【解决办法--实测可行】Partition 1 does not start on physical sector boundary.

新的硬盘使用fdisk进行划分的时候有提示Partition 1 does not start on physical sector boundary.
后面按网上找的办法，在fdisk进行分区的时候，输入u进行更改显示输入的单位，然后再删除分区，再进行添加新的分区就正常了。

转自 https://askubuntu.com/questions/156994/partition-does-not-start-on-physical-sector-boundary

By switching the "u" units. The default sector size will show up when you create the partition. If you are starting to partition a new disk and you get this error, you can.

1. create a partion with the defaut.
2. n,p,1,Enter, Enter
3. Display and get the partition error message. "p".
4. switch units "u"
5. delete the partition. "d"
6. Now create again. this time the defaults will show the correct sector. (in my case it was 1024).

以下是处理的实例：

Command (m for help): p

Disk /dev/sdb: 599.9 GB, 599932844032 bytes
255 heads, 63 sectors/track, 72937 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 262144 bytes / 524288 bytes
Disk identifier: 0x2016bdc5

   Device Boot      Start         End      Blocks   Id  System

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-72937, default 1): 1
Last cylinder, +cylinders or +size{K,M,G} (1-72937, default 72937):
Using default value 72937

Command (m for help): p

Disk /dev/sdb: 599.9 GB, 599932844032 bytes
255 heads, 63 sectors/track, 72937 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 262144 bytes / 524288 bytes
Disk identifier: 0x2016bdc5

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1       72937   585866421   83  Linux
Partition 1 does not start on physical sector boundary.
```

---
==重点这步==<PS:好吧！Markdown格式貌似不支持>
---

Command (m for help): u

Changing display/entry units to sectors

Command (m for help): p

Disk /dev/sdb: 599.9 GB, 599932844032 bytes
255 heads, 63 sectors/track, 72937 cylinders, total 1171743836 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 262144 bytes / 524288 bytes
Disk identifier: 0x2016bdc5

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1              63  1171732904   585866421   83  Linux
Partition 1 does not start on physical sector boundary.

Command (m for help): d
Selected partition 1

Command (m for help): p

Disk /dev/sdb: 599.9 GB, 599932844032 bytes
255 heads, 63 sectors/track, 72937 cylinders, total 1171743836 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 262144 bytes / 524288 bytes
Disk identifier: 0x2016bdc5

   Device Boot      Start         End      Blocks   Id  System

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 8
Value out of range.
Partition number (1-4): 1
First sector (63-1171743835, default 1024):
Using default value 1024
Last sector, +sectors or +size{K,M,G} (1024-1171743835, default 1171743835):
Using default value 1171743835

Command (m for help): p

Disk /dev/sdb: 599.9 GB, 599932844032 bytes
255 heads, 63 sectors/track, 72937 cylinders, total 1171743836 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 262144 bytes / 524288 bytes
Disk identifier: 0x2016bdc5

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            1024  1171743835   585871406   83  Linux

Command (m for help): w
The partition table has been altered!

 

至此，完结。