zookeeper的安装和启动

　　最近的手上一个项目要用到dubbo,顺便研究下zookeeper

1、下载

　　下载地址：http://www.apache.org/dyn/closer.cgi/zookeeper/ ，下载解压到D:\tools 如下图所示：

2、启动

　　进入bin文件夹下，如下图：

3、运行(windows环境)

　　双击zkServer.cmd，发现闪退

4、问题解决

　　打开zkServer.cmd进行编辑，在尾部加pause,如下图：

保存，再次双击，发现找不到zoo.cfg文件，如下图：

进入conf文件夹下，将zoo_sample.cfg文件复制一份修改为zoo.cfg,如下图：

修改zoo.cfg

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.
dataDir=D:/tools/zookeeper-3.4.9/data
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1

　　至此ZooKeeper在Windows操作系统中安装配置完毕，但需要指出的是ZooKeeper是使用java编写的，因此运行ZooKeeper之前必须安装Java环境——配置JDK，且JDK的版本要大于或等于1.6。

5、再次启动

　　双击zkServer.cmd,出现如下界面，则启动成功