qq2440启动linux后插入u盘出现usb 1-1: device descriptor read/64, error -110,usb 1-1: device not accepting address 8, error -110

上位机：ubuntu14.04 64bit

下位机:qq2440

交叉编译器:arm-linux-gcc 3.4.1

下位机使用的linux内核版本:kernel2.6.13

1.插入u盘时错误信息如下:

[root@FriendlyARM /home]# usb 1-1: new full speed USB device using s3c2410-ohci and address 6
usb 1-1: device descriptor read/64, error -110
usb 1-1: device descriptor read/64, error -110
usb 1-1: new full speed USB device using s3c2410-ohci and address 7
usb 1-1: device descriptor read/64, error -110
usb 1-1: device descriptor read/64, error -110
usb 1-1: new full speed USB device using s3c2410-ohci and address 8
usb 1-1: device not accepting address 8, error -110
usb 1-1: new full speed USB device using s3c2410-ohci and address 9
usb 1-1: device not accepting address 9, error -110

 

2.解决方案如下:

2.1修改drivers/usb/host/ohci-s3c2410.c文件，添加以下内容：

　　a.先添加头文件#include <mach/regs-clock.h>

　　b.在s3c2410_start_hc函数中添加以下内容：

　　unsigned long upllvalue = (0x78 << 12) | (0x02 << 4) | (0x03);
        while (upllvalue != __raw_readl(S3C2410_UPLLCON)) {
                __raw_writel(upllvalue, S3C2410_UPLLCON);
                mdelay(1);
        }

　　添加后的s3c2410_start_hc函数如下:

　　static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
{
        struct s3c2410_hcd_info *info = dev->dev.platform_data;

        dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
        clk_enable(clk);

        if (info != NULL) {
                info->hcd       = hcd;
                info->report_oc = s3c2410_hcd_oc;

                if (info->enable_oc != NULL) {
                        (info->enable_oc)(info, 1);
                }
        }
        unsigned long upllvalue = (0x78 << 12) | (0x02 << 4) | (0x03);
        while (upllvalue != __raw_readl(S3C2410_UPLLCON)) {
                __raw_writel(upllvalue, S3C2410_UPLLCON);
                mdelay(1);
        }
}
　　2.2总结：以上修改的函数功能是启动主机控制器,因为usb时钟设置有问题，因而在开启主机控制器时修改时钟,修改后的S3C2410_UPLLCON的值为0xF4100008;

 3.注意：本版本内核没有头文件regs-clock.h，因而我从其他内核中复制过来的，命令如下:

jello@jello-Inspiron-N4050:~/Downloads/qq2440/linux/kernel-2.6.13$ cp /tftpboot/kernel-2.6.35.7/arch/arm/mach-s3c2410/include/mach/regs-clock.h ./