vim/bundle/YouCompleteMe/python/libclang.so #这一步是为了使用新的libcang.so  
      
$: cd ~/.vim/bundle/YouCompleteMe  
    .vim/bunble/YouCompleteMe$: ./install.sh --clang-completer  

（3）修改配置文件 ~/.vim/bundle/YouCompleteMe/third_party/ycmd/cpp/ycm/.ycm_extra_conf.py

# This file is NOT licensed under the GPLv3, which is the license for the rest
# of YouCompleteMe.
#
# Here's the license text for this file:
#
# This is free and unencumbered software released into the public domain.
#
# Anyone is free to copy, modify, publish, use, compile, sell, or
# distribute this software, either in source code form or as a compiled
# binary, for any purpose, commercial or non-commercial, and by any
# means.
#
# In jurisdictions that recognize copyright laws, the author or authors
# of this software dedicate any and all copyright interest in the
# software to the public domain. We make this dedication for the benefit
# of the public at large and to the detriment of our heirs and
# successors. We intend this dedication to be an overt act of
# relinquishment in perpetuity of all present and future rights to this
# software under copyright law.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
# IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
# OTHER DEALINGS IN THE SOFTWARE.
#
# For more information, please refer to <http://unlicense.org/>

import os
import ycm_core

# These are the compilation flags that will be used in case there's no
# compilation database set (by default, one is not set).
# CHANGE THIS LIST OF FLAGS. YES, THIS IS THE DROID YOU HAVE BEEN LOOKING FOR.
flags = [
'-Wall',
'-Wextra',
#'-Werror',
#'-Wc++98-compat',
'-Wno-long-long',
'-Wno-variadic-macros',
'-fexceptions',
'-stdlib=libc++',
# THIS IS IMPORTANT! Without a "-std=<something>" flag, clang won't know which
# language to use when compiling headers. So it will guess. Badly. So C++
# headers will be compiled as C headers. You don't want that so ALWAYS specify
# a "-std=<something>".
# For a C project, you would set this to something like 'c99' instead of
# 'c++11'.
'-std=c++11',
# ...and the same thing goes for the magic -x option which specifies the
# language that the files to be compiled are written in. This is mostly
# relevant for c++ headers.
# For a C project, you would set this to 'c' instead of 'c++'.
'-x',
'c++',
'-I',
'.',
'-isystem',
'/usr/include',
'-isystem',
'/usr/local/include',
'-isystem',
'/Library/Developer/CommandLineTools/usr/include',
'-isystem',
'/Library/Developer/CommandLineTools/usr/bin/../lib/c++/v1',
]

# Set this to the absolute path to the folder (NOT the file!) containing the
# compile_commands.json file to use that instead of 'flags'. See here for
# more details: http://clang.llvm.org/docs/JSONCompilationDatabase.html
#
# Most projects will NOT need to set this to anything; you can just change the
# 'flags' list of compilation flags. Notice that YCM itself uses that approach.
compilation_database_folder = ''

if os.path.exists( compilation_database_folder ):
  database = ycm_core.CompilationDatabase( compilation_database_folder )
else:
  database = None

SOURCE_EXTENSIONS = [ '.cpp', '.cxx', '.cc', '.c', '.m', '.mm' ]

def DirectoryOfThisScript():
  return os.path.dirname( os.path.abspath( __file__ ) )

def MakeRelativePathsInFlagsAbsolute( flags, working_directory ):
  if not working_directory:
    return list( flags )
  new_flags = []
  make_next_absolute = False
  path_flags = [ '-isystem', '-I', '-iquote', '--sysroot=' ]
  for flag in flags:
    new_flag = flag

    if make_next_absolute:
      make_next_absolute = False
      if not flag.startswith( '/' ):
        new_flag = os.path.join( working_directory, flag )

    for path_flag in path_flags:
      if flag == path_flag:
        make_next_absolute = True
        break

      if flag.startswith( path_flag ):
        path = flag[ len( path_flag ): ]
        new_flag = path_flag + os.path.join( working_directory, path )
        break

    if new_flag:
      new_flags.append( new_flag )
  return new_flags

def IsHeaderFile( filename ):
  extension = os.path.splitext( filename )[ 1 ]
  return extension in [ '.h', '.hxx', '.hpp', '.hh' ]

def GetCompilationInfoForFile( filename ):
  # The compilation_commands.json file generated by CMake does not have entries
  # for header files. So we do our best by asking the db for flags for a
  # corresponding source file, if any. If one exists, the flags for that file
  # should be good enough.
  if IsHeaderFile( filename ):
    basename = os.path.splitext( filename )[ 0 ]
    for extension in SOURCE_EXTENSIONS:
      replacement_file = basename + extension
      if os.path.exists( replacement_file ):
        compilation_info = database.GetCompilationInfoForFile(
          replacement_file )
        if compilation_info.compiler_flags_:
          return compilation_info
    return None
  return database.GetCompilationInfoForFile( filename )

def FlagsForFile( filename, **kwargs ):
  if database:
    # Bear in mind that compilation_info.compiler_flags_ does NOT return a
    # python list, but a "list-like" StringVec object
    compilation_info = GetCompilationInfoForFile( filename )
    if not compilation_info:
      return None

    final_flags = MakeRelativePathsInFlagsAbsolute(
      compilation_info.compiler_flags_,
      compilation_info.compiler_working_dir_ )

    # NOTE: This is just for YouCompleteMe; it's highly likely that your project
    # does NOT need to remove the stdlib flag. DO NOT USE THIS IN YOUR
    # ycm_extra_conf IF YOU'RE NOT 100% SURE YOU NEED IT.
    #try:
    #  final_flags.remove( '-stdlib=libc++' )
    #except ValueError:
    #  pass
  else:
    relative_to = DirectoryOfThisScript()
    final_flags = MakeRelativePathsInFlagsAbsolute( flags, relative_to )

  return {
    'flags': final_flags,
    'do_cache': True
  }

5. 修改配置文件 ~/.vimrc

"---------------------------------- pathogen 设置-------------------------
"pathogen插件用于管理其他vim插件，安装其他插件时候，可以直接解压覆盖到 .vim 目录下的 autoload, plugin， doc目录；
"也可以安装完pathogen之后（会在autoload目录下有一个pathogen.vim，同时在.vim 下创建 bundles目录）进入 bundles目录，
"执行 git clone xxxx 到bundles目录，利用 pathogen进行安装
execute pathogen#infect()
execute pathogen#helptags()



"定义快捷键的前缀，前缀类似于命令空间，避免多个相同的快捷键冲突
"如 c, <header> c, <header><header> c 是三个不同的快捷键
let mapleader=";"

"----------------------------------基本配置------------------------------
"关闭兼容模式
set nocompatible

"文件类型检测，可以针对不同类型的文件加载不同的插件
filetype on
"根据侦测的文件类型，加载相应的插件
filetype plugin on

"vim 自身命令行 模式自动补全
set wildmenu

"设置语法高亮
if has("syntax")
    syntax on
endif 


"高亮光标所在的行
set cul 

"用浅色高亮当前行
autocmd InsertEnter * se cul

"设置行间隔
set linespace=0

"设置退格键可用
set backspace=2

"设置匹配模式，显示匹配的括号
set showmatch

"整词换行
set linebreak

"设置光标可以从行首或行末换到另一行去
set whichwrap=b,s,<,>,[,] 

"设置使用鼠标
set mouse=a
"set mouse=

"显示行号
set number

"标志预览窗口
set previewwindow

"设置历史记录条数
set history=50

"设置自动写回文件
"自动把内容写回文件: 如文件被修改过，在每个 :next、:rewind、:last、:first、:previous、:stop、:suspend、:tag、:!、:make、CTRL-]
" 和 CTRL-^命令时进行；用 :buffer、CTRL-O、CTRL-I、'{A-Z0-9} 或 `{A-Z0-9}  命令转到别的文件时亦然。
set autowrite

"记住上次打开文件的位置，重新打开时自动跳转到上次编辑的位置
set viminfo='10,\"100,:20,%,n~/.viminfo
au BufReadPost * if line("'\"") > 0|if line("'\"") <= line("$")|exe("norm '\"")|else|exe "norm $"|endif|endif

"---------------------------------配色方案------------------------------
syntax enable

syntax on

"设置背景色
set background=dark

"vim 配色方案
"colorscheme solarized
colorscheme desert

set t_Co=256

"设置字体
set guifont=Consolas:h11


"---------------------------------设置宽度（tab等）----
"设置tab宽度
set tabstop=4

"设置软tab宽度，软tab，用空格代替tab
set softtabstop=4

"自动缩进的宽度
set shiftwidth=4

"----------------------------------设置对齐和缩进--------
"设置自动对齐，（和上一行）
"set autoindent

"智能对齐
set smartindent

"使用c/c++语言的自动缩进方式
set cindent

"设置c/c++语言的具体缩进方式
set cinoptions={0,1s,t0,n-2,p2s,(03s,=.5s,>1s,=1s,:1s 

"不要用空格代替制表符
set expandtab

"在行和段开始处使用制表符
set smarttab

"-----------------------------------文件生成----------------------
"去掉输入错误的提示声音
set noeb 

"在处理未保存或只读文件的时候，弹出确认
set confirm

"禁止生成临时文件
set nobackup
set noswapfile


"------------------------------------状态行设置-----------------
"0 不显示状态行，1 当多于一个窗口时显示最后一个窗口的状态行，2 总是显示最后一个窗口的状态行
set laststatus=2 
"显示标尺，用于显示光标位置处的行号和列号。每个窗口都有自己的标尺，如果窗口有状态行，则显示在状态行，否则显示在最后一行
set ruler 

"命令行设置
"命令行显示输入的命令
set showcmd
"命令行显示当前vim的模式
set showmode

"--------------------------------------查找设置--------------------------------
"输入字符串就显示匹配点
set incsearch
"高亮显示查找结果
set hlsearch

"开启实时搜索功能
set incsearch

"搜索时大小写不敏感
set ignorecase

"--------------------------------------多窗口设置------------------------------
"打开一个新的标签页，然后ctags查找并在新的标签页面中显示当前光标处的变量或函数
nmap <C-\> :tab split<CR>:exec("tag ".expand("<cword>"))<CR>
autocmd filetype go nmap <C-\> :tab split<CR>:exec("GoDef ".expand("<cword>")) 
"nmap <F3> :vsp<CR>:exec("tag ".expand("<cword>"))<CR>
nmap <S-Left> :tabprevious<CR>
nmap <S-Right> :tabnext<CR>


"快捷键依次遍历子窗口
nnoremap nw <C-W><C-W>

"跳转至右方的窗口
nnoremap <Leader>l <C-W>l

"跳转至左方的窗口
nnoremap <Leader>j <C-W>h

"跳转至上方的窗口
nnoremap <Leader>i <C-W>k

"跳转至下方的窗口
nnoremap <Leader>k <C-W>j


"-------------------------------------设置多终端之间的拷贝-------------------
"visual 模式下，xw 复制选中的区域， 到另一个终端下，xr粘贴
if has("unix")
   nmap xr :r $HOME/.vimxfer<CR>
   nmap xw :'a,.w! $HOME/.vimxfer<CR>
   vmap xr c<esc>:r $HOME/.vimxfer<CR>
   vmap xw :w! $HOME/.vimxfer<CR>
else
   nmap xr :r c:/.vimxfer<CR>
   nmap xw :'a,.w! c:/.vimxfer<CR>
   vmap xr c<esc>:r c:/.vimxfer<cr>
   vmap xw :w! c:/.vimxfer<CR>
endif




"-------------------------------------ctags设置----------------------------
"按下F2重新生成tag文件，并更新taglist
map <F2> :!ctags -R --c++-kinds=+p --fields=+iaS --extra=+q .<CR><CR>:TlistUpdate<CR>
imap <F2> <ESC>:!ctags -R --c++-kinds=+p --fields=+iaS --extra=+q .<CR><CR>:TlistUpdate<CR>
set tags=tags
set tags+=./tags "add current directory's generated tags file
set tags+=/usr/include/c++/tags


"---------------------------------------taglist 设置 -----------------------
"因为我们放在环境变量里，所以可以直接执行
let Tlist_Ctags_Cmd='ctags'

"让窗口显示在右边，0的话就是显示在左边
let Tlist_Use_Right_Window=1

"让taglist可以同时展示多个文件的函数列表
let Tlist_Show_One_File=1

"非当前文件，函数列表折叠隐藏
let Tlist_File_Fold_Auto_Close=1 

"当taglist是最后一个分割窗口时，自动退出vim
let Tlist_Exit_OnlyWindow=1 

"是否一直处理tags.1:处理;0:不处理
let Tlist_Process_File_Always=1 

"实时更新tags
let Tlist_Inc_Winwidth=0





"---------------------------------------- cscope 设置---------------------------------
"if has("cscope")
"    set csprg=/usr/bin/cscope " 指定用来执行cscope的命令
"    set csto=0 " 设置cstag命令查找次序：0先找cscope数据库再找标签文件；1先找标签文件再找cscope数据库
"    set cst " 同时搜索cscope数据库和标签文件
"    set cscopequickfix=s-,c-,d-,i-,t-,e- " 使用QuickFix窗口来显示cscope查找结果
"    set nocsverb
"    if filereadable("cscope.out") " 若当前目录下存在cscope数据库，添加该数据库到vim
"        cs add cscope.out
"    elseif $CSCOPE_DB != "" " 否则只要环境变量CSCOPE_DB不为空，则添加其指定的数据库到vim
"        cs add $CSCOPE_DB
"    endif
"    set csverb
"endif

"map <F4> :cs add ./cscope.out .<CR><CR><CR> :cs reset<CR>
"imap <F4> <ESC>:cs add ./cscope.out .<CR><CR><CR> :cs reset<CR>
" 将:cs find
" c等Cscope查找命令映射为<C-_>c等快捷键（按法是先按Ctrl+Shift+-,然后很快再按下c）
"nmap <C-_>s :cs find s <C-R>=expand("<cword>")<CR><CR>:copen<CR><CR>
"nmap <C-_>g :cs find g <C-R>=expand("<cword>")<CR><CR>
"nmap <C-_>d :cs find d <C-R>=expand("<cword>")<CR><CR>:copen<CR><CR>
"nmap <C-_>c :cs find c <C-R>=expand("<cword>")<CR><CR>:copen<CR><CR>
"nmap <C-_>t :cs find t <C-R>=expand("<cword>")<CR><CR>:copen<CR><CR>
"nmap <C-_>e :cs find e <C-R>=expand("<cword>")<CR><CR>:copen<CR><CR>
"nmap <C-_>f :cs find f <C-R>=expand("<cfile>")<CR><CR>
"nmap <C-_>i :cs find i <C-R>=expand("<cfile>")<CR><CR>:copen<CR><CR>

"--------------------------------------cscope 设置 2 --------------------------
function! InitCsTag()
    execute "!ctags -R --languages=C++ --c++-kinds=+p --fields=+iaS --extra=+q ./"
    if(executable("cscope") && has("cscope") )
        if(has('win32'))
            silent! execute "!dir /b *.c,*.cpp,*.h,*.java,*.cs >> cscope.files"
        else
            silent! execute "!find . -name '*.h' -o -name '*.c' -o -name '*.cpp' -o -name '*.inl' -o -name '*.m' -o -name '*.mm' -o -name '*.java' -o -name '*.py' -o -name '*.html' -o -name '*.php' -o -name '*.js' > cscope.files"
        endif
        silent! execute "!cscope -b"
        silent! execute "cs kill -1"
        if filereadable("cscope.out")
            execute "cs add cscope.out"
        endif
    endif
    echohl StatusLine | echo "C/C++ cscope tag updated" | echohl None
endf

function! UpdateCsTag()
    silent! execute "!cscope -b"
    silent! execute "cs reset"
endf
    
if has("cscope")
    set cscopequickfix=s-,c-,d-,i-,t-,e-
    set csto=0
    set cst
    set csverb
endif

"nnoremap <F11> :call UpdateCsTag()
nnoremap <F9> :call InitCsTag()<CR><CR><CR><CR>
nmap <F10> :cs find s <C-R>=expand("<cword>")<CR><CR>
nmap <Leader><F10> :cs find s <C-R>=expand("<cword>")<CR><CR>:copen<CR>
nmap <F11> :cp<cr>
nmap <F12> :cn<cr>



"--------------------------------------------------nerdtree 设置-------------------------------------

let NERDChristmasTree=1
let NERDTreeAutoCenter=1
let NERDTreeBookmarksFile=$VIM.'/Data/NerdBookmarks.txt'
let NERDTreeMouseMode=2
let NERDTreeShowBookmarks=1
let NERDTreeShowFiles=1
let NERDTreeShowHidden=1
let NERDTreeShowLineNumbers=1
let NERDTreeWinPos='left'
let NERDTreeWinSize=31

"autocmd VimEnter * NERDTreeTabs

"当打开vim且没有文件时自动打开NERDTree
autocmd vimenter * if !argc() | NERDTree | endif
" 只剩 NERDTree时自动关闭
autocmd bufenter * if (winnr("$") == 1 && exists("b:NERDTreeType") && b:NERDTreeType == "primary") | q | endif

"map <F3> :NERDTreeMirror<CR>
"map <F3> :NERDTreeToggle<CR>
map <F3> :NERDTreeTabsToggle<CR>

"----------------------------------------------------powerline 设置-----------------------------------
set guifont=PowerlineSymbols\ for\ Powerline
set t_Co=256
let g:Powerline_symbols = 'fancy'

"防止出现乱码
let Powerline_symbols = 'compatible'
set encoding=utf8

"----------------------------------------------------代码折叠设置-------------------------------
" 用语法高亮来定义折叠
set foldmethod=syntax 

" 启动vim时不要自动折叠代码
set foldlevel=100 

" 设置折叠栏宽度
set foldcolumn=5 


"----------------------------------------------------quickfix设置-------------------------
" 按下F8，执行make clean
map <F8> :make clean<CR><CR><CR>

" 按下F7，执行make编译程序，并打开quickfix窗口，显示编译信息
 map <F7> :make<CR><CR><CR> :copen<CR><CR>

" 按下F5，光标移到上一个错误所在的行
 map <F5> :cp<CR>
 
" 按下F6，光标移到下一个错误所在的行
 map <F6> :cn<CR>

"以下的映射是使上面的快捷键在插入模式下也能用
imap <F8> <ESC>:make clean<CR><CR><CR>
imap <F7> <ESC>:make<CR><CR><CR> :copen<CR><CR>
imap <F5> <ESC>:cp<CR>
imap <F6> <ESC>:cn<CR>



"----------------------------------syntastic settings----------------------
let g:syntastic_check_on_open = 1  
let g:syntastic_cpp_include_dirs = ['/usr/include/']  
let g:syntastic_cpp_remove_include_errors = 1  
let g:syntastic_cpp_check_header = 1  
let g:syntastic_cpp_compiler = 'clang++'  
"set error or warning signs  
"let g:syntastic_error_symbol = 'x'  
"let g:syntastic_warning_symbol = '!'  
""whether to show balloons  
let g:syntastic_enable_balloons = 1  
  
"----------------------------------YCM settings------------------------------
let g:ycm_global_ycm_extra_conf = '~/.vim/bundle/YouCompleteMe/third_party/ycmd/cpp/ycm/.ycm_extra_conf.py'  
let g:ycm_collect_identifiers_from_tags_files = 1  
let g:ycm_seed_identifiers_with_syntax = 1  
let g:ycm_confirm_extra_conf = 0  

let g:ycm_error_symbol = '>>'
let g:ycm_warning_symbol = '>*'
nnoremap <leader>gl :YcmCompleter GoToDeclaration<CR>
nnoremap <leader>gf :YcmCompleter GoToDefinition<CR>
nnoremap <leader>gg :YcmCompleter GoToDefinitionElseDeclaration<CR>
"nmap <F4> :YcmDiags<CR>


"----------------------------------------------------快捷键设置---------------------------
"<F1>  gnome 终端手册
"更新ctags文件
"map <F2> :!ctags -R --c++-kinds=+p --fields=+iaS --extra=+q .<CR><CR>:TlistUpdate<CR>
"更新cscope文件
"nnoremap <F12> :call InitCsTag()
"显示或关闭nerdtree
"map <F3> :NERDTreeTabsToggle<CR>
"
"按下F5，光标移到上一个错误所在的行
"map <F5> :cp<CR>
 
"按下F6，光标移到下一个错误所在的行
"map <F6> :cn<CR>

"按下F7，执行make编译程序，并打开quickfix窗口，显示编译信息
"map <F7> :make<CR><CR><CR> :copen<CR><CR>
"
"按下F8，执行make clean
"map <F8> :make clean<CR><CR><CR>

"
"生成cscope数据库
"nnoremap <F9> :call InitCsTag()
"cscope 查找，在当前标签页面显示
"nmap <F10> :cs find s 
"cscope 查找，在新标签页面显示可能的结果
"nmap <Leader><F10> :cs find s <C-R>=expand("<cword>")<CR><CR>:copen<CR>
"cscope前一个查找结果
"nmap <F11> :cp<cr>
"cscope后一个查找结果
"nmap <F12> :cn<cr>
"
"前一个tab页面
"nmap <S-L> :tabprevious<CR>
"后一个tab页面
"nmap <S-R> :tabnext<CR>

"快捷键依次遍历子窗口
"nnoremap nw <C-W><C-W>

"跳转至右方的窗口
"nnoremap <Leader>l <C-W>l

"跳转至左方的窗口
"nnoremap <Leader>j <C-W>h

"跳转至上方的窗口
"nnoremap <Leader>i <C-W>k

"跳转至下方的窗口
"nnoremap <Leader>k <C-W>j


"------------------------------------------
"在ubuntu下需要安装vim-gnome来支持系统剪贴板
"
"将文本块复制到系统剪贴板
vnoremap <Leader>y "+y

"系统粘贴板内容粘贴至vim
nmap <Leader>p "+p
"-----------------------------------------