java.util.logging.Logger基础教程
从JDK1.4开始即引入与日志相关的类java.util.logging.Logger，但由于Log4J的存在，一直未能广泛使用。综合网上各类说法，大致认为：
（1）Logger：适用于小型系统，当日志量过大时性能有待提升。好处在于JDK集成了此类，无需引入新包。且性能也在逐步改善当中，我认为一般而言，使用Logger即可。
（2）Log4J：并发性较好，性能较强，适用于大型系统。
本文介绍java.util.logging.Logger的详细用法。
1、基本概念
Logger中有2个比较重要的概念，分别是记录器(Logger)与处理器(Handler)，二者分别完成以下功能：
（1）Logger：记录日志，设置日志级别等。
（2）Handler：确定输出位置等。
2、Logger相关
（1）一般通过getLogger来获取对象，而不能通过构造函数直接构造。
static Logger getLogger(String name, String resourceBundleName)
- SEVERE（最高值）
- WARNING
- INFO
- CONFIG
- FINE
- FINER
- FINEST（最低值）
public static void main(String[] args) {
final Logger logger = Logger.getLogger("org.jediael.crawl.MyCrawler");
logger.info("Begin Crawling, Good Luck!");
//为每一个种子url，启动一个线程
Thread t = new Thread(new Runnable() {
@Override
public void run() {
logger.info(Thread.currentThread()+" start!!");控制台输出如下：信息: Begin Crawling, Good Luck!
六月 18, 2014 2:49:35 下午 org.jediael.crawl.MyCrawler$2 run
信息: Thread[Thread-1,5,main] start!!
六月 18, 2014 2:49:35 下午 org.jediael.crawl.MyCrawler$2 run
信息: Thread[Thread-4,5,main] start!!
六月 18, 2014 2:49:35 下午 org.jediael.crawl.MyCrawler$2 run
信息: Thread[Thread-3,5,main] start!!
六月 18, 2014 2:49:35 下午 org.jediael.crawl.MyCrawler$2 run
信息: Thread[Thread-2,5,main] start!!
public static void main(String[] args) {
final Logger logger = Logger.getLogger("org.jediael.crawl.MyCrawler");
logger.setLevel(Level.WARNING);
logger.info("Begin Crawling, Good Luck!");此时控制台无输出 final Logger logger = Logger.getLogger("org.jediael.crawl.MyCrawler");
logger.setLevel(Level.INFO);
FileHandler fileHandler = new FileHandler("d:\\1.log");
fileHandler.setLevel(Level.INFO);
logger.addHandler(fileHandler);
logger.info("Begin Crawling, Good Luck!");此时日志同时输出至控制台及文件中。注意，未指定文件格式的情况下，日志输出格式为XML。
<!DOCTYPE log SYSTEM "logger.dtd">
<log>
<record>
<date>2014-06-18T15:04:44</date>
<millis>1403075084407</millis>
<sequence>0</sequence>
<logger>org.jediael.crawl.MyCrawler</logger>
<level>INFO</level>
<class>org.jediael.crawl.MyCrawler</class>
<method>main</method>
<thread>1</thread>
<message>Begin Crawling, Good Luck!</message>
</record>
<record>
<date>2014-06-18T15:04:44</date>
<millis>1403075084471</millis>
<sequence>1</sequence>
logger.setUseParentHandlers(false);
Logger objects may be obtained by calls on one of the getLogger factory methods. These will either create a new Logger or return a suitable
existing Logger. It is important to note that the Logger returned by one of the getLogger factory
methods may be garbage collected at any time if a strong reference to the Logger is not kept.
Logging messages will be forwarded to registered Handler objects, which can forward the messages to a variety of destinations, including consoles, files, OS logs, etc.
Each Logger keeps track of a "parent" Logger, which is its nearest existing ancestor in the Logger namespace.
Each Logger has a "Level" associated with it. This reflects a minimum Level that this logger cares about. If
a Logger's level is set to null, then its effective level is inherited from its parent, which may in turn obtain
it recursively from its parent, and so on up the tree.
The log level can be configured based on the properties from the logging configuration file, as described in the description of
the LogManager class. However it may also be dynamically changed by calls on the Logger.setLevel method. If a logger's level is changed
the change may also affect child loggers, since any child logger that has null as
its level will inherit its effective level from its parent.
On each logging call the Logger initially performs a cheap check of the request level (e.g., SEVERE or FINE) against the effective log level of the logger. If the request level is lower than the log level, the logging call returns immediately.
After passing this initial (cheap) test, the Logger will allocate a LogRecord to describe the logging message. It will then call a Filter (if present) to do a more detailed check on whether the record should be published. If that passes it will then publish the LogRecord to its output Handlers. By default, loggers also publish to their parent's Handlers, recursively up the tree.
Each Logger may have a ResourceBundle name associated with it. The named bundle will be used for localizing logging messages. If a Logger does not have its own ResourceBundle name, then it will inherit the ResourceBundle name from its parent, recursively up the tree.
Most of the logger output methods take a "msg" argument. This msg argument may be either a raw value or a localization key. During formatting, if the logger has (or inherits) a localization ResourceBundle and if the ResourceBundle has a mapping for the msg string, then the msg string is replaced by the localized value. Otherwise the original msg string is used. Typically, formatters use java.text.MessageFormat style formatting to format parameters, so for example a format string "{0} {1}" would format two parameters as strings.
When mapping ResourceBundle names to ResourceBundles, the Logger will first try to use the Thread's ContextClassLoader. If that is null it will try the SystemClassLoader instead. As a temporary transition feature in the initial implementation, if the Logger is unable to locate a ResourceBundle from the ContextClassLoader or SystemClassLoader the Logger will also search up the class stack and use successive calling ClassLoaders to try to locate a ResourceBundle. (This call stack search is to allow containers to transition to using ContextClassLoaders and is likely to be removed in future versions.)
Formatting (including localization) is the responsibility of the output Handler, which will typically call a Formatter.
Note that formatting need not occur synchronously. It may be delayed until a LogRecord is actually written to an external sink.
The logging methods are grouped in five main categories:
-
There are a set of "log" methods that take a log level, a message string, and optionally some parameters to the message string.
-
There are a set of "logp" methods (for "log precise") that are like the "log" methods, but also take an explicit source class name and method name.
-
There are a set of "logrb" method (for "log with resource bundle") that are like the "logp" method, but also take an explicit resource bundle name for use in localizing the log message.
-
There are convenience methods for tracing method entries (the "entering" methods), method returns (the "exiting" methods) and throwing exceptions (the "throwing" methods).
-
Finally, there are a set of convenience methods for use in the very simplest cases, when a developer simply wants to log a simple string at a given log level. These methods are named after the standard Level names ("severe", "warning", "info", etc.) and take a single argument, a message string.
For the methods that do not take an explicit source name and method name, the Logging framework will make a "best effort" to determine which class and method called into the logging method. However, it is important to realize that this automatically inferred information may only be approximate (or may even be quite wrong!). Virtual machines are allowed to do extensive optimizations when JITing and may entirely remove stack frames, making it impossible to reliably locate the calling class and method.
All methods on Logger are multi-thread safe.
Subclassing Information: Note that a LogManager class may provide its own implementation of named Loggers for any point in the namespace. Therefore, any subclasses of Logger (unless they are implemented in conjunction with a new LogManager class) should take care to obtain a Logger instance from the LogManager class and should delegate operations such as "isLoggable" and "log(LogRecord)" to that instance. Note that in order to intercept all logging output, subclasses need only override the log(LogRecord) method. All the other logging methods are implemented as calls on this log(LogRecord) method.
