ABB AC900学习笔记56：Freelance_Mounting_and_Installation_AC_900F_Controller

     The following section provides information on the AC 900F accessories and their application. In addition, the features and the handling are described. The technical data of the accessories are included in Section 9, Technical Data.

      下面的章节提供AC900F附件及其应用的信息。此外，对其特性和处理方法也有描述。附件的技术数据在第九章-数据表。

4.1 Controller accessories

控制器附件

The components listed below are accessories for the controller. Some are optional,others are required to ensure the intended controller operation.

下面所列组件时控制器的附件。有些是可选项，其他的需要符合控制器预期的操作。

4.1.1 TD 951F display unit

TD 951F显示单元

The TD 951F display unit is an optional AC 900F accessory. It features a dot-matrix LCD display with 128 x 64 pixel resolution as well as keys with fixed and variable functions.

TD 951F显示单元是AC900F控制器的可选组件。

Use

作用

The display unit is used for the following functions:

该显示单元用于下列功能

• Network settings 网络设置
• Status display 状态显示
• Display of process and diagnostic data 过程和诊断数据显示
• Module change 模板更改
• Application backup/restoring 应用备份/恢复
• Firmware updating 固件升级
• Safety settings 安全设置
• Memory image 存储镜像

Functions功能

 

Key 键	Key Description 键描述
	Function keys F1 to F4. Select a menu or enable a function. For details about menus and functions refer to Section 7 and 8. 功能键F1到F4。选择菜单或者使能一项功能。菜单和功能细节参照第七章和第八章
	Move right or select next  移到右边或选择下一个
	Move left or select previous  移到左边或选择上一个
	Move up (selection) or increase value by 1 向上移动，或者数值加1
	Move down (selection) or decrease value by 1 向下移动，或者数值减1
	Quit menu without data saving or acknowledging 退出菜单，不保存修改和不确认
	Quit menu upon data saving or acknowledging 退出菜单，保存数字修改或者确认

If the display shows the message “Display firmware update required” after inserting, a firmware update is necessary. The firmware for the display is automatically loaded along with the AC 900F controller. 如果插入后显示信息“固件需要更新”，就需要更需固件。显示所需固件从AC900F控制器自动加载