uboot中env实现

通过搜素比对字符串保存env。

所有的env都保存在一起,每个环境变量字段都以“\0\0”结束,最后一个命令字段以“\0\0\0”结束。

每次uboot启动时,先读出环境变量。当设置新数据时,遍历整个env,确认是否有重复的,

有重复的删除掉,并把新数据设置到环境变量最后。

只有当运行saveenv时才把数据保存到硬件存储设备中。

-----------------------------------------------------------------------------------------------------------

定义于include/environment.h

102 typedef struct environment_s {
103     uint32_t    crc;        /* CRC32 over data bytes    */
104 #ifdef CFG_REDUNDAND_ENVIRONMENT
105     unsigned char   flags;      /* active/obsolete flags    */
106 #endif
107     unsigned char   data[ENV_SIZE]; /* Environment data     */
108 } env_t;

common/env_common.c中存储默认环境变量:

54 /************************************************************************
 55  * Default settings to be used when no valid environment is found
 56  */
 57 #define XMK_STR(x)  #x
 58 #define MK_STR(x)   XMK_STR(x)
 59
 60 uchar default_environment[] = {
 61 #ifdef  CONFIG_BOOTARGS
 62     "bootargs=" CONFIG_BOOTARGS         "\0"
 63 #endif
 64 #ifdef  CONFIG_BOOTCOMMAND
 65     "bootcmd="  CONFIG_BOOTCOMMAND      "\0"
 66 #endif
 67 #ifdef  CONFIG_RAMBOOTCOMMAND
 68     "ramboot="  CONFIG_RAMBOOTCOMMAND       "\0"
 69 #endif
 70 #ifdef  CONFIG_NFSBOOTCOMMAND
 71     "nfsboot="  CONFIG_NFSBOOTCOMMAND       "\0"
 72 #endif
 73 #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
 74     "bootdelay="    MK_STR(CONFIG_BOOTDELAY)    "\0"
 75 #endif
 76 #if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0)
 77     "baudrate=" MK_STR(CONFIG_BAUDRATE)     "\0"
 78 #endif
 79 #ifdef  CONFIG_LOADS_ECHO
 80     "loads_echo="   MK_STR(CONFIG_LOADS_ECHO)   "\0"
 81 #endif
 82 #ifdef  CONFIG_ETHADDR
 83     "ethaddr="  MK_STR(CONFIG_ETHADDR)      "\0"
 84 #endif
 85 #ifdef  CONFIG_ETH1ADDR
86     "eth1addr=" MK_STR(CONFIG_ETH1ADDR)     "\0"
 87 #endif
 88 #ifdef  CONFIG_ETH2ADDR
 89     "eth2addr=" MK_STR(CONFIG_ETH2ADDR)     "\0"
 90 #endif
 91 #ifdef  CONFIG_ETH3ADDR
 92     "eth3addr=" MK_STR(CONFIG_ETH3ADDR)     "\0"
 93 #endif
 94 #ifdef  CONFIG_IPADDR
 95     "ipaddr="   MK_STR(CONFIG_IPADDR)       "\0"
 96 #endif
 97 #ifdef  CONFIG_SERVERIP
 98     "serverip=" MK_STR(CONFIG_SERVERIP)     "\0"
 99 #endif
100 #ifdef  CFG_AUTOLOAD
101     "autoload=" CFG_AUTOLOAD            "\0"
102 #endif
103 #ifdef  CONFIG_PREBOOT
104     "preboot="  CONFIG_PREBOOT          "\0"
105 #endif
106 #ifdef  CONFIG_ROOTPATH
107     "rootpath=" MK_STR(CONFIG_ROOTPATH)     "\0"
108 #endif
109 #ifdef  CONFIG_GATEWAYIP
110     "gatewayip="    MK_STR(CONFIG_GATEWAYIP)    "\0"
111 #endif
112 #ifdef  CONFIG_NETMASK
113     "netmask="  MK_STR(CONFIG_NETMASK)      "\0"
114 #endif
115 #ifdef  CONFIG_HOSTNAME
116     "hostname=" MK_STR(CONFIG_HOSTNAME)     "\0"
117 #endif
118 #ifdef  CONFIG_BOOTFILE
119     "bootfile=" MK_STR(CONFIG_BOOTFILE)     "\0"
120 #endif
121 #ifdef  CONFIG_LOADADDR
122     "loadaddr=" MK_STR(CONFIG_LOADADDR)     "\0"
123 #endif
124 #ifdef  CONFIG_CLOCKS_IN_MHZ
125     "clocks_in_mhz=1\0"
126 #endif
127 #if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0)
128     "pcidelay=" MK_STR(CONFIG_PCI_BOOTDELAY)    "\0"
129 #endif
130 #ifdef  CONFIG_EXTRA_ENV_SETTINGS
131     CONFIG_EXTRA_ENV_SETTINGS
132 #endif
133     "\0"
134 };
宏定义位于配置文件中,include/configs/at91sam9g10ek

153 #define CFG_USE_NORFLASH        1
154 #define PHYS_FLASH_1            0x10000000
155 #define PHYS_FLASH_SIZE         0x800000    /* 8 MB main flash */
156 #define CFG_FLASH_BASE          PHYS_FLASH_1

 225 #if CFG_USE_NORFLASH             
226 /* u-boot + env + linux in norflash */
227 #define CFG_ENV_IS_IN_FLASH 1
228 #define CFG_ENV_OFFSET      0x38000
229 #define CFG_ENV_ADDR        (PHYS_FLASH_1 + CFG_ENV_OFFSET)
230 #define CFG_ENV_OFFSET_REDUND   0x40000
231 #define CFG_ENV_SIZE        0x8000
232 #define CONFIG_BOOTCOMMAND  "cp.b 0x10100000 0x20008000 0x200000; bootm 0x20008000"
233 #if 0
234 #define CONFIG_BOOTARGS     "console=ttyS0,115200 "         \
235                     "root=/dev/mtdblock0 "          \
236                 "rootfstype=jffs2 "         \
237                 "init=linuxrc "             \
238                 "mem=64M "              \
239                 "ip=192.168.0.100:::::eth1:off "        \
240                 "ip=192.168.0.110:::::eth0:off"
241 #else
242 #define CONFIG_BOOTARGS     "console=ttyS0,115200 root=/dev/mtdblock0 rootfstype=jffs2 init=linuxrc mem=64M ip=192.168.0.100:::::eth1:off ip=192.168.0.110:::::eth0:off panic=10"
243 #endif
276 #define CFG_MALLOC_LEN      ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
277 #define CFG_GBL_DATA_SIZE   128 /* 128 bytes for initial data */
278
279 #define CONFIG_STACKSIZE    (32*1024)   /* regular stack */
280 #define CONFIG_STACKSIZE_IRQ    (32*1024)   /* regular stack */
281 #define CONFIG_STACKSIZE_FIQ    (32*1024)   /* regular stack */

------------------------------------------------------------------------------------------------------------------------

env命令--common/cmd_nvedit.c

common/env_common.c供uboot调用的通用函数接口,隐藏了env的不同实现方式。

common/env_flash.c,env存储在flash的实现。

env_init()完成环境变量初始化工作,不同存储介质不同。
初始化流程
start.s           _start

lib_arm/board.c      start_armboot()  ----env_init()

                      ----env_relocate()

common/main.c      main_loop()

 

common/env_flash.c

 68 #else /* ! ENV_IS_EMBEDDED */
 69
 70 env_t *env_ptr = (env_t *)CFG_ENV_ADDR;
 71 #ifdef CMD_SAVEENV
 72 static env_t *flash_addr = (env_t *)CFG_ENV_ADDR;
 73 #endif
 74
 75 #endif /* ENV_IS_EMBEDDED */

250 int  env_init(void)
251 {
252     if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) {
253         gd->env_addr  = (ulong)&(env_ptr->data);
254         gd->env_valid = 1;
255         return(0);
256     }
257
258     gd->env_addr  = (ulong)&default_environment[0];
259     gd->env_valid = 0;
260     return (0);
261 }

common/env_common.c

224 void env_relocate (void)
225 {
226     DEBUGF ("%s[%d] offset = 0x%lx\n", __FUNCTION__,__LINE__,
227         gd->reloc_off);
228
229 #ifdef CONFIG_AMIGAONEG3SE
230     enable_nvram();
231 #endif
232
233 #ifdef ENV_IS_EMBEDDED
234     /*
235      * The environment buffer is embedded with the text segment,
236      * just relocate the environment pointer
237      */
238     env_ptr = (env_t *)((ulong)env_ptr + gd->reloc_off);
239     DEBUGF ("%s[%d] embedded ENV at %p\n", __FUNCTION__,__LINE__,env_ptr);
240 #else
241     /*
242      * We must allocate a buffer for the environment
243      */
244     env_ptr = (env_t *)malloc (CFG_ENV_SIZE);
245     DEBUGF ("%s[%d] malloced ENV at %p\n", __FUNCTION__,__LINE__,env_ptr);
246 #endif
247
248     if (gd->env_valid == 0) {
249 #if defined(CONFIG_GTH) || defined(CFG_ENV_IS_NOWHERE)  /* Environment not changable */
250         puts ("Using default environment\n\n");
251 #else
252         puts ("*** Warning - bad CRC, using default environment\n\n");
253         show_boot_progress (-60);
254 #endif
255         set_default_env();
256     }
257     else {
258         env_relocate_spec ();
259     }
260     gd->env_addr = (ulong)&(env_ptr->data);
261
262 #ifdef CONFIG_AMIGAONEG3SE
263     disable_nvram();
264 #endif
265 }
注:ENV_IS_EMBEDDED没有定义,其含义为:
The environment buffer is embedded with the text segment, just relocate the environment pointer


posted @ 2015-09-21 00:16  yuxi_o  阅读(1677)  评论(0编辑  收藏  举报