CE交换机 vxlan（一）

 

 

 

 

[*ZZKK]interface 100GE1/0/58.1 mode l2 
[*ZZKK-100GE1/0/58.1]encapsulation untag
Warning: Exercise caution when configuring an untagged default sub-interface and ensure that no configurations exist on the main interface before you configure an untagged default sub-interface. Otherwise, it will produce unpredictable results.
[*ZZKK-100GE1/0/58.1]quit
[*ZZKK]bridge-domain 100
[*ZZKK-bd100]vxlan vni 33
Info: Please disable dynamic ARP learning when the controller is used to deliver ARP entries.
[*ZZKK-bd100]commit
[~ZZKK-bd100]interface 100GE1/0/58.1 mode l2
[~ZZKK-100GE1/0/58.1]encapsulation untag
[~ZZKK-100GE1/0/58.1]bridge-domain 100
[*ZZKK-100GE1/0/58.1]commit
[~ZZKK-100GE1/0/58.1]interface nve1
Info: Ensure that the IP addresses and MAC addresses of the NVE interfaces on Devices are the same, as they are dual-active gateways using M-LAG.
[*ZZKK-Nve1]source 192.168.117.249
[*ZZKK-Nve1]vni 33 head-end peer-list 10.10.16.81  
[*ZZKK-Nve1]display vxlan vni 33 verbose  
    BD ID                  : 100
    State                  : down
    NVE                    : 77
    Source Address         : 192.168.117.249
    Source IPv6 Address    : -
    UDP Port               : 4789
    BUM Mode               : -
    Group Address          : -
[*ZZKK-Nve1]commit
[~ZZKK-Nve1]
Info: The max number of VTY users is 5, and the number of current VTY users on line is 0.Connection closed by foreign host.
[root@bogon ~]# 
<ZZKK>display bridge-domain      
The total number of bridge-domains is : 1
--------------------------------------------------------------------------------
MAC_LRN: MAC learning;         STAT: Statistics;         SPLIT: Split-horizon;
BC: Broadcast;                 MC: Unknown multicast;    UC: Unknown unicast;
*down: Administratively down;  FWD: Forward;             DSD: Discard;
--------------------------------------------------------------------------------

BDID       State MAC-LRN STAT    BC  MC  UC  SPLIT   Description
--------------------------------------------------------------------------------
100        up    enable  disable FWD FWD FWD disable                                 
<ZZKK>display bridge-domain 100 brief
--------------------------------------------------------------------------------
*down: Administratively down;           U:Up;            D:Down;
--------------------------------------------------------------------------------
       
BDID       State Ports
--------------------------------------------------------------------------------
100        up    100GE1/0/58.1(U)             
<ZZKK>
<ZZKK>display bridge-domain 100 brief verbose
                                      ^
Error: Too many parameters found at '^' position.
<ZZKK>display bridge-domain 100 verbose      
  Bridge-domain ID        : 100
  Description             : 
  State                   : Up
  MAC Learning            : Enable
  Statistics              : Disable
  Broadcast               : Forward
  Unknown-unicast         : Forward
  Unknown-multicast       : Forward
  Split-horizon           : Disable
  Vxlan Vni               : 33
  VSI                     : 
  EVPN                    : 
 
  ----------------
Interface                                State
  100GE1/0/58.1                          up        
<ZZKK>
<ZZKK>display vxlan tunnel 
Number of vxlan tunnel : 1
Tunnel ID   Source                Destination           State  Type     Uptime
-----------------------------------------------------------------------------------
4026531841  192.168.117.249       10.10.16.81           up     static   00:15:42  
<ZZKK>
<ZZKK>display vxlan tunnel 4026531841 verbose
    Tunnel ID              : 4026531841
    Source                 : 192.168.117.249
    Destination            : 10.10.16.81
    State                  : up
    Type                   : static
    Uptime                 : 00:16:26

<ZZKK>
<ZZKK>display vxlan vni 33
VNI            BD-ID            State   
---------------------------------------
33             100              up          
<ZZKK>display vxlan peer 33
                         ^
Error: Too many parameters found at '^' position.
<ZZKK>display vxlan peer vni 33
Number of peers : 1
Vni ID    Source                  Destination            Type      Out Vni ID
-------------------------------------------------------------------------------
33        192.168.117.249         10.10.16.81            static    33         
<ZZKK>
<ZZKK>display bridge-domain 100 statistics

 

 

 

<ZZKK>dis vxlan  tunnel
Number of vxlan tunnel : 1
Tunnel ID   Source                Destination           State  Type     Uptime
-----------------------------------------------------------------------------------
4026531842  192.168.117.249       10.10.16.81           up     static   03:31:08  
<ZZKK>dis vxlan peer
Number of peers : 1
Vni ID    Source                  Destination            Type      Out Vni ID
-------------------------------------------------------------------------------
3300      192.168.117.249         10.10.16.81            static    3300       
<ZZKK>

 

 

 

常用命令总结：

　　bridge-domain bd-id，创建广播域BD，并进入BD视图。

　　description description，配置BD的描述信息。

　　l2 binding vlan vlan-id，将指定VLAN与BD相关联，实现数据报文在BD内进行转发。

　　vxlan vni vni-id，配置BD所对应的VXLAN的VNI.

　　source ip-address，配置VXLAN隧道源端VTEP的IP地址。

　　vni vni-id head-end peer-list ip-address &<1-10>，配置头端复制列表。

　　

　　display bridge-domain [ bd-id [ brief | verbose ] ]，查看BD的配置信息。

　　display vxlan tunnel [ tunnel-id ] [ verbose ]，查看VXLAN隧道的信息。

　　display vxlan vni [ vni-id [ verbose ] ]，查看VNI的VXLAN的配置信息。

　　display vxlan peer [ vni vni-id ]，查看VNI的目的端VTEP的IP地址。

　　display bridge-domain bd-id statistics，查看BD内报文的统计信息。

　　display vxlan statistics source source-ip-address peer peer-ip-address [ vni vni-id ]，查看VXLAN隧道报文的统计信息。

　　reset bridge-domain bd-id statistics，清除指定BD内流量统计信息。

　　reset vxlan statistics source source-ip-address peer peer-ip-address [ vni vni-id ]，清除VXLAN隧道报文统计信息。

 

参考

https://www.cnblogs.com/xinghen1216/p/11813422.html

 

posted on 2020-07-10 15:15  tycoon3  阅读(958)  评论(0)  编辑  收藏  举报

导航