记录在误删/var 文件夹之后，系统启动不能进入桌面系统的过程

1、首先进入命令行，

使用有线连接互联网

apt-get update

apt-get -f install 

apt-get install ubuntu-desktop 遇到问题，

问题:

我无法安装任何软件包，因为出现这里错误：

 

installArchives() failed: E: Cannot get debconf version. Is debconf installed?


debconf: apt-extracttemplates failed: No such file or directory


E: Cannot get debconf version. Is debconf installed?


debconf: apt-extracttemplates failed: No such file or directory


E: Cannot get debconf version. Is debconf installed?


debconf: apt-extracttemplates failed: No such file or directory


E: Cannot get debconf version. Is debconf installed?


debconf: apt-extracttemplates failed: No such file or directory


dpkg: regarding.. ./libgcc1_1%3a4.7.2-2ubuntu1_amd64.deb containing libgcc1:amd64, pre-dependency problem:


 libgcc1 pre-depends on multiarch-support


 multiarch-support is unpacked, but has never been configured.



dpkg: error processing/var/cache/apt/archives/libgcc1_1%3a4.7.2-2ubuntu1_amd64.deb (--unpack):


 pre-dependency problem - not installing libgcc1:amd64


Errors were encountered while processing:


/var/cache/apt/archives/libgcc1_1%3a4.7.2-2ubuntu1_amd64.deb


Error in function: 


dpkg: dependency problems prevent configuration of libc6:amd64:


 libc6:amd64 depends on libgcc1; however:


 Package libgcc1 is not installed.


 libc6:amd64 depends on tzdata; however:


 Package tzdata is not installed.



dpkg: error processing libc6:amd64 (--configure):


 dependency problems - leaving unconfigured


dpkg: dependency problems prevent configuration of multiarch-support:


 multiarch-support depends on libc6 (>= 2.3.6-2); however:


 Package libc6:amd64 is not configured yet.



dpkg: error processing multiarch-support (--configure):


 dependency problems - leaving unconfigured

　　

回答 1:

这里是这个问题的解决方案，超级容易

你必须直接使用dpkg来解决这个问题。

"又来了"

软件包 multiarch-support is unpacked, but has never been configured 这意味着包不久将配置，但还没有配置。

什么时候状态 unpacked 还没有安装，因此包 libgcc1 无法安装，因为依赖项还没有安装，并且无法安装在 multiarch-support 之前。

我们必须强制multiarch支持安装的状态来完成这个操作。

nano/var/lib/dpkg/status

　　查找以 Package: 开头的行，如下所示：

Package: multiarch-support


Status: install ok unpacked

　　

你必须将 unpacked 更改为 installed

现在尝试：

 

sudo dpkg --configure --pending


sudo apt-get install --reinstall multiarch-support libgcc1 debconf