inputpath outputpath

 

 

 

hourly job 周期生成outputpath,一个小时一个，

daily job 检查hourly job的outputpath,检查过去24小时内的每个路径，只有全部路径全部存在才会执行daily任务。

 

具体参考 https://github.com/yahoo/oozie/wiki/Oozie-Coord-Use-Cases

内容如下

Oozie Coord Use Cases

Jui-Chung Wu edited this page on 9 Aug 2014 · 3 revisions

 Pages 13

• Home
• Bundle Requirements and Design
• Contributors meetup
• FAQ
• Home Welcome to Oozie!
• How To Contribute
• How to prepare a release
• Oozie 3.0 plans
• Oozie Authentication Specification
• Oozie Coord Use Cases
• Oozie WF use cases
• Release Model
• Unified Credentials Module

Clone this wiki locally

 Clone in Desktop

Coordinator Engine Use Cases

Here are some typical use cases for the Oozie Coordinator Engine.

• You want to run your workflow once a day at 2PM (similar to a CRON).
• You want to run your workflow every hour and you also want to wait for specific data feeds to be available on HDFS
• You want to run a workflow that depends on other workflows.

Benefits

• Easily define all your requirements for triggering your workflow in an XML file
• Avoid running multiple crontabs to trigger your workflows.
• Avoid writing custom scripts that poll HDFS to check for input data and trigger workflows.
• Oozie is provided as a service by the Grid Operations Team. You do not need to install software to start using Oozie on the Grid.

A Simple Coordinator Job

If you want to trigger workflows based on time or availability of data, then you should use the Oozie Coordinator Engine.

The input to the Oozie Coordinator Engine is a Coordinator App.

A Coordinator App consists of 2 files. 1 coordinator.xml: Contains the definition for your Coordinator Job 1 coordinator.properties: Contains properties that you want to pass to your Coordinator Job

These files are used to create a Coordinator Job. A Coordinator Job is an instance of your Coordinator App. The Coordinator App is a template that is used to create Coordinator Jobs.

1) The coordinator app definition is defined in a file named coordinator.xml.

$ cat coordinator.xml
<coordinator-app name="MY_APP" frequency="60" start="2009-01-01T05:00Z" end="2009-01-01T06:00Z" timezone="UTC" xmlns="uri:oozie:coordinator:0.1">
   <action>
      <workflow>
         <app-path>hdfs://localhost:9000/tmp/workflows</app-path>
      </workflow>
   </action>
</coordinator-app>

• This Coordinator Job is assigned the name !MY_APP.
  • It will run every 60 minutes.
  • It will start at 2009-01-01T05:00Z and end at 2009-01-01T06:00Z. (Refer here for more info on Data/Time Formatting).
  • Since the start and end times are 60 minutes apart, this job will run only once.
• When this job is triggered, it will run this workflow: hdfs://localhost:9000/tmp/workflows/workflow.xml
  • Refer to the Oozie Docs for details on how to create an Oozie workflow.

2) The coordinator.properties file must contain a property that specifies the location of your coordinator.xml:

• In this example, the file is located in this HDFS location: /tmp/coord/coordinator.xml

$ cat coordinator.properties
oozie.coord.application.path=hdfs://localhost:9000/tmp/coord

Triggering Coordinator Jobs Based On Time

• You can define a Coordinator Job that runs repeatedly, similar to a CRON.

$ cat coordinator.xml
<coordinator-app name="MY_APP" frequency="60" start="2009-02-01T00:00Z" end="2009-02-02T00:00Z" timezone="UTC" xmlns="uri:oozie:coordinator:0.1">
   <action>
      <workflow>
         <app-path>hdfs://localhost:9000/tmp/workflows</app-path>
      </workflow>
   </action>     
</coordinator-app>

• This Coordinator Job will run every 60 minutes.
  • For jobs that run every 5 mins, set the frequency="5"
  • For jobs that run every hour, set the frequency="60"
  • For jobs that run every day, set the frequency="1440", or frequency="${coord:days(1)}"
  • For jobs that run every week, set the frequency="${coord:days(7)}"
  • For jobs that run every month, set the frequency="${coord:months(1)}"
• It will start at 2009-02-01T00:00Z and end at 2009-02-02T00:00Z (24 hour duration).
• Since the start and end times are 1 day apart, this job will run 24 times
  • It will run every hour for the duration of 1 day.

Using Variables In A Coordinator Job

• An example of a Coordinator Job that uses variable parameters.

$ cat coordinator.xml
<coordinator-app name="MY_APP" frequency="${freq}" start="${startTime}" end="${endTime}" timezone="UTC" xmlns="uri:oozie:coordinator:0.1">
   <action>
      <workflow>
         <app-path>${workflowPath}</app-path>
         <configuration>
            <property>
              <name>start_date</name>
              <value>${startTime}</value>
            </property>
         </configuration>
      </workflow>
   </action>     
</coordinator-app>

• You may want to use variable parameters in your Coordinator Job.
• A variable parameter is defined as follows:

      ${variable_name}

• You can define the variable values in the coordinator.properties file. For example:

$ cat coordinator.properties
oozie.coord.application.path=hdfs://localhost:9000/tmp/coord
freq=60
startTime=2009-01-01T05:00Z
endTime=2009-01-01T06:00Z
workflowPath=hdfs://localhost:9000/tmp/workflows

Triggering Coordinator Jobs When Data Directory is Available

• You can define input data dependencies for your Coordinator Job. Your Job will not run until the input directory is created.
  • eg. hdfs://localhost:9000/tmp/revenue_feed/2010/06/01/03/

$ cat coordinator.xml
<coordinator-app name="MY_APP" frequency="1440" start="2009-02-01T00:00Z" end="2009-02-07T00:00Z" timezone="UTC" xmlns="uri:oozie:coordinator:0.1">
   <datasets>
      <dataset name="input1" frequency="60" initial-instance="2009-01-01T00:00Z" timezone="UTC">
         <uri-template>hdfs://localhost:9000/tmp/revenue_feed/${YEAR}/${MONTH}/${DAY}/${HOUR}</uri-template>
      </dataset>
   </datasets>
   <input-events>
      <data-in name="coordInput1" dataset="input1">
          <start-instance>${coord:current(-23)}</start-instance>
          <end-instance>${coord:current(0)}</end-instance>
      </data-in>
   </input-events>
   <action>
      <workflow>
         <app-path>hdfs://localhost:9000/tmp/workflows</app-path>
      </workflow>
   </action>     
</coordinator-app>

• This Coordinator Job runs every 1440 minutes (24 hours).
• It will start on 2009-02-01T00:00Z and end on 2009-02-07T00:00Z (7 days). The Coordinator jobs will be materialized at these times:
  • 2009-02-01T00:00Z
  • 2009-02-02T00:00Z
  • 2009-02-03T00:00Z
  • 2009-02-04T00:00Z
  • 2009-02-05T00:00Z
  • 2009-02-06T00:00Z

• However, these jobs may not run at the specified times because we added input data dependencies for each job. When each job is materialized, Oozie will check if the specified input data is available.

  • If the data is available, the job will run.
  • If the data is not available, the job will wait in the Oozie queue until the input data is created.

• Each of these daily jobs is dependent on the last 24 hours of hourly data from the input1 feed. Within the input-events section, you will notice that the data-in block specifies the start and end instances for the input data dependencies.

  • ${coord:current(0)} is a function that returns the current instance of the input1 dataset
  • ${coord:current(-23)} is a function that returns the 23rd oldest instance of the input1 dataset
  • For the Coordinator Job that is materialized on 2009-02-01T00:00Z, the start-instance will be 2009-01-31T01:00Z (23 hours earlier) and the end-instance will be 2009-02-01T00:00Z.

   <input-events>
      <data-in name="coordInput1" dataset="input1">
          <start-instance>${coord:current(-23)}</start-instance>
          <end-instance>${coord:current(0)}</end-instance>
      </data-in>
   </input-events>

• The datasets section defines metadata for all of the input datasets
  • name = logical name for the dataset
  • frequency = how often data is written to this dataset
  • initial-instance = timestamp for the first instance of this dataset. Older instances will be ignored.
  • uri-template = HDFS directory structure for the dataset
• In this example, the HDFS directory structure for the input1 dataset is as follows:
  • /tmp/revenue_feed/2009/01/01/00/
  • /tmp/revenue_feed/2009/01/01/01/
  • /tmp/revenue_feed/2009/01/01/02/
  • etc...

   <datasets>
      <dataset name="input1" frequency="60" initial-instance="2009-01-01T00:00Z" timezone="UTC">
         <uri-template>hdfs://localhost:9000/tmp/revenue_feed/${YEAR}/${MONTH}/${DAY}/${HOUR}</uri-template>
      </dataset>
   </datasets>

Triggering Coordinator Jobs When Data File is Available

• You can define input data dependencies for your Coordinator Job. Your Job will not run until the input file is created.
  • eg. hdfs://localhost:9000/tmp/revenue_feed/2010/06/01/03/trigger.dat

$ cat coordinator.xml
<coordinator-app name="MY_APP" frequency="1440" start="2009-02-01T00:00Z" end="2009-02-07T00:00Z" timezone="UTC" xmlns="uri:oozie:coordinator:0.1">
   <datasets>
      <dataset name="input1" frequency="60" initial-instance="2009-01-01T00:00Z" timezone="UTC">
         <uri-template>hdfs://localhost:9000/tmp/revenue_feed/${YEAR}/${MONTH}/${DAY}/${HOUR}</uri-template>
         <done-flag>trigger.dat</done-flag>
      </dataset>
   </datasets>
   <input-events>
      <data-in name="coordInput1" dataset="input1">
          <start-instance>${coord:current(-23)}</start-instance>
          <end-instance>${coord:current(0)}</end-instance>
      </data-in>
   </input-events>
   <action>
      <workflow>
         <app-path>hdfs://localhost:9000/tmp/workflows</app-path>
      </workflow>
   </action>     
</coordinator-app>

Coordinator Jobs That Use Rollups

• You may have a Coordinator Job that will run once a day, and will trigger a workflow that aggregates 24 instances of hourly data.

$ cat coordinator.xml
<coordinator-app name="MY_APP" frequency="1440" start="2009-02-01T00:00Z" end="2009-02-02T00:00Z" timezone="UTC" xmlns="uri:oozie:coordinator:0.1">
   <datasets>
      <dataset name="input1" frequency="60" initial-instance="2009-01-01T00:00Z" timezone="UTC">
         <uri-template>hdfs://localhost:9000/tmp/revenue_feed/${YEAR}/${MONTH}/${DAY}/${HOUR}</uri-template>
      </dataset>
   </datasets>
   <input-events>
      <data-in name="coordInput1" dataset="input1">
          <start-instance>${coord:current(-23)}</start-instance>
          <end-instance>${coord:current(0)}</end-instance>
      </data-in>
   </input-events>
   <action>
      <workflow>
         <app-path>hdfs://localhost:9000/tmp/workflows</app-path>
         <!-- You can define properties that you want to pass to your workflow here -->
         <!-- The input_files variable will contain the hdfs path for the 24 input files -->
         <configuration>
           <property>
              <name>input_files</name>
              <value>${coord:dataIn('coordInput1')}</value>
           </property>
         </configuration>
      </workflow>
   </action>     
</coordinator-app>

Coordinator Jobs That Use Sliding Windows

• You may have a Coordinator Job that will run every 5 minutes, and will trigger a workflow that does a lookup on the last 60mins of data.
• Since the Job frequency is less than the Input frequency, the data seems to slide with the job (i.e. input files are used across multiple runs).

$ cat coordinator.xml
<coordinator-app name="MY_APP" frequency="5" start="2009-02-01T00:00Z" end="2009-02-02T00:00Z" timezone="UTC" xmlns="uri:oozie:coordinator:0.1">
   <datasets>
      <dataset name="input1" frequency="15" initial-instance="2009-01-01T00:00Z" timezone="UTC">
         <uri-template>hdfs://localhost:9000/tmp/revenue_feed/${YEAR}/${MONTH}/${DAY}/${HOUR}/${MINUTE}</uri-template>
      </dataset>
   </datasets>
   <input-events>
      <data-in name="coordInput1" dataset="input1">
          <start-instance>${coord:current(-3)}</start-instance>
          <end-instance>${coord:current(0)}</end-instance>
      </data-in>
   </input-events>
   <action>
      <workflow>
         <app-path>hdfs://localhost:9000/tmp/workflows</app-path>
         <!-- You can define properties that you want to pass to your workflow here -->
         <!-- The input_files variable will contain the hdfs path for the most recent 4 input files -->
         <configuration>
           <property>
              <name>input_files</name>
              <value>${coord:dataIn('coordInput1')}</value>
           </property>
         </configuration>
      </workflow>
   </action>     
</coordinator-app>

Coordinator Job to Create SLA events

A coordinator action could be configured to record the events required to evaluate SLA compliance.

$ cat coordinator.xml 
<coordinator-app xmlns="uri:oozie:coordinator:0.1" xmlns:sla="uri:oozie:sla:0.1" name="sla_coord" frequency="60" start="2009-03-06T010:00Z" end="2009-03-06T11:00Z" timezone="America/Los_Angeles">
  <controls>
    <timeout>10</timeout>
    <concurrency>2</concurrency>
    <execution>LIFO</execution>
  </controls>
  <datasets> </datasets>
  <action>
    <workflow>
      <app-path>hdfs://localhost:9000/tmp/kamrul/workflows/sla-map-reduce</app-path>
      <configuration>
     <property>
        <name>TEST </name>
        <value> ${coord:nominalTime()} </value>
         </property>
      </configuration>
    </workflow>
    <sla:info>
      <sla:app-name>test-app</sla:app-name>
      <sla:nominal-time>${coord:nominalTime()}</sla:nominal-time>
      <sla:should-start>${5 * MINUTES}</sla:should-start>
      <sla:should-end>${2 * HOURS}</sla:should-end>
      <sla:notification-msg>Notifying User for ${coord:nominalTime()} nominal time</sla:notification-msg>
      <sla:alert-contact>www@yahoo.com</sla:alert-contact>
      <sla:dev-contact>abc@yahoo.com</sla:dev-contact>
      <sla:qa-contact>abc@yahoo.com</sla:qa-contact>
      <sla:se-contact>abc@yahoo.com</sla:se-contact>
      <sla:alert-frequency>LAST_HOUR</sla:alert-frequency>
      <sla:alert-percentage>80</sla:alert-percentage>
    </sla:info>
  </action>
</coordinator-app>

• Each coordinator action will create at least three events for normal processing.
  
  • The event CREATED specifies that the coordinator action is registered for SLA tracking.
  • When the action starts executing, an event record of type STARTED is inserted into sla_event table..
  • Finally when an action finishes, event of type either SUCCEEDED/KILLED/FAILED is generated.

Coordinator Job With Timeouts

A coordinator job will timeout if it has not run within the specified amount of time.

• Refer to the timeout tag

$ cat coordinator.xml 
<coordinator-app name="END2END-20" frequency="${coord:days(1)}" 
                 start="${start}" end="${end}" timezone="${timezone}" 
                 xmlns="uri:oozie:coordinator:0.1">
      <controls>
        <timeout>10</timeout>    <!-- timeout if job is not run after 10 minutes -->
        <concurrency>4</concurrency>
      </controls>  
      <datasets>
       <dataset name="din" frequency="${coord:hours(10)}"
                initial-instance="${ds_start}" timezone="${timezone}">
         <uri-template>${baseFsURI}/${YEAR}/${MONTH}/${DAY}/${HOUR}/${MINUTE}</uri-template>
          <done-flag>HELLO</done-flag>
        </dataset>
       <dataset name="dout" frequency="${coord:minutes(300)}"
                initial-instance="${ds_start}" timezone="${timezone}">
         <uri-template>${baseFsURI}/${YEAR}/${MONTH}/${DAY}/${HOUR}/${MINUTE}</uri-template>
        </dataset>
      </datasets>
      <input-events>
         <data-in name="IN1" dataset="din">
       <instance>${coord:current(-1)}</instance>
         </data-in> 
      </input-events>
      <output-events>
         <data-out name="OUT" dataset="dout">
           <instance>${coord:current(1)}</instance>
         </data-out> 
      </output-events>
      <action>
        <workflow>
          <app-path>${wf_app_path}</app-path>
          <configuration>
            <property>
                <name>jobTracker</name>
                <value>${jobTracker}</value>
            </property>
            <property>
                <name>nameNode</name>
                <value>${nameNode}</value>
            </property>
            <property>
              <name>queueName</name>
              <value>${queueName}</value>
            </property>
            <property>
                <name>inputDir</name>
                <value>${coord:dataIn('IN1')}</value>
            </property>
            <property>
              <name>outputDir</name>
              <value>${coord:dataOut('OUT')}</value>
            </property>
         </configuration>
       </workflow>
      </action>     
   </coordinator-app>

Coordinator Job With Specific Input File Dependency

A coordinator action can be triggered when a specific file exists in HDFS.

• Refer to the done-flag tag If the done-flag tag is not specified, then Oozie configures Hadoop to create a _SUCCESS file in the output directory.

$ cat coordinator.xml 
<coordinator-app name="END2END-20" frequency="${coord:days(1)}" 
                 start="${start}" end="${end}" timezone="${timezone}" 
                 xmlns="uri:oozie:coordinator:0.1">
      <controls>
        <timeout>10</timeout>
        <concurrency>6</concurrency>
        <execution>FIFO</execution>
      </controls>  
      <datasets>
       <dataset name="din" frequency="${coord:hours(10)}"
                initial-instance="${ds_start}" timezone="${timezone}">
         <uri-template>${baseFsURI}/${YEAR}/${MONTH}/${DAY}/${HOUR}/${MINUTE}</uri-template>
          <done-flag>HELLO</done-flag>
        </dataset>
       <dataset name="dout" frequency="${coord:minutes(300)}"
                initial-instance="${ds_start}" timezone="${timezone}">
         <uri-template>${baseFsURI}/${YEAR}/${MONTH}/${DAY}/${HOUR}/${MINUTE}</uri-template>
        </dataset>
      </datasets>
      <input-events>
         <data-in name="IN1" dataset="din">
       <instance>${coord:current(-1)}</instance>
         </data-in> 
      </input-events>
      <output-events>
         <data-out name="OUT" dataset="dout">
           <instance>${coord:current(1)}</instance>
         </data-out> 
      </output-events>
      <action>
        <workflow>
          <app-path>${wf_app_path}</app-path>
          <configuration>
            <property>
                <name>inputDir</name>
                <value>${coord:dataIn('IN1')}</value>
            </property>
            <property>
              <name>outputDir</name>
              <value>${coord:dataOut('OUT')}</value>
            </property>
         </configuration>
       </workflow>
      </action>     
   </coordinator-app>

Coordinator Job With EL Functions

A complex example with many EL functions:

• latest function
• current function
• coord:days function
• coord:hours function
• coord:hoursInDay function

$ cat coordinator.xml 
<coordinator-app xmlns="uri:oozie:coordinator:0.1" xmlns:sla="uri:oozie:sla:0.1"  name="ABF1_region_session_base_coord" frequency="${coord:days(1)}" start="${start}" end="${end}" timezone="America/New_York">
   <datasets>
        <include>${include_ds_files}</include>
        <dataset name="ABF1_regular" frequency="${coord:hours(1)}" 
                 initial-instance="${ds_start1}"  timezone="America/New_York">
          <uri-template>${baseFsURI}/${YEAR}${MONTH}${DAY}${HOUR}${MINUTE}/regular</uri-template>
        </dataset>
        <dataset name="ABF1_late" frequency="${coord:hours(1)}" 
                 initial-instance="${ds_start1}"  timezone="America/New_York">
          <uri-template>${baseFsURI}/${YEAR}${MONTH}${DAY}${HOUR}${MINUTE}/late</uri-template>
        </dataset>
        <dataset name="region_session_base" frequency="${coord:days(1)}" 
                 initial-instance="${ds_start1}"  timezone="America/New_York">
          <uri-template>${baseFsURI}/${YEAR}${MONTH}${DAY}/5/</uri-template>
        </dataset>
   </datasets>
      <input-events>
        <data-in name="input_regular" dataset="ABF1_regular">
          <start-instance>${coord:current(-(coord:hoursInDay(0) - 23)-3)}</start-instance>
          <end-instance>${coord:current(-3)}</end-instance>
        </data-in>
        <data-in name="input_late" dataset="ABF1_late">
          <start-instance>${coord:current(-(coord:hoursInDay(0) - 23)-3)}</start-instance>
          <end-instance>${coord:current(-3)}</end-instance>
        </data-in>
        <data-in name="input_metadata_tz" dataset="metadata_tz">
          <instance>${coord:latest(0)}</instance>
        </data-in>
        <data-in name="input_metadata_domain_property" dataset="metadata_domain_property">
          <instance>${coord:latest(0)}</instance>
        </data-in>
        <data-in name="input_metadata_property" dataset="metadata_property">
          <instance>${coord:latest(0)}</instance>
        </data-in>
        <data-in name="input_metadata_dim_page" dataset="metadata_dim_page">
          <instance>${coord:latest(0)}</instance>
        </data-in>
      </input-events>
      <output-events>
         <data-out name="OUT" dataset="region_session_base">
           <instance>${coord:current(0)}</instance>
         </data-out>
      </output-events>
      <action>
        <workflow>
          <app-path>${wf_app_path}</app-path>
          <configuration>
            <property>
                <name>jobTracker</name>
                <value>${jobTracker}</value>
            </property>
            <property>
                <name>nameNode</name>
                <value>${nameNode}</value>
            </property>
            <property>
              <name>queueName</name>
              <value>${queueName}</value>
            </property>
            <property>
                <name>inputDir</name>
                <value>${coord:dataIn('input_regular')},${coord:dataIn('input_late')},${coord:dataIn('input_metadata_tz')},${coord:dataIn('input_metadata_domain_property')},${coord:dataIn('input_metadata_property')}</value>
            </property>
            <property>
              <name>outputDir</name>
              <value>${coord:dataOut('OUT')}</value>
            </property>
         </configuration>
       </workflow>
      </action>
</coordinator-app>

Use Sync Mode to Simulate Async Datasets

Users can use sync mode to simulate async datasets. Those actions whose input data are available will run. In contrast, those actions whose input data are not available will be waiting till time out (Note catch up mode has infinity time out). To use this approach, users have to specify the minimum frequency of data instance generation. The following example shows how to simulate an async dataset where data instances are generated for every at minimum 5 minutes. Actions will time out after 10 minutes under current mode if they do not have data instances to run on.

Obviously, a downside of this approach is that there will be too many actions created doing nothing but waiting. This is particularly true when there exist big time gaps between any two consecutive data instances.

$ cat coordinator.xml 
<coordinator-app name="MY_APP" frequency="${frequency}" start="${start}" end="${end}" timezone="${timezone}" xmlns="uri:oozie:coordinator:0.1">
  <controls>
    <timeout>10</timeout>
  </controls> 
   <datasets>
      <dataset name="din1" frequency="${min_frequency}" initial-instance="${start}" timezone="${timezone}">
         <uri-template>hdfs://localhost:9000/tmp/oozie/${YEAR}/${MONTH}/${DAY}/${HOUR}/${MINUTE}</uri-template>
      </dataset>
   </datasets>
   <input-events>
           <data-in name="din1" dataset="din1">
              <instance>${coord:current(0)}</instance>
           </data-in> 
         </input-events>
   <action>
      <workflow>
         <app-path>hdfs://localhost:9000/user/oozie/examples/workflows/map-reduce</app-path>
      </workflow>
   </action>
</coordinator-app>

$ cat coord-job.properties
oozie.coord.application.path=hdfs://localhost:9000/user/oozie/examples/coordinator
frequency=5
min_frequency=5
start=2010-07-30T23:00Z
end=2010-07-30T23:25Z
timezone=UTC

Coordinator Commands

Submit a Job

• Use the following command to submit this Coordinator Job on the Axonite Blue Grid.
• On success, a Oozie ID will be returned to you.
  • In this example, the Oozie ID is: 0000004-091209145813488-oozie-dani-C

$ export OOZIE_URL=http://localhost:9999/oozie/
$ oozie job -run -config coordinator.properties
job: 0000004-091209145813488-oozie-dani-C

Check Status of a Job

• You can check the status of your Job by using the Oozie ID (which is returned at submission time)

$ oozie job -info 0000004-091209145813488-oozie-dani-C

List All Jobs

• You can check the status of all your Coordinator Jobs.

$ oozie jobs -jobtype coord

Stop/Kill A Job

$ oozie job -kill <oozie ID>