ABB AC 900F学习笔记122:Freelance_Engineering_Process_Stations-28
继续学习
A.3 Object data: AC 800F and AC 800FR
跳过这一节
A.4 Object data: AC 700F
跳过这一节
A.5 Object data: PROFIBUS modules
对象数据:PROFIBUS 模板
A.5.1 Parameters - CM 772F/CI 773F PROFIBUS module
参数 - CM 772F/CI 773F PROFIBUS 模板
Name
命名
|
Data type
数据类型
|
Conf.
配置
|
Acc.
访问
|
Comment
注释
|
SlotID
槽号
|
INT16
16位整数
|
yes
用户可以配置
|
RO
只读
|
Slot of module 0..3
模板槽号0……3
|
BoardType
板类型
|
WORD
字
|
NO 用户不可配置 (系统决定) |
RO
只读
|
Internal hardware designation
内部硬件设计
|
A.5.2 Parameters - CI 930F PROFIBUS module
参数 - CI 930F PROFIBUS 模板
Name
命名
|
Data type
数据类型
|
Conf.
配置
|
Acc.
访问
|
Comment
注释
|
SlotID
槽号
|
INT16
16位整数
|
yes
用户可以配置
|
RO
只读
|
Slot of module 0..3
模板槽号0……3
|
BoardType
板类型
|
WORD
字
|
NO 用户不可配置 (系统决定) |
RO
只读
|
Internal hardware designation
内部硬件设计
|
IsRed
是否冗余
|
BOOL 布尔 |
NO 用户不可配置 (系统决定) |
RO
只读
|
TRUE: active redundancy mode
真:激活冗余模式
|
A.5.3 Diagnostic data - PROFIBUS modules
诊断数据 - PROFIBUS 模板
The PROFIBUS modules CM 772F/CI 773F and PM 930F (redundant and nonredundant) provide the same diagnostic data; only the STA bit encoding is different for redundant and non-redundant use.
PROFIBUS模板CM 772F/CI 773F和PM 930F (冗余和非冗余)提供同样的诊断数据;只有STA编码在冗余和非冗余使用下不同。
Name
命名
|
Data
type
数据类型
|
Comment
注解
|
ERR
错误
|
BOOL 布尔 |
TRUE: Error on module
真:模板错误
|
STA
状态
|
UDINT
无符号双整型
|
Bit-encoded error
位编码错误
|
STA error codes - CM 772F//CI 773F and CI 930F (non-redundant)
STA 错误代码 -CM 772F/CI 773F和CI 930F(非冗余)
Bit # in
STA
状态位
|
Decimal error
code
十进制错误代码
|
Hexadecimal
error code
十六进制错误代码
|
Error
错误
|
cause 原因 |
0 | 1 | 0x0001 |
Wrong module
错误的模板
|
Wrong module type plugged
(for example, CI 930F configured, but CM 772F plugged)
插入错误的模板类型
(比如,配置CI 930F,但插入了CM 772F模板)
|
1 | 2 | 0x0002 |
Empty slot
空插槽
|
Empty slot (for example, CI 930F configured, but no module plugged)
空插槽(比如,配置了CI 930F,结果没有插模板)
|
2 | 4 | 0x0004 |
Identification
error
标识错误
|
No identification of module possible
可能没有识别出模板
|
3 | 8 | 0x0008 |
Self-test error
自检错误
|
Module error (self-test error) issued (for example, by the PROFIBUS master). Error code is communicated with alarm message.
模板错误(自检错误)发出(比如,作为PROFIBUS主站)。错误代码与警告信息通信。
|
4 | 16 |
0x0010
|
old self-test
error
旧自检错误
|
Old hardware self-test errors
硬件自检旧错误
|
Example:
例如:
STA = 24 (decimal) => 0x0018 => old hardware errors in module and self-test error in module.
STA值为24(十进制),十六进制18,模板硬件旧错误和模板自检错误。
STA error code - CI 930F (redundant)
STA错误 -CI 930(冗余)
In the redundant mode the states of both controllers are combined into STA diagnosis data:
在冗余模式下,将两个控制器的状态合并为STA诊断数据。
-
The status of controller IP1 is set to “Low nibble” of STA diagnosis data
- 控制器IP1的状态设置为STA诊断数据的低8位。
-
The status of controller IP2 is set to “High nibble” of STA diagnosis data.
- 控制器IP2的状态设置为STA诊断数据的高8位。
Bit # in
STA
状态位
|
Decimal error
code
十进制错误代码
|
Hexadecimal
error code
十六进制错误代码
|
Error
错误
|
Cause
原因
|
0 | 1 | 0x0001 |
Wrong module in controller IP1
控制器IP1错误的模板
|
Wrong module type plugged (for example, CI 930F configured, but CM 772F plugged) in controller IP1
控制器IP1插入错误的模板
(比如,配置的CI 930F,但插入了CM 772F模板)
|
1 | 2 | 0x0002 |
Empty slot in controller IP1
控制器IP1空插槽
|
Empty slot (for example, CI 930F configured, but no module plugged) in controller IP1
控制器IP1空插槽(比如,配置了CI 930F,但没有插模板)
|
2 | 4 | 0x0004 |
Identification error in controller IP1
控制器IP1没有识别出模板
|
No identification of module possible in controller IP1
控制器IP1可能没识别出模板
|
3 | 8 |
0x0008
|
Self-test error in module of controller IP1
控制器IP1模板自检错误
|
Self-test error, module error issued (for example, by the
PROFIBUS master) in controller IP1. Error code is communicated with alarm message.
控制器IP1模板错误(自检错误)发出(比如,作为PROFIBUS主站)。错误代码与警告信息通信。
|
4 | 16 |
0x0010
|
Old self-test error in module of controller IP1
控制器IP1模块自检旧错误
|
Old hardware self-test errors in controller IP1
控制器IP1模板自检旧错误
|
8 | 256 |
0x0100
|
Wrong module in controller IP2
控制器IP2错误的模板
|
Wrong module type plugged (for example, CI 930F configured, but CM 772F plugged) in controller IP2
控制器IP2插入错误的模板
(比如,配置的CI 930F,但插入了CM 772F模板)
|
9 | 512 |
0x0200
|
Empty slot in controller IP2
控制器IP2空插槽
|
Empty slot (for example, CI 930F configured, but no module plugged) in controller IP2
控制器IP2空插槽(比如,配置了CI 930F,但没有插模板)
|
10 | 1024 |
0x0400
|
Identification error in controller IP2
控制器IP2没有识别出模板
|
No identification of module possible in controller IP2
控制器IP2可能没识别出模板
|
11 | 2048 |
0x0800
|
Self-test error in module of controller IP2
控制器IP2模板自检错误
|
Self-test error, module error issued (for example, by the PROFIBUS master) in controller IP2. Error code is communicated with alarm message.
控制器IP2模板错误(自检错误)发出(比如,作为PROFIBUS主站)。错误代码与警告信息通信。
|
12 | 4096 |
0x1000
|
Old self-test error in module of controller IP2
控制器IP2模块自检旧错误
|
Old hardware self-test errors in controller IP2
控制器IP2模板自检旧错误
|
Example:
例如:
STA = 4098 (decimal) => 0x1002 => old hardware errors in module IP2 and empty slot in module IP1.
STA数值4098(十进制),0x1002十六进制,表示控制器IP2硬件错误和控制器IP1空插槽错误。
至此,这个文档看完了,下一个文档学习freelance 工程师站