NModbus4的使用

NModbus4的使用

 

目录

• 步骤1：打开串口
• 步骤二：创建ModbusSerialMaster，设置超时参数
• 步骤三：设置协议参数，开始读写
• 可选步骤四：以async await方式读写

 

---

回到顶部

步骤1：打开串口                                                                                                   

SerialPort port = new SerialPort("COM7")
port.BaudRate = 9600;
port.BaudRate = 9600;
port.DataBits = 8;
port.Parity = Parity.Odd;
port.StopBits = StopBits.One;
port.Open();    

                

回到顶部

步骤二：创建ModbusSerialMaster，设置超时参数                                            

var master = ModbusSerialMaster.CreateRtu(port);
master.Transport.ReadTimeout = 2000;
//其中transport还有重试次数和重试间隔时间，默认是3和250
//master.Transport.Retries + "  " + master.Transport.WaitToRetryMilliseconds;

回到顶部

步骤三：设置协议参数，开始读写                                                                       

 byte slaveID = 3;
ushort address = 1;
bool[] coils = new bool[8];

coils = master.ReadCoils(slaveID, address, 1);

以上面方式读线圈，超时就会抛出异常。

回到顶部

可选步骤四：以async await方式读写                                                                

比如点击按钮之后，调用AcquireStatus 方法

        private async void AcquireStatus(ModbusSerialMaster master)
        {
            byte slaveID = 3;

            ushort address = 1;
            bool[] coils=null;
            master.Transport.ReadTimeout = 2000;
            try {coils=await master.ReadCoilsAsync(slaveID, address, 1); }
            catch (Exception ex)
            {
                MessageBox.Show("your value " + "无返回值");
            }
            
            if (coils != null)
            {
                this.checkBox1.Checked = coils[0];
                MessageBox.Show("your value " + coils[0]);
            }

        }