How to set up MPPS V16.1.02 ECU chip tuning tool

MPPS ECU chip tuning tool has recently been updated to the latest V16.1.02. The MPPS V.16.1.02 features:

1. Recalculation of checksum

2. Read / write flash

If you already have MPPS interface and would like to update your MPPS software to the latest version, please strictly follow the below steps:

MPPS V16.1.02 O/S Requirements:

Windows XP sp2

Where to get MPPS V16.1.02 software:

Contact your seller, or eobd2.fr customer service and they will send you the software.

MPPS V16.1.02 set up guide:

1) Open MPPS document and copy and paste MPPS.exe file to the desktop.

2) Connect MPPS interface to the laptop and select “Install from a list or specific location” when the laptop prompts “Found New Hardware Wizard” screen and then click “Next”.

3) Install the software on C://MPPS//Device Driver; otherwise, the software would not work properly.

4) Open” Computer Management” and make sure there is a “Amt Flash” file in it.

5) Open MPPS driver shortcut on the desktop. If the software opens smoothly, it means the software is installed successfully.

6) Select car make, model and its ECU type.

7) Click Ecu Id (F1).

8) Select Write (F3), and then the ECU programming process will start.