网络监控bigsister的安装

以下文章引自http://140.111.74.38/blog/post/2/630

Big Sister 官方網站：http://www.bigsister.ch/
Big Sister 是一套網路監控軟體，利用 SNMP 來查詢遠端主機的狀況，可以幫助網路管理人員完成以下的功： • 監控網路系統 • 提供一個簡單的方式，可以即時查看目前的網路狀態 • 當您的系統發生緊要的事件時，通知你 • 產生網路歷史資料的變化 • 記錄和顯示各種系統的資料

在 CentOS 5.x 下安裝方式： 1. 安裝所需套件 # yum install net-snmp net-snmp-utils net-snmp-perl perl-CGI-SpeedyCGI rrdtool-perl rrdtool 2. 下載 bigsister 套件 # wget http://prdownloads.sourceforge.net/bigsister/bigsister-1.02-4.noarch.rpm # wget http://prdownloads.sourceforge.net/bigsister/bigsister-agent-1.02-4.noarch.rpm # wget http://prdownloads.sourceforge.net/bigsister/bigsister-server-1.02-4.noarch.rpm

3. 進行安裝 # rpm -Uvh bigsister*.rpm

4. 重新啟動 Web Server # service httpd restart

5. 啟動 BigSister # service bigsister restart 6. 檢查是否有正常啟動 # netstat -anpltu | grep LISTEN | grep 1984 tcp        0      0 0.0.0.0:1984                0.0.0.0:*                   LISTEN      25534/bbd
7. 設定檔的位置 /etc/bigsister 目錄之下     # 主要顯示設定檔     bb-display.cfg     # 設定權限     permissions     # 設定事件發生時反應方式     bb_event_generator.cfg     # 設定事件發生時通知方式     notify.cfg     uxmon-net 8. 修改設定檔 # vim /etc/bigsister/uxmon-net # Agent Configuration File # The Big Sister Server expects communication # every 10 minutes or server is considered down #----------------------------------------------------- # Set the default SNMP community to "public", the # # Set default frequency to 5 minutes for "ALL" checks # KEYWORD       Default settings                        Apply To TEST #-------------  ---------------------------             ----------------- # 預設每 5 分鐘檢查一次 DEFAULT         community=public frequency=5 perf=5     ALL DEFAULT         version=1 proto=udp                     rpc DEFAULT         proto=udp                               ping

# Information about defined systems to monitor using DESCR command. # # KEYWORD       SYSTEM FEATURES                         Apply To HOST #---------      --------------------------              ------------ # 偵測的主機類型 DESCR           features=unix,linux                     localhost # DESCR         features=unix,sysv,solaris              someotherhost

# Run the following tests. # Note: host1(host2) is reported under host2 # Note: host can be an IP address # Report Host   Health Test List #------------   ---------------------------------- # 要監控的服務 localhost       load memory network cpuload localhost       disk # localhost     syslog localhost       proc=sshd procs proc=snmpd procs        proc=httpd procs      proc=httpd procs localhost       users

# EDIT THIS, replace localhost by the name or IP address of your Big Sister server # # BigSis Server bsdisplay /options #------------   ----------------------------------- # 如果是 Client 端，localhost 要改成 BigSister Server IP localhost       bsdisplay

# include file for specific hosts, do not name it uxmon-net.* as a new # process is started for every file matching that pattern include include_checks.$HOST