设置c#windows服务描述及允许服务与桌面交互的几种方法（作者博客还有一大堆C#创建服务的文章）

方法一：

在ProjectInstaller.cs重写 install() ,Uninstall()方法

public override void Install(IDictionary stateServer)
  {
   Microsoft.Win32.RegistryKey system,
    //HKEY_LOCAL_MACHINE/Services/CurrentControlSet
    currentControlSet,
    //.../Services
    services,
    //.../<Service Name>
    service,
    //.../Parameters - this is where you can put service-specific configuration
    config;

   try
   {
    //Let the project installer do its job
    base.Install(stateServer);

    //Open the HKEY_LOCAL_MACHINE/SYSTEM key
    system = Microsoft.Win32.Registry.LocalMachine.OpenSubKey("System");
    //Open CurrentControlSet
    currentControlSet = system.OpenSubKey("CurrentControlSet");
    //Go to the services key
    services = currentControlSet.OpenSubKey("Services");
    //Open the key for your service, and allow writing
    service = services.OpenSubKey(this.serviceInstaller1.ServiceName, true);
    //Add your service's description as a REG_SZ value named "Description"
    service.SetValue("Description","PI实时数据采集：能源--每天8点或20点取一次数据；汽车衡--每天1点取一次数据；设备状态--每分钟取一次数据。");
    //(Optional) Add some custom information your service will use...
    //允许服务与桌面交互
    service.SetValue("Type",0x00000110);
    config = service.CreateSubKey("Parameters");
   }
   catch(Exception e)
   {
    Console.WriteLine("An exception was thrown during service installation:/n" + e.ToString());
   }
  }

  public override void Uninstall(IDictionary stateServer)
  {
   Microsoft.Win32.RegistryKey system,
    currentControlSet,
    services,
    service;

   try
   {
    //Drill down to the service key and open it with write permission
    system = Microsoft.Win32.Registry.LocalMachine.OpenSubKey("System");
    currentControlSet = system.OpenSubKey("CurrentControlSet");
    services = currentControlSet.OpenSubKey("Services");
    service = services.OpenSubKey(this.serviceInstaller1.ServiceName, true);
    //Delete any keys you created during installation (or that your service created)
    service.DeleteSubKeyTree("Parameters");
    //...
   }
   catch(Exception e)
   {
    Console.WriteLine("Exception encountered while uninstalling service:/n" + e.ToString());
   }
   finally
   {
    //Let the project installer do its job
    base.Uninstall(stateServer);
   }
  }

方法二：

此方法经测试，发现无效，勾是选上了，但程序启动后还是没有界面出现，好像需要电脑重启才生效

我们写一个服务，有时候要让服务启动某个应用程序，就要修改服务的属性，勾选允许服务与桌面交互，

可以用修改注册表实现，我们必须在安装后操作，所以请重写Installer的OnAfterInstall。

        protected override void OnAfterInstall(System.Collections.IDictionary savedState) {
            RegistryKey rk = Registry.LocalMachine;
            string key = @"SYSTEM/CurrentControlSet/Services/" + this.sInstaller.ServiceName;
            RegistryKey sub = rk.OpenSubKey(key, true);
            int value = (int)sub.GetValue("Type");
            if (value < 256) {
                sub.SetValue("Type", value | 256);
            }
            base.OnAfterInstall(savedState);
        }

onstart的时候修改注册表   
   [HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/你的服务名]   
   "Type"=dword:00000010   
   key    value＋256   
   比如现在00000010是16＋256＝272   
   16进制就是00000110 

方法三：

使用System.ServiceProcess.ServiceController

            ConnectionOptions coOptions = new ConnectionOptions();

            coOptions.Impersonation = ImpersonationLevel.Impersonate;

            ManagementScope mgmtScope = new System.Management.ManagementScope(@"root/CIMV2", coOptions);

            mgmtScope.Connect();

            ManagementObject wmiService;

            wmiService = new ManagementObject("Win32_Service.Name='" + ServiceController.ServiceName + "'");

            ManagementBaseObject InParam = wmiService.GetMethodParameters("Change");

            InParam["DesktopInteract"] = true;

            ManagementBaseObject OutParam = wmiService.InvokeMethod("Change", InParam, null);

            ServiceController.Start();

描述：在自己写的一个系统服务程序，需要经常用到“允许与桌面进行交互”的设置，网上很多使用修改注册表的形式实现，我测试过，修改注册表后，选中的勾是选上了，
但不能弹出应用程序；据说重启电脑后可以，但我不想重启，实际应用也不允许重启，故没有测试重启是否可行的情况。如图：

 
例如：
当我需要运行服务程序的时候，弹出我的应用程序，则要在Windows服务“允许服务与桌面交互”中打勾，
当我不想弹出应用程序界面的时候，则去掉其中的勾选。
实现方式：
1.在服务程序安装时编程实现，ProjectInstaller.cs

using System;
using System.Collections;
using System.Collections.Generic;
using System.ComponentModel;
using System.Configuration.Install;
//using System.Linq;
using Microsoft.Win32; //对注册表操作一定要引用这个命名空间


namespace MonitorService
{
    [RunInstaller(true)]
    public partial class ProjectInstaller : Installer
    {
        public ProjectInstaller()
        {
            InitializeComponent();            
            //this.Context.Parameters["ServerCode"].ToString(); // 读取安装时输入的服务器编号           
        }

        private void ProjectInstaller_AfterInstall(object sender, InstallEventArgs e)
        {
            //设置允许服务与桌面交互
            SetServiceTable("MonitorService");            
        }
        /// <summary>
        /// 设置允许服务与桌面交互 ,修改了注册表，要重启系统才能生效
        /// </summary>
        /// <param name="ServiceName">服务程序名称</param>
        private void SetServiceTable(string ServiceName)
        {
            RegistryKey rk = Registry.LocalMachine;
            string key = @"SYSTEM/CurrentControlSet/Services/" + ServiceName;
            RegistryKey sub = rk.OpenSubKey(key, true);
            int value = (int)sub.GetValue("Type");
            sub.SetValue("Type", value | 256);
        }
    }
}
 
2.注册表修改
onstart的时候修改注册表   
   [HKEY_LOCAL_MACHINE"SYSTEM"CurrentControlSet"Services"你的服务名]   
   "Type"=dword:00000010   
   key    value＋256   
   比如现在00000010是16＋256＝272   
   16精制就是00000110
 
3.SC程序修改， 允许与桌面进行交互
 在dos命令提示符下输入：
sc config MonitorService type= interact type= own
 回车即可。
可以用批处理的方式实现，把下面代码保存为 myservice.bat 即可：
 rem 配置服务程序为允许与桌面进行交互方式
@echo "准备停止服务程序..."
sc stop MyService
@echo "设置允许与桌面进行交互方式允许"
sc config MyService type= interact type= own
@echo "正在重新启动服务..."
sc start MyService
@echo "启动服务成功！"
 
取消“允许与桌面进行交互”
DOS命令提示符下运行下面语句即可：
 sc config MyService type= own
 
 
经测试：1，2 可以选中“允许与桌面进行交互”，但启动服务的时候，不能弹出应用程序的界面。
           3 可以完美实现所有要求。
至此，我遇到的问题也完美的得到解决。
 
 
用VS2003部署，让服务程序安装完后立即启动服务并且选中“允许服务与桌面交互”及添加服务描述的方法
 
<textarea cols="50" rows="15" name="code" class="c-sharp">-----------立即启动-------------- 
private void serviceInstaller1_AfterInstall(object sender, System.Configuration.Install.InstallEventArgs e) 
{ 
ServiceController myService = new ServiceController("XJOAPigeonholeServer"); 
myService.Start(); 
myService.Dispose(); 
} 


添加描述：1.1没有直接方法，2.0里有直接的方法 ServiceInstaller.Description 
//----------------------------添加服务描述信息 开始 ------------ 
public override void Install(IDictionary stateServer) 
{ 
Microsoft.Win32.RegistryKey system, 
//HKEY_LOCAL_MACHINE/Services/CurrentControlSet 
currentControlSet, 
//.../Services 
services, 
//.../ &lt;Service Name&gt; 
service, 
//.../Parameters - this is where you can put service-specific configuration 
config; 
try 
{ 
//Let the project installer do its job 
base.Install(stateServer); 

//Open the HKEY_LOCAL_MACHINE/SYSTEM key 
system = Microsoft.Win32.Registry.LocalMachine.OpenSubKey("System"); 
//Open CurrentControlSet 
currentControlSet = system.OpenSubKey("CurrentControlSet"); 
//Go to the services key 
services = currentControlSet.OpenSubKey("Services"); 
//Open the key for your service, and allow writing 
service = services.OpenSubKey(this.serviceInstaller1.ServiceName, true); 
//Add your service's description as a REG_SZ value named "Description" 
service.SetValue("Description","XJOA系统自动归档服务(BeijiOffice)"); 
//(Optional) Add some custom information your service will use... 
//允许服务与桌面交互 
service.SetValue("Type",0x00000110); 
config = service.CreateSubKey("Parameters"); 
} 
catch(Exception e) 
{ 
Console.WriteLine("An exception was thrown during service installation:/n" + e.ToString()); 
} 
} 

public override void Uninstall(IDictionary stateServer) 
{ 
Microsoft.Win32.RegistryKey system, 
currentControlSet, 
services, 
service; 

try 
{ 
//Drill down to the service key and open it with write permission 
system = Microsoft.Win32.Registry.LocalMachine.OpenSubKey("System"); 
currentControlSet = system.OpenSubKey("CurrentControlSet"); 
services = currentControlSet.OpenSubKey("Services"); 
service = services.OpenSubKey(this.serviceInstaller1.ServiceName, true); 
//Delete any keys you created during installation (or that your service created) 
service.DeleteSubKeyTree("Parameters"); 
//... 
} 
catch(Exception e) 
{ 
Console.WriteLine("Exception encountered while uninstalling service:/n" + e.ToString()); 
} 
finally 
{ 
//Let the project installer do its job 
base.Uninstall(stateServer); 
} 
} 
//---------------------------- 结束 ---------------------------- </textarea> 
 
 
四、这一服务程序运行时没有图形界面？
不错，刚才直接运行mfc1.exe时我们看到了图形界面，但在服务列表中用右键菜单中的“启动”时却看不到任何界面。这该怎么办？
我们还需要在使用CreateService函数时(Install()中)，加上一个参数，这样才能允许程序与桌面交互，也就是可以显示界面。这个参数是SERVICE_INTERACTIVE_PROCESS。
填加后的CreateService：
　　SC_HANDLE hService = ::CreateService(
　　　　 hSCM, m_szServiceName, m_szServiceName,
　　　　 SERVICE_ALL_ACCESS,
SERVICE_WIN32_OWN_PROCESS | SERVICE_INTERACTIVE_PROCESS,
　　　　 SERVICE_DEMAND_START, SERVICE_ERROR_NORMAL,
　　　　 szFilePath, NULL, NULL, _T("RPCSS"), NULL, NULL);
　　再次编译mfc1，卸载服务后，安装服务。我们可以看到，通过服务列表启动mfc1，原有的对话框出现了。 
如需将服务设为自动启动，则将 SERVICE_DEMAND_START 改为 SERVICE_AUTO_START。

http://blog.csdn.net/jiangxinyu/article/details/5397060