增量式PID控制算法
51单片机PID算法程序(三)增量式PID控制算法 -- Sheldon
当执行机构需要的不是控制量的绝对值,而是控制量的增量(例如去驱动步进电动机)时,需要用PID的“增量算法”。
增量式PID控制算法C51程序
/*====================================================================================================
PID Function
The PID (比例、积分、微分) function is used in mainly
control applications. PIDCalc performs one iteration of the PID
algorithm.
While the PID function works, main is just a dummy program showing
a typical usage.
=====================================================================================================*/
typedef struct PID
{
int SetPoint; //设定目标 Desired Value
long SumError; //误差累计
double Proportion; //比例常数 Proportional Const
double Integral; //积分常数 Integral Const
double Derivative; //微分常数 Derivative Const
int LastError; //Error[-1]
int PrevError; //Error[-2]
} PID;
static PID sPID;
static PID *sptr = &sPID;
/*====================================================================================================
Initialize PID Structure PID参数初始化
=====================================================================================================*/
void IncPIDInit(void)
{
sptr->SumError = 0;
sptr->LastError = 0; //Error[-1]
sptr->PrevError = 0; //Error[-2]
sptr->Proportion = 0; //比例常数 Proportional Const
sptr->Integral = 0; //积分常数Integral Const
sptr->Derivative = 0; //微分常数 Derivative Const
sptr->SetPoint = 0;
}
/*====================================================================================================
增量式PID计算部分
=====================================================================================================*/
int IncPIDCalc(int NextPoint)
{
register int iError, iIncpid; //当前误差
iError = sptr->SetPoint - NextPoint; //增量计算
iIncpid = sptr->Proportion * iError //E[k]项
- sptr->Integral * sptr->LastError //E[k-1]项
+ sptr->Derivative * sptr->PrevError; //E[k-2]项
//存储误差,用于下次计算
sptr->PrevError = sptr->LastError;
sptr->LastError = iError;
//返回增量值
return(iIncpid);
}