DUT-图像简易灰度

模板-V1

模型功能

1. 输入视频总线
2. 输出视频总线
3. 将RGB24数据转化为灰度数据

模型框图

控制模型

实现步骤

源码编写

• 未经仿真的原始代码
  `timescale 1ns / 1ps
  /*

*/
//////////////////////////////////////////////////////////////////////////////////
// Company: 
// Engineer: 
// 
// Create Date: 2024/04/05 13:24:26
// Design Name: 
// Module Name: video_gray_cacu
// Project Name: 
// Target Devices: 
// Tool Versions: 
// Description: 
// 
// Dependencies: 
// 
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//          FUNC1: output gray
//////////////////////////////////////////////////////////////////////////////////
module video_gray_cacu #(
    //mode
    parameter MD_SIM_ABLE = 0,
    //number
    
    //width
    parameter WD_DATA = 24,
    parameter WD_BYTE = 8,
    parameter WD_ERR_INFO = 4
   )(
    //system signals
    input           i_sys_clk   ,  
    input           i_sys_resetn,  
    //video src
    input                       s_video_src_fsync,
    input                       s_video_src_vsync,
    input                       s_video_src_hsync,
    input                       s_video_src_psync,
    input [WD_DATA-1:0]         s_video_src_vdata,
    //video dst
    output                       m_video_dst_fsync,
    output                       m_video_dst_vsync,
    output                       m_video_dst_hsync,
    output                       m_video_dst_psync,
    output [WD_DATA-1:0]         m_video_dst_vdata,
    
    //error info feedback
    output   [WD_ERR_INFO-1:0]  m_err_video_info1
);
//========================================================
//function to math and logic

//========================================================
//localparam to converation and calculate
localparam NB_CACU_STEP = 2;
//========================================================
//register and wire to time sequence and combine
// ----------------------------------------------------------
// FUNC1: output gray
reg  [NB_CACU_STEP-1:0]   r_video_dst_fsync_dn = 0;
reg  [NB_CACU_STEP-1:0]   r_video_dst_vsync_dn = 0;
reg  [NB_CACU_STEP-1:0]   r_video_dst_hsync_dn = 0;
reg  [NB_CACU_STEP-1:0]   r_video_dst_psync_dn = 0;
reg  [WD_DATA-1:0]        r_video_dst_vdata = 0;
assign m_video_dst_fsync = r_video_dst_fsync_dn[NB_CACU_STEP-1];
assign m_video_dst_vsync = r_video_dst_vsync_dn[NB_CACU_STEP-1];
assign m_video_dst_hsync = r_video_dst_hsync_dn[NB_CACU_STEP-1];
assign m_video_dst_psync = r_video_dst_psync_dn[NB_CACU_STEP-1];
assign m_video_dst_vdata = r_video_dst_vdata;
//cacu-1
reg  [WD_DATA+1-1:0]      r_video_R_add_B;
reg  [WD_DATA+1-1:0]      r_video_G_mul_2;
//cacu-2
wire [WD_DATA+2-1:0]      w_video_R_add_B_add_2G;
//========================================================
//always and assign to drive logic and connect
// ----------------------------------------------------------
// FUNC1: output gray
always@(posedge i_sys_clk)
begin
    if(!i_sys_resetn) //system reset
    begin
        r_video_R_add_B <= 1'b0; //
        r_video_G_mul_2 <= 1'b0;
    end
    else if(1) //
    begin
        r_video_R_add_B <=  s_video_src_vdata[WD_BYTE*1-1:WD_BYTE*0]  //R
                            + s_video_src_vdata[WD_BYTE*3-1:WD_BYTE*2]; //B  //
        r_video_G_mul_2 <= {s_video_src_vdata[WD_BYTE*2-1:WD_BYTE*1],1'b0};
    end
end
assign w_video_R_add_B_add_2G = r_video_R_add_B + r_video_G_mul_2;
always@(posedge i_sys_clk)
begin
    if(!i_sys_resetn) //system reset
    begin
        r_video_dst_fsync_dn <= 1'b0;
        r_video_dst_vsync_dn <= 1'b0;
        r_video_dst_hsync_dn <= 1'b0;
        r_video_dst_psync_dn <= 1'b0;
        r_video_dst_vdata <= 1'b0;//
    end
    else if(1) //
    begin
        r_video_dst_fsync_dn <= {r_video_dst_fsync_dn[NB_CACU_STEP-2:0],s_video_src_fsync};
        r_video_dst_vsync_dn <= {r_video_dst_vsync_dn[NB_CACU_STEP-2:0],s_video_src_vsync};
        r_video_dst_hsync_dn <= {r_video_dst_hsync_dn[NB_CACU_STEP-2:0],s_video_src_hsync};
        r_video_dst_psync_dn <= {r_video_dst_psync_dn[NB_CACU_STEP-2:0],s_video_src_psync};
        r_video_dst_vdata <={(3){w_video_R_add_B_add_2G[WD_BYTE+2-1:2]}};//  //
    end
end
//========================================================
//module and task to build part of system

//========================================================
//expand and plug-in part with version 

//========================================================
//ila and vio to debug and monitor

endmodule
              
/* end verilog

*/

video总线描述

1. 使用自定义video总线，包括帧同步、垂直同步、水平同步、像素点同步和数据五个信号
2. 总线的时序图如下：
   

获取测试端口

测试端口	测试目标
复位测试	仿真无非0和1的值进入初始化即可
video输入	总线的数据同步格式正常；
video输出	总线的数据和输入的理论计算结果一致
报错信息	无

最终效果

封装模型

调用接口

调用参数配置

• 只是演示仿真仿真系统如何搭建，所以DUT可以比较简单，只需要引入基本的总线概念即可