kafka安装

前置安装zookeeper：https://www.cnblogs.com/fch2w/p/15896757.html

1、官网下载安装包
官网地址：https://kafka.apache.org/downloads

2、解压安装
cd /home/fch/module
wget https://archive.apache.org/dist/kafka/2.8.0/kafka_2.12-2.8.0.tgz

tar -zxvf kafka_2.12-2.8.0.tgz

3、修改配置文件

点击查看代码

# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
 
# see kafka.server.KafkaConfig for additional details and defaults
 
############################# Server Basics #############################
 
# The id of the broker. This must be set to a unique integer for each broker.
broker.id=0
 
############################# Socket Server Settings #############################
 
# The address the socket server listens on. It will get the value returned from
# java.net.InetAddress.getCanonicalHostName() if not configured.
#   FORMAT:
#     listeners = listener_name://host_name:port
#   EXAMPLE:
#     listeners = PLAINTEXT://your.host.name:9092
listeners=PLAINTEXT://10.0.8.6:9092
 
# Hostname and port the broker will advertise to producers and consumers. If not set,
# it uses the value for "listeners" if configured.  Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
advertised.listeners=PLAINTEXT://xxxx:9092
advertise.host.name=xxxx
# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL
 
# The number of threads that the server uses for receiving requests from the network and sending responses to the network
num.network.threads=3
 
# The number of threads that the server uses for processing requests, which may include disk I/O
num.io.threads=8
 
# The send buffer (SO_SNDBUF) used by the socket server
socket.send.buffer.bytes=102400
 
# The receive buffer (SO_RCVBUF) used by the socket server
socket.receive.buffer.bytes=102400
 
# The maximum size of a request that the socket server will accept (protection against OOM)
socket.request.max.bytes=104857600
 
 
############################# Log Basics #############################
 
# A comma separated list of directories under which to store log files
log.dirs=/home/fch/module/kafka/logs
 
# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
num.partitions=1
 
# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
num.recovery.threads.per.data.dir=1
 
############################# Internal Topic Settings  #############################
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# For anything other than development testing, a value greater than 1 is recommended to ensure availability such as 3.
offsets.topic.replication.factor=1
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1
 
############################# Log Flush Policy #############################
# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# There are a few important trade-offs here:
#    1. Durability: Unflushed data may be lost if you are not using replication.
#    2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
#    3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to excessive seeks.
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.
 
# The number of messages to accept before forcing a flush of data to disk
#log.flush.interval.messages=10000
 
# The maximum amount of time a message can sit in a log before we force a flush
#log.flush.interval.ms=1000
 
############################# Log Retention Policy #############################
 
# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.
 
# The minimum age of a log file to be eligible for deletion due to age
log.retention.hours=168
 
# A size-based retention policy for logs. Segments are pruned from the log unless the remaining
# segments drop below log.retention.bytes. Functions independently of log.retention.hours.
#log.retention.bytes=1073741824
 
# The maximum size of a log segment file. When this size is reached a new log segment will be created.
log.segment.bytes=1073741824
 
# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
log.retention.check.interval.ms=300000
############################# Zookeeper #############################
 
# Zookeeper connection string (see zookeeper docs for details).
# This is a comma separated host:port pairs, each corresponding to a zk
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
zookeeper.connect=localhost:2181
 
# Timeout in ms for connecting to zookeeper
zookeeper.connection.timeout.ms=18000
 
 
############################# Group Coordinator Settings #############################
 
# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.
# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.
group.initial.rebalance.delay.ms=0

4、启动kafka
bin/kafka-server-start.sh config/server.properties

5、测试是否启动成功

点击查看代码

创建topic
bin/kafka-topics.sh --create --zookeeper localhost:2181 --replication-factor 1 --partitions 1 --topic dblab01
 
检查topic
bin/kafka-topics.sh --describe --zookeeper localhost:2181 --topic dblab01
列出所有topic
bin/kafka-topics.sh --list --zookeeper localhost:2181  
 
使用生产者
bin/kafka-console-producer.sh --broker-list localhost:9092 --topic dblab01
 
使用消费者
bin/kafka-console-consumer.sh --bootstrap-server zknode:9092 --topic dblab01 --from-beginning