华为交换机S5700-52C-EI开启ssh服务

参考资料

https://blog.csdn.net/qq_34815358/article/details/83865527

https://www.cnblogs.com/Cyanix/p/9992064.html

整理前

1、创建rsa本地密钥对与创建账号
<Quidway>system-view 
Enter system view, return user view with Ctrl+Z.

1）[Huawei]rsa local-key-pair create

The key name will be: Huawei_Host

The range of public key size is (512 ~ 2048).

NOTES: If the key modulus is greater than 512,

it will take a few minutes.

Input the bits in the modulus[default = 512]:

Generating keys...

 

2）华为交换机上面创建账号

aaa

local-user admin password cipher admin1234

local-user admin privilege level 15

local-user admin service-type ssh

local-user adminssh password cipher bw@123456
Info: Add a new user.
local-user adminssh privilege level 3 \用户level最高到15
local-user adminssh service-type ssh

2、开启ssh服务以及ssh用户：

stelnet server enable

ssh user adminssh

ssh user adminssh authentication-type password

ssh user adminssh service-type stelnet


3、VTY下添加设置：

[Huawei]user-interface vty 0 4

[Huawei-ui-vty0-4]authentication-mode aaa

[Huawei-ui-vty0-4]protocol inbound ssh
quit

4 路由
system-view
interface Vlanif 1 
ip address 172.16.72.254 255.255.255.0 
interface GigabitEthernet0/0/1
ip route-static 0.0.0.0 0.0.0.0 172.16.72.1
quit
exit

5.华为交换机初始化
reset saved-configuration
y
reboot
先N,后Y

整理后

1、创建本地密钥对

<Quidway>system-view

[Quidway]rsa local-key-pair create
The key name will be: Core-SW_Host
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
it will take a few minutes.
Input the bits in the modulus[default = 2048]:
Generating keys...
..+++++
........................++
....++++
...........++
2、检查是否存在SSH user（可跳过），系统提示没有SSH user 存在

[Quidway]dis ssh user-information
Info: No SSH user exists.
3、创建SSH user

[Quidway]ssh user adminssh   # 将 adminssh用户变成ssh用户,可以直接敲第二行命令
[Quidway]ssh user adminssh authentication-type password  #认证模式为密码认证
[Quidway]ssh user adminssh service-type stelnet  # 服务类型为stelnet，即SSH
4、创建用户(也可创建华为用户,Telnet用户)

[Quidway]aaa
[Quidway-aaa]local-user adminssh password cipher bw@123456  # bw@123456处为你想要设置的密码
Info: Add a new user.
[Quidway-aaa]local-user test privilege level 3  用户level最高到15
[Quidway-aaa]local-user test service-type ssh  # 开启该用户允许使用SSH访问设备的权限
5、启用SSH（stelnet）服务

[Quidway]stelnet server enable
Info: Succeeded in starting the Stelnet server.
6、配置vty界面支持的登录协议

[Quidway]user-interface vty 0 4
[Quidway-ui-vty0-4]authentication-mode aaa
[Quidway-ui-vty0-4]protocol inbound ssh

quit

7、路由
system-view
interface Vlanif 1 
ip address 172.16.72.254 255.255.255.0 
interface GigabitEthernet0/0/1
ip route-static 0.0.0.0 0.0.0.0 172.16.72.1
quit
exit

8、华为交换机初始化
reset saved-configuration
y
reboot
先N,后Y