关于这个问题我们首先来看一下AIX的vg的3种类型：
original vg 普通卷组
big vg 大卷组
scalable vg
动态的或者可扩展的卷组
如何快速区分这三组卷组呢？
通过其参数MAX
PVS，上述3个类型的卷组对应的限制是：32、128、1024;除此之外，还可以通过readvgda命令来读取pv的元数据判断。
好了，实际来看几个例子。
db1:/#uname
-a
AIX db1 1 6 00F7B72A4C00
db1:/#oslevel
-r
6100-07
这是一台aix6.1下的环境，含有rootvg和vg01两个卷组：
db1:/#lsvg
-o
vg01
rootvg
其中rootvg当然是系统使用的vg，vg01是准备用来被oracle使用的。
现有pv如下：
db1:/#lspv
hdisk0
00f7b72ab2370b93 rootvg active
hdisk1 00f7b72aacb2dab0 rootvg
active
hdisk2 none
None
hdisk3
none None
hdisk4 none
None
hdisk5
none None
hdisk6 none
None
hdisk7
none None
hdisk8 00f7b72af78cefac vg01
active
hdisk9 00f7b72af78cf3f9
vg01 active
hdisk10
00f7b72af78cf834 vg01 active
hdisk11 00f7b72af7a7bf97
diskhb
现在我们通过MAX PVS这个参数判断卷组类型：
db1:/#lsvg
rootvg
VOLUME GROUP: rootvg VG IDENTIFIER:
00f7b72a00004c000000013bb2371f49
VG STATE: active
PP SIZE: 512 megabyte(s)
VG PERMISSION: read/write
TOTAL PPs: 1116 (571392 megabytes)
MAX LVs:
256 FREE PPs: 650 (332800
megabytes)
LVs: 16 USED PPs: 466
(238592 megabytes)
OPEN LVs: 13
QUORUM: 1 (Disabled)
TOTAL PVs: 2 VG
DESCRIPTORS: 3
STALE PVs: 0 STALE PPs:
0
ACTIVE PVs: 2 AUTO ON: yes
MAX PPs
per VG: 32512
MAX PPs per PV:
1016 MAX PVs: 32
LTG size (Dynamic): 1024
kilobyte(s) AUTO SYNC: no
HOT SPARE:
no BB POLICY: relocatable
PV RESTRICTION:
none INFINITE RETRY: no
db1:/#lsvg vg01
VOLUME
GROUP: vg01 VG IDENTIFIER:
00f7b72a00004c000000013ef78cf9e8
VG STATE: active
PP SIZE: 256 megabyte(s)
VG PERMISSION: read/write
TOTAL PPs: 3597 (920832 megabytes)
MAX LVs:
256 FREE PPs: 3565 (912640
megabytes)
LVs: 2 USED PPs: 32
(8192 megabytes)
OPEN LVs: 0 QUORUM:
2 (Enabled)
TOTAL PVs: 3 VG DESCRIPTORS:
3
STALE PVs: 0 STALE PPs: 0
ACTIVE
PVs: 3 AUTO ON: no
MAX PPs per VG:
32768 MAX PVs: 1024
LTG size (Dynamic): 256
kilobyte(s) AUTO SYNC: no
HOT SPARE:
no BB POLICY: relocatable
MIRROR POOL STRICT:
off
PV RESTRICTION:
none INFINITE RETRY: no
根据参数我们可以得出rootvg是original
vg，而vg01是scalable vg，通过readvgda也可以得出相同的结论：
db1:/#readvgda hdisk0 | grep -i
type
..... readvgda_type: smallvg
vgtype: 0
对应的0就是original
vg了，其他的还有1对应big vg，2对应scalable vg。
接下来我们看下关于4k
offset的问题。首先分别在original和scalable vg创建2个lv，一共4个lv：
db1:/#/usr/sbin/mklv
-y'lv_system03_512' -t'raw' rootvg 4
lv_system03_512
db1:/#/usr/sbin/mklv
-T O -y'lv_system04_512' -t'raw' rootvg
4
lv_system04_512
db1:/#/usr/sbin/mklv -y'lv_system01_4g' -t'raw' vg01
16
lv_system01_4g
db1:/#/usr/sbin/mklv -T O -y'lv_system02_4g' -t'raw'
vg01 16
lv_system02_4g
查看下创建出来的lv：
db1:/#lslv
lv_system03_512
LOGICAL VOLUME: lv_system03_512 VOLUME GROUP:
rootvg
LV IDENTIFIER: 00f7b72a00004c000000013bb2371f49.15
PERMISSION: read/write
VG STATE: active/complete LV
STATE: closed/syncd
TYPE: raw WRITE
VERIFY: off
MAX LPs: 512 PP SIZE: 512
megabyte(s)
COPIES: 1 SCHED POLICY:
parallel
LPs: 4 PPs:
4
STALE PPs: 0 BB POLICY:
relocatable
INTER-POLICY: minimum RELOCATABLE:
yes
INTRA-POLICY: middle UPPER BOUND: 32
MOUNT
POINT: N/A LABEL: None
MIRROR WRITE
CONSISTENCY: on/ACTIVE
EACH LP COPY ON A
SEPARATE PV ?: yes
Serialize IO ?:
NO
INFINITE RETRY:
no
db1:/#lslv lv_system04_512
LOGICAL
VOLUME: lv_system04_512 VOLUME GROUP: rootvg
LV IDENTIFIER:
00f7b72a00004c000000013bb2371f49.16 PERMISSION: read/write
VG
STATE: active/complete LV STATE:
closed/syncd
TYPE: raw WRITE VERIFY:
off
MAX LPs: 512 PP SIZE: 512
megabyte(s)
COPIES: 1 SCHED POLICY:
parallel
LPs: 4 PPs:
4
STALE PPs: 0 BB POLICY:
relocatable
INTER-POLICY: minimum RELOCATABLE:
yes
INTRA-POLICY: middle UPPER BOUND: 32
MOUNT
POINT: N/A LABEL: None
MIRROR WRITE
CONSISTENCY: on/ACTIVE
EACH LP COPY ON A
SEPARATE PV ?: yes
Serialize IO ?:
NO
INFINITE RETRY: no
db1:/#lslv lv_system01_4g
LOGICAL VOLUME: lv_system01_4g
VOLUME GROUP: vg01
LV IDENTIFIER: 00f7b72a00004c000000013ef78cf9e8.1
PERMISSION: read/write
VG STATE: active/complete LV
STATE: closed/syncd
TYPE: raw WRITE
VERIFY: off
MAX LPs: 512 PP SIZE: 256
megabyte(s)
COPIES: 1 SCHED POLICY:
parallel
LPs: 16 PPs:
16
STALE PPs: 0 BB POLICY:
relocatable
INTER-POLICY: minimum RELOCATABLE:
yes
INTRA-POLICY: middle UPPER BOUND: 1024
MOUNT
POINT: N/A LABEL: None
MIRROR WRITE
CONSISTENCY: on/ACTIVE
EACH LP COPY ON A
SEPARATE PV ?: yes
Serialize IO ?:
NO
INFINITE RETRY:
no
DEVICESUBTYPE:
DS_LVZ
COPY 1 MIRROR POOL:
None
COPY 2 MIRROR POOL:
None
COPY 3 MIRROR POOL:
None
db1:/#lslv lv_system02_4g
LOGICAL
VOLUME: lv_system02_4g VOLUME GROUP: vg01
LV IDENTIFIER:
00f7b72a00004c000000013ef78cf9e8.2 PERMISSION: read/write
VG
STATE: active/complete LV STATE:
closed/syncd
TYPE: raw WRITE VERIFY:
off
MAX LPs: 512 PP SIZE: 256
megabyte(s)
COPIES: 1 SCHED POLICY:
parallel
LPs: 16 PPs:
16
STALE PPs: 0 BB POLICY:
relocatable
INTER-POLICY: minimum RELOCATABLE:
yes
INTRA-POLICY: middle UPPER BOUND: 1024
MOUNT
POINT: N/A LABEL: None
MIRROR WRITE
CONSISTENCY: on/ACTIVE
EACH LP COPY ON A
SEPARATE PV ?: yes
Serialize IO ?:
NO
INFINITE RETRY:
no
DEVICESUBTYPE:
DS_LVZ
COPY 1 MIRROR POOL:
None
COPY 2 MIRROR POOL:
None
COPY 3 MIRROR POOL:
None
结合结果，有如下结论：
0. Origninal
VG无论是否使用“-T O”参数，创建出来的lv都是DS_LV;
1. Scalable VG无论是否使用“-T
O”参数，创建出来的lv都是DS_LVZ;
2. Big VG使用“-T
O”参数创建出来的lv是DS_LVZ类型，否则是DS_LV类型。
通过查看lv的属性DEVICESUBTYPE：DS_LVZ也就是没有偏移的lv，初次之外Oracle也提供了一个工具来检查是有offset：
db1:/#ls
-l /dev/lv_*
brw-rw---- 1 root system 53, 1 Jul 02 09:12
/dev/lv_system01_4g
brw-rw---- 1 root system 53, 2 Jul 02 09:15
/dev/lv_system02_4g
brw-rw---- 1 root system 10, 15 Jul 02 09:16
/dev/lv_system03_512
brw-rw---- 1 root system 10, 16 Jul 02
09:18 /dev/lv_system04_512
db1:/#ls -l /dev/rlv_*
crw-rw---- 1 root
system 53, 1 Jul 02 09:12 /dev/rlv_system01_4g
crw-rw---- 1
root system 53, 2 Jul 02 09:15 /dev/rlv_system02_4g
crw-rw----
1 root system 10, 15 Jul 02 09:16
/dev/rlv_system03_512
crw-rw---- 1 root system 10, 16 Jul 02
09:18 /dev/rlv_system04_512
其中每个lv对应有快设备和字符设备，oracle使用的是字符设备：
db1:/#chown
oracle:oinstall /dev/rlv_*
db1:/#chmod 700 /dev/rlv_*
db1:/#ls -l
/dev/rlv_*
crwx------ 1 oracle oinstall 53, 1 Jul 02 09:12
/dev/rlv_system01_4g
crwx------ 1 oracle oinstall 53, 2 Jul 02
09:15 /dev/rlv_system02_4g
crwx------ 1 oracle oinstall 10, 15 Jul
02 09:16 /dev/rlv_system03_512
crwx------ 1 oracle oinstall 10, 16
Jul 02 09:18
/dev/rlv_system04_512
由于该工具只能检查被用于数据文件的lv，因此只能在被使用之后检查，现在先删除掉上述4个lv，之后重新创建用于测试，注意要用root用户执行：
db1:/oracle$
dbfsize /dev/rlv_system01_4g
/dev/rlv_system01_4g: Header block magic number
is bad; trying raw file format...
/dev/rlv_system01_4g: Header block magic
number is bad
db1:/oracle$ dbfsize /dev/rlv_system03_512
/dev/rlv_system03_512: Header block magic number is bad
删除 rmlv -f
'rlv_system01_4g' rmlv -f 'rlv_system02_4g' rmlv -f 'rlv_system03_512' rmlv -f
'rlv_system04_512'
在创建数据库之后重新执行下如下结果就可以结果：
db1:/#/oracle/app/oracle/product/10.2/db1/bin/dbfsize
/dev/lv_control_01
Database file: /dev/lv_control_01
Database file
type: raw device without 4K starting offset
Database file size: 334 16384
byte blocks
这个是没有offset的.
接着来看下有offset的结果：
/usr/sbin/mklv
-y'lvtest' -t'raw' rootvg 1
chown oracle:oinstall
/dev/rlvtest
chmod 700 /dev/rlvtest
db1:/#su - oracle
db1:/oracle$
sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.4.0 - Production on Tue Jul
2 11:50:32 2013
Copyright (c) 1982, 2007, Oracle. All Rights
Reserved.
Connected to:
Oracle Database 10g Enterprise Edition
Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data
Mining and Real Application Testing options
SQL> create tablespace
gtlions datafile '/dev/rlvtest' size 10m;
Tablespace
created.
SQL> exit
Disconnected from Oracle Database 10g Enterprise
Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP,
Data Mining and Real Application Testing options
db1:/oracle$
/oracle/app/oracle/product/10.2/db1/bin/dbfsize /dev/lvtest
Database
file: /dev/lvtest
Database file type: raw device
Database file size:
1280 8192 byte blocks
而且使用有offset的lv创建表空间的时候在后台日志也会做相应的记录并提出建议：
create tablespace gtlions
datafile '/dev/rlvtest' size 10m
WARNING: You are creating datafile
/dev/rlvtest.
WARNING: Oracle recommends creating new datafiles on devices
with zero offset. The command "/usr/sbin/mklv -y LVname -T O -w n -s n -r n
VGname NumPPs" can be used. Please contact Oracle customer support for more
details.
WARNING: You are creating/reusing datafile /dev/rlvtest.
WARNING:
Oracle recommends creating new datafiles on devices with zero offset. The
command "/usr/sbin/mklv -y LVname -T O -w n -s n -r n VGname NumPPs" can be
used. Please contact Oracle customer support for more details.
Completed:
create tablespace gtlions datafile '/dev/rlvtest' size 10m
转载：http://blog.csdn.net/gtlions/article/details/9223705
