Slax is a modern, portable, small and fast Linux operating system with a modular approach and outstanding design.
Despite its small size, Slax provides a wide collection of pre-installed software for daily use, including a well organized
graphical user interface and useful recovery tools for system administrators.
The modular approach gives you the ability to include any other software in Slax easily. If you're missing your favourite
text editor, networking tool or game, simply download a module with the software and copy it to Slax, no need to install,
no need to configure.
(slax 是一个精简的linux 系统 ,但是功能比较强大,适合做系统维护)
These steps to install slax from slax.txt :
####################################################
Thank you for using slax!
Steps to make it bootable from your USB device:
1) Extract the contents of ZIP archive to your USB drive.
If you are using Windows, you will get for example E:\slax\
You probably already did this, just make sure you extracted
the archive to your USB drive and not to your local harddisk.
2) Now navigate to directory /slax/boot/ on your USB drive.
In Windows, it will be E:\slax\boot\ for example.
Use explorer or any other file manager for this task.
3) While you're in the boot directory, locate file bootinst.bat
Run it by doubleclicking it. It will setup your USB to boot.
-- That's it. Your USB device is now ready to boot slax.
-- You can safely delete this file (slax.txt), it's not needed.
#######################################################
I install the slax using these steps ,but not successful. I think ,its may something wrong with the booing of USB device .
So, i use the DiskGenius to Write boot enable flag and then follow the above steps . finally ,it worked .
Doing like the following picture :
Good luck to you !!!
Reference: http://www.slax.org/ ,slax.txt
