帧中继的几个概念
dlci,lmi


3种拓扑:星型,全网络,部分网络;

inverse arp :dlci与ip等上层协议之间的map关系


设置pvc
首先 设置frame relay类型
     接口模式下: encapsulation frame-relay [cisco | ietf]
设置ip地址和带宽(Kbps)
       ip address
      bandwidth
设置lmi
      frame-relay lmi-type [ansi | cisco | q933a](默认cisco)
This command is only needed if using Cisco IOS Release 11.1 or earlier. With IOS Release 11.2 or later, the LMI-type is autosensed and no configuration is needed.

配置静态映射
frame-relay map protocol protocol-address dlci [broadcast]


配置nbma环境下的frame-relay
An NBMA environment is viewed like other multiaccess media environments such as Ethernet, where all the routers are on the same subnet

配置动态映射
frame-relay interface-dlci #

子接口 两种形式