MySQL的多层SP中Cursor的m_max_cursor_index相关BUG分析
源码分析丨MySQL的多层SP中Cursor相关BUG
一、问题发现
在一次开发中在sp中使用多层cursor的时候想知道每层的m_max_cursor_index
值分别是多少,以用来做后续开发。于是做了以下的试验,但是发现第一个level=2那层的m_max_cursor_index
的值有点问题。
注:本次使用的MySQL数据库版本为最新的debug版本。
SQL语句示例:
greatsql> CREATE TABLE t1 (a INT, b VARCHAR(10)); 以下注释里面是该层sp_pcontext的参数值。 DELIMITER $$ CREATE PROCEDURE processnames() -- level=0,m_max_cursor_index=1+8+1 BEGIN DECLARE nameCursor0 CURSOR FOR SELECT * FROM t1; -- level=1,m_cursor_offset=0,m_max_cursor_index=1+8+1 begin DECLARE nameCursor1 CURSOR FOR SELECT * FROM t1; -- level=2,m_cursor_offset=1,m_max_cursor_index=1+8 ☆问题点 begin DECLARE nameCursor2 CURSOR FOR SELECT * FROM t1; -- level=3,m_cursor_offset=2,m_max_cursor_index=1 DECLARE nameCursor3 CURSOR FOR SELECT * FROM t1; -- level=3,m_cursor_offset=2,m_max_cursor_index=2 DECLARE nameCursor4 CURSOR FOR SELECT * FROM t1; -- level=3,m_cursor_offset=2,m_max_cursor_index=3 DECLARE nameCursor5 CURSOR FOR SELECT * FROM t1; -- level=3,m_cursor_offset=2,m_max_cursor_index=4 end; end; begin DECLARE nameCursor6 CURSOR FOR SELECT * FROM t1; -- level=2,m_cursor_offset=1,m_max_cursor_index=1 end; END $$ DELIMITER ;
首先查看上面的sp的code,可以发现nameCursor6
和nameCursor1
属于同一层,因此他们的offset值一样。
greatsql> show procedure code processnames; +-----+---------------------------------------+ | Pos | Instruction | +-----+---------------------------------------+ | 0 | cpush nameCursor0@0: SELECT * FROM t1 | | 1 | cpush nameCursor1@1: SELECT * FROM t1 | | 2 | cpush nameCursor2@2: SELECT * FROM t1 | | 3 | cpush nameCursor3@3: SELECT * FROM t1 | | 4 | cpush nameCursor4@4: SELECT * FROM t1 | | 5 | cpush nameCursor5@5: SELECT * FROM t1 | | 6 | cpop 4 | | 7 | cpop 1 | | 8 | cpush nameCursor6@1: SELECT * FROM t1 | | 9 | cpop 1 | | 10 | cpop 1 | +-----+---------------------------------------+ 11 rows in set (6.02 sec)
然后通过debug查看每层sp_pcontext的参数值(相关参数值已经在上面标识出),发现第一个level=2的sp_pcontext的m_max_cursor_index
值多了很多,预期值应该是4+1,但是实际是8+1,而上面的层都没错,这说明代码最里面那层m_max_cursor_index
赋值错了。
二、问题调查过程
1、发现了问题点就看看代码里面对于每层的m_max_cursor_index
是怎么赋值的。
1、初始化sp_pcontext的时候所有的参数都为0 sp_pcontext::sp_pcontext(THD *thd) : m_level(0), m_max_var_index(0), m_max_cursor_index(0)...{init(0, 0, 0, 0);} 2、每加一层sp_pcontext,当前的m_cursor_offset=上一层cursor个数 sp_pcontext::sp_pcontext(THD *thd, sp_pcontext *prev, sp_pcontext::enum_scope scope) : m_level(prev->m_level + 1), m_max_var_index(0), m_max_cursor_index(0)... {init(prev->current_cursor_count());} void sp_pcontext::init(uint cursor_offset) {m_cursor_offset = cursor_offset;} uint current_cursor_count() const { return m_cursor_offset + static_cast<uint>(m_cursors.size()); } 3、退出当前sp_pcontext层,需要把当前的max_cursor_index()信息值赋值给上一层的m_max_cursor_index,即当前的cursor数量累加给上一层 sp_pcontext *sp_pcontext::pop_context() { uint submax = max_cursor_index(); if (submax > m_parent->m_max_cursor_index) m_parent->m_max_cursor_index = submax; } uint max_cursor_index() const { return m_max_cursor_index + static_cast<uint>(m_cursors.size()); } 4、每次增加一个cursor,m_max_cursor_index值递增,m_max_cursor_index是计数器。 bool sp_pcontext::add_cursor(LEX_STRING name) { if (m_cursors.size() == m_max_cursor_index) ++m_max_cursor_index; return m_cursors.push_back(name); }
2、根据第一步的分析,只在最里面那层的m_max_cursor_index
累加出来计算错误,看看上面的累加过程,是用max_cursor_index()
值来累加的,于是查看max_cursor_index()
函数的实现:
uint max_cursor_index() const { return m_max_cursor_index + static_cast<uint>(m_cursors.size()); }
这里是把当前层的m_max_cursor_index
值加上m_cursors.size()
,但是在函数add_cursor
里面,m_cursors
数组每增加一个cursor
,m_max_cursor_index
都要加1,也就是说在最里面那层sp_pcontext
的计算重复了,计算了2遍m_cursors.size()
,导致上面的level=2那层的m_max_cursor_index
值变成2*4=8了。到这里问题点发现。
三、问题解决方案
通过以上代码解析后,可以考虑只对最里面那层sp_pcontext
的max_cursor_index()
取值进行修改,最里面那层的sp_pcontext
没有m_children
,因此可以用这个数组值进行判断。代码作如下修改:
uint max_cursor_index() const { if(m_children.size() == 0) -- 最里面那层sp_pcontext直接返回m_max_cursor_index的值。 return m_max_cursor_index; -- 可以改为static_cast<uint>(m_cursors.size()),二者值一样。 else -- 上层sp_pcontext返回下层所有sp_pcontext的m_max_cursor_index的值,再加上当前层的m_cursors.size()值。 return m_max_cursor_index + static_cast<uint>(m_cursors.size()); }
四、问题总结
在MySQL的sp里面使用cursor的话,因为m_max_cursor_index
只用于统计,不用于实际赋值和计算过程,因此不影响使用。但是如果要用这个值用于二次开发,就要注意到这个问题。上面的修改方案只是其中一个解决方案,也可以根据自己的需要去改add_cursor的m_max_cursor_index
的赋值过程。
这次发现的问题属于不参与计算的bug,但却影响开源代码的后续开发,在实际开发应用中类似的问题也要注意,一不小心就会踩坑。
Enjoy GreatSQL 😃
关于 GreatSQL
GreatSQL是适用于金融级应用的国内自主开源数据库,具备高性能、高可靠、高易用性、高安全等多个核心特性,可以作为MySQL或Percona Server的可选替换,用于线上生产环境,且完全免费并兼容MySQL或Percona Server。
相关链接: GreatSQL社区 Gitee GitHub Bilibili
GreatSQL社区:
社区博客有奖征稿详情:https://greatsql.cn/thread-100-1-1.html
技术交流群:
微信:扫码添加
GreatSQL社区助手
微信好友,发送验证信息加群
。
【推荐】编程新体验,更懂你的AI,立即体验豆包MarsCode编程助手
【推荐】凌霞软件回馈社区,博客园 & 1Panel & Halo 联合会员上线
【推荐】抖音旗下AI助手豆包,你的智能百科全书,全免费不限次数
【推荐】博客园社区专享云产品让利特惠,阿里云新客6.5折上折
【推荐】轻量又高性能的 SSH 工具 IShell:AI 加持,快人一步