OK6410 & QT (1):编译TSLIB

【参考】http://www.lijingquan.net/2016/07/08/build-kernel-busybox-qt5-6-tslib-imx28/

HOST:ubuntu 12.04LTS, 64bit, Core i7-4790K,gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)

CROSS-TOOLCHAIN:gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67)

SRC:

tslib-1.4.tar.gz 

qt-everywhere-opensource-src-5.6.1.tar.gz 

qt-opensource-linux-x64-5.6.1.run

虽说网上已经有好多资源了,但是遇到这样或那样的问题,有些问题花了一些时间才搞的定,其实冷静下来,认真思考,就可以节约很多时间了。

〇、32bit compatible

     因为交叉编译工具都是32位,所以需要使用32位兼容库:

      sudo apt-get install ia32-libs

     另外,需要注意5.6.1linux开发软件包只有64位的,用32位的系统是不行的。

一、tslib

       tslib是触屏相关的库,既然是做UI,还是建议把这个带上,以免回头重编qt。

       tslib的编译比较简单,注意需要GNU Autotools三大件:

  sudo apt-get install automake autogen autoconf libtool

     1)解压tslib-1.4.tar.gz;

      tar zxvf tslib-1.4.tar.gz

      cd tslib/

acinclude.m4  autogen-clean.sh  ChangeLog     COPYING  etc      m4           NEWS     README  tests
AUTHORS       autogen.sh        configure.ac  CVS      INSTALL  Makefile.am  plugins  src     tslib.pc.in

  ./autogen.sh

acinclude.m4  autogen-clean.sh  ChangeLog     config.sub    COPYING  etc         ltmain.sh    Makefile.in  plugins  tests
aclocal.m4    autogen.sh        config.guess  configure     CVS      INSTALL     m4           missing      README   tslib.pc.in
AUTHORS       autom4te.cache    config.h.in   configure.ac  depcomp  install-sh  Makefile.am  NEWS         src

  ./configure --host=arm-linux ac_cv_func_malloc_0_nonnull=yes --cache-file=arm-linux.cache -prefix=/opt/tslib

acinclude.m4     autogen-clean.sh  config.guess  config.status  COPYING  INSTALL     m4           missing  src           tslib.pc.in
aclocal.m4       autogen.sh        config.h      config.sub     CVS      install-sh  Makefile     NEWS     stamp-h1
arm-linux.cache  autom4te.cache    config.h.in   configure      depcomp  libtool     Makefile.am  plugins  tests
AUTHORS          ChangeLog         config.log    configure.ac   etc      ltmain.sh   Makefile.in  README   tslib-0.0.pc

  之后,make && sudo make install 就可以了。

     cd /opt/tslib/lib/

libts-0.0.so.0  libts-0.0.so.0.1.1  libts.la  libts.so  pkgconfig  ts

  查看一下是否编译成功了?

  file libts-0.0.so.0.1.1

libts-0.0.so.0.1.1: ELF 32-bit LSB shared object, ARM, version 1 (SYSV), dynamically linked, not stripped

  希望能支持鼠标输入功能,取消第2行的注释:

  vim /opt/tslib/etc/vim ts.conf

# Uncomment if you wish to use the linux input layer event interface
module_raw input

# Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d
# module_raw collie

# Uncomment if you're using a Sharp Zaurus SL-C700/C750/C760/C860
# module_raw corgi

# Uncomment if you're using a device with a UCB1200/1300/1400 TS interface
# module_raw ucb1x00

# Uncomment if you're using an HP iPaq h3600 or similar
# module_raw h3600

# Uncomment if you're using a Hitachi Webpad
# module_raw mk712

# Uncomment if you're using an IBM Arctic II
# module_raw arctic2

module pthres pmin=1
module variance delta=30
module dejitter delta=100
module linear

  

  

 

posted @ 2016-08-18 13:50  still_waters  阅读(254)  评论(0编辑  收藏  举报