(1)eth0 使用固定IP，访问内网
(2)eth1 使用DHCP，访问外网
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#
eth0="eth0 172.22.11.22 netmask 255.255.0.0 broadcast 172.22.11.255"
eth1="dhcp"
INTERFACES=(eth0 eth1)
