jumpserver安装

一. 准备 Python3 和 Python 虚拟环境 1.1 安装依赖包
yum -y install wget sqlite-devel xz gcc automake zlib-devel openssl-devel epel-release git vim
1.2 编译安装
wget https://www.python.org/ftp/python/3.6.1/Python-3.6.1.tar.xz
tar xvf Python-3.6.1.tar.xz  && cd Python-3.6.1
./configure && make && make install
1.3 建立 Python 虚拟环境
 mkdir /software
 cd /software
 python3 -m venv py3
 source /software/py3/bin/activate
看到下面的提示符代表成功，以后运行 Jumpserver 都要先运行以上 source 命令，以下所有命令均在该虚拟环境中运行
(py3) [root@ywx542847 software]
如图 所示：
 
 
退出虚拟环境：deactivate
 
1.4 自动载入 Python 虚拟环境配置
此项仅为懒癌晚期的人员使用，防止运行 Jumpserver 时忘记载入 Python 虚拟环境导致程序无法运行。使用autoenv
cd /software
git clone https://github.com/kennethreitz/autoenv.git
echo 'source /software/autoenv/activate.sh' >> ~/.bashrc
source ~/.bashrc
(如果失败，可以去bashrc看一下目录地址是否正确，不正确可以手动修改一下)
配合jumpserver的.env环境
 
二. 安装 Jumpservercd /software 
git clone https://github.com/jumpserver/jumpserver.git && cd jumpserver && git checkout master
echo "source /software/py3/bin/activate" > /software/jumpserver/.env
cd /software/jumpserver/requirements/
 
 
在虚拟环境中安装依赖包
yum -y install $(cat rpm_requirements.txt)
 
 
2.1安装 Python 库依赖
 pip install -r requirements.txt -i https://pypi.python.org/simple
2.2 安装 Redis, Jumpserver 使用 Redis 做 cache 和 celery broke
yum -y install redis
systemctl enable redis
systemctl start redis
2.3 安装 MySQL
yum -y install mariadb mariadb-devel mariadb-server
systemctl enable mariadb
systemctl start mariadb
2.4 创建数据库 Jumpserver 并授权
$ mysql
> create database jumpserver default charset 'utf8';
> grant all on jumpserver.* to 'jumpserver'@'127.0.0.1' identified by 'weakPassword';
> flush privileges;
2.5 修改 Jumpserver 配置文件
cd /software/jumpserver
cp config_example.py config.py
vim config.py
注意: 配置文件是 Python 格式，不要用 TAB，而要用空格
 
 
2.6 生成数据库表结构和初始化数据
cd /software/jumpserver/utils
bash make_migrations.sh
 
 
2.7 运行 Jumpserver
cd /software/jumpserver
./jms start all  # 后台运行使用 -d 参数./jms start all -d
 
# 新版本更新了运行脚本，使用方式./jms start|stop|status|restart all  后台运行请添加 -d 参数
 
三. 安装 SSH Server 和 WebSocket Server: Coco3.1 下载或 Clone 项目
cd /software
source /software/py3/bin/activate
git clone https://github.com/jumpserver/coco.git && cd coco && git checkout master
echo "source /software/py3/bin/activate" > /software/coco/.env  
 
 
首次进入 coco 文件夹会有提示，按 y 即可
# Are you sure you want to allow this? (y/N) y
3.2 安装依赖
cd /software/coco/requirements
yum -y  install $(cat rpm_requirements.txt)
pip install -r requirements.txt -i https://pypi.python.org/simple
 
3.3 修改配置文件并运行
cd /software/coco
cp conf_example.py conf.py  
vim conf.py
注意: 配置文件是 Python 格式，不要用 TAB，而要用空格
 
 
 
./cocod start  # 后台运行使用 -d 参数./cocod start -d
# 新版本更新了运行脚本，使用方式./cocod start|stop|status|restart  后台运行请添加 -d 参数
 
四. 安装 Web Terminal 前端: Luna4.1 解压 Luna
cd /software
wget https://github.com/jumpserver/luna/releases/download/1.4.1/luna.tar.gz
tar xvf luna.tar.gz
chown -R root:root luna
 
五. 安装 Windows 支持组件(如果不需要管理 windows 资产,可以直接跳过这一步) 
$ rpm --import http://li.nux.ro/download/nux/RPM-GPG-KEY-nux.ro
$ rpm -Uvh http://li.nux.ro/download/nux/dextop/el7/x86_64/nux-dextop-release-0-5.el7.nux.noarch.rpm
$ yum -y localinstall --nogpgcheck https://download1.rpmfusion.org/free/el/rpmfusion-free-release-7.noarch.rpm https://download1.rpmfusion.org/nonfree/el/rpmfusion-nonfree-release-7.noarch.rpm
 
$ yum install -y java-1.8.0-openjdk libtool
$ yum install -y cairo-devel libjpeg-turbo-devel libpng-devel uuid-devel
$ yum install -y ffmpeg-devel freerdp-devel pango-devel libssh2-devel libtelnet-devel libvncserver-devel pulseaudio-libs-devel openssl-devel libvorbis-devel libwebp-devel ghostscript
 
$ mkdir /usr/local/lib/freerdp/
$ ln -s /usr/local/lib/freerdp /usr/lib64/freerdp
 
5.2 编译安装 guacamole 服务
 
cd /software
cd /software/docker-guacamole/
tar -zxvf guacamole-server-0.9.14.tar.gz
autoreconf -fi
./configure --with-init-dir=/etc/init.d
make && make install
cd ..
rm -rf guacamole-server-0.9.14
ldconfig
 
 
mkdir -p /software/config/guacamole /software/config/guacamole/lib /software/config/guacamole/extensions  # 创建 guacamole 目录
$ cp /software/docker-guacamole/guacamole-auth-jumpserver-0.9.14.jar /config/guacamole/extensions/guacamole-auth-jumpserver-0.9.14.jar
$ cp /software/docker-guacamole/root/app/guacamole/guacamole.properties /config/guacamole/  # guacamole 配置文件
 
$ cd /software/config
$ wget http://mirror.bit.edu.cn/apache/tomcat/tomcat-8/v8.5.35/bin/apache-tomcat-8.5.35.tar.gz
$ tar xf apache-tomcat-8.5.35.tar.gz
$ rm -rf apache-tomcat-8.5.35.tar.gz
$ mv apache-tomcat-8.5.35 tomcat8
$ rm -rf /config/tomcat8/webapps/*
$ cp /software/docker-guacamole/guacamole-0.9.14.war /software/config/tomcat8/webapps/ROOT.war  # guacamole client
$ sed -i 's/Connector port="8080"/Connector port="8081"/g' `grep 'Connector port="8080"' -rl /software/config/tomcat8/conf/server.xml`  # 修改默认端口为 8081
$ sed -i 's/FINE/WARNING/g' `grep 'FINE' -rl /software/config/tomcat8/conf/logging.properties`  # 修改 log 等级为 WARNING
 
$ cd /software/config
$ wget https://github.com/ibuler/ssh-forward/releases/download/v0.0.5/linux-amd64.tar.gz
$ tar xf linux-amd64.tar.gz -C /bin/
$ chmod +x /bin/ssh-forward
 
 
5.4 配置环境变量
$ export JUMPSERVER_SERVER=http://127.0.0.1:8080  # http://127.0.0.1:8080 指 jumpserver 访问地址
$ echo "export JUMPSERVER_SERVER=http://127.0.0.1:8080" >> ~/.bashrc
$ export JUMPSERVER_KEY_DIR=/software/config/guacamole/keys
$ echo "export JUMPSERVER_KEY_DIR=/software/config/guacamole/keys" >> ~/.bashrc
$ export GUACAMOLE_HOME=/software/config/guacamole
$ echo "export GUACAMOLE_HOME=/software/config/guacamole" >> ~/.bashrc
 
 
 
 
5.5 启动 Guacamole
$ /etc/init.d/guacd start
$ sh /software/config/tomcat8/bin/startup.sh
 
六. 配置 Nginx 整合各组件$ yum -y install nginx
 
$ vi /etc/nginx/nginx.conf
... 原内容include /etc/nginx/conf.d/*.conf;
# 注释掉整个server {}# server {
    # listen       80 default_server;
    # listen       [::]:80 default_server;
    # server_name  _;
    # root         /usr/share/nginx/html;
 
    # Load configuration files for the default server block.
    # include /etc/nginx/default.d/*.conf;
 
    # location / {
    # }
 
    # error_page 404 /404.html;
        # location = /40x.html {
    # }
 
    # error_page 500 502 503 504 /50x.html;
        # location = /50x.html {
    # }# }... 原内容
6.2 准备配置文件 修改 /etc/nginx/conf.d/jumpserver.conf
$ vi /etc/nginx/conf.d/jumpserver.conf# 注意注释 nginx.conf 里面的 server {} 内容 ,CentOS 6 需要修改文件 /etc/nginx/cond.f/default.conf
 
server {
    listen 80;  # 代理端口,以后将通过此端口进行访问,不再通过8080端口
    server_name demo.jumpserver.org;  # 修改成你的域名
 
    client_max_body_size 100m;  # 录像及文件上传大小限制
 
    location /luna/ {
        try_files $uri / /index.html;
        alias /software/luna/;  # luna 路径,如果修改安装目录,此处需要修改
    }
 
    location /media/ {
        add_header Content-Encoding gzip;
        root /software/jumpserver/data/;  # 录像位置,如果修改安装目录,此处需要修改
    }
 
    location /static/ {
        root /software/jumpserver/data/;  # 静态资源,如果修改安装目录,此处需要修改
    }
 
    location /socket.io/ {
        proxy_pass       http://localhost:5000/socket.io/;  # 如果coco安装在别的服务器,请填写它的ip
        proxy_buffering off;
        proxy_http_version 1.1;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection "upgrade";
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header Host $host;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        access_log off;
    }
 
    location /coco/ {
        proxy_pass       http://localhost:5000/coco/;  # 如果coco安装在别的服务器,请填写它的ip
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header Host $host;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        access_log off;
    }
 
    location /guacamole/ {
        proxy_pass       http://localhost:8081/;  # 如果guacamole安装在别的服务器,请填写它的ip
        proxy_buffering off;
        proxy_http_version 1.1;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection $http_connection;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header Host $host;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        access_log off;
    }
 
    location / {
        proxy_pass http://localhost:8080;  # 如果jumpserver安装在别的服务器,请填写它的ip
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header Host $host;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
    }}
 
6.3 运行 Nginx
nginx -t   # 确保配置没有问题, 有问题请先解决
# CentOS 7
$ systemctl start nginx
$ systemctl enable nginx
 
# CentOS 6
$ service nginx start
$ chkconfig nginx on
 
 
6.4 开始使用 Jumpserver
检查应用是否已经正常运行
服务全部启动后,访问http://49.4.81.172:8888,访问nginx代理的端口,不要再通过8080端口访问
默认账号: admin 密码: admin
如果部署过程中没有接受应用的注册,需要到Jumpserver 会话管理-终端管理 接受 Coco Guacamole 等应用的注册。
 
 
 
 
测试连接
如果登录客户端是 macOS 或 Linux ,登录语法如下
$ ssh -p2222 admin@49.4.81.172
$ sftp -P2222 admin@49.4.81.172
密码: admin
 
 
如果登录客户端是 Windows ,Xshell Terminal 登录语法如下
$ ssh admin@49.4.81.172 2222
$ sftp admin@49.4.81.172 2222
密码: admin
如果能登陆代表部署成功
# sftp默认上传的位置在资产的 /tmp 目录下# windows拖拽上传的位置在资产的 Guacamole RDP上的 G 目录下
 
 
 