模拟 --- 搜索模拟
Robot Motion
Time Limit: 1000MS | Memory Limit: 10000K | |
Total Submissions: 10130 | Accepted: 4932 |
Description
![](http://poj.org/images/1573_1.jpg)
A robot has been programmed to follow the instructions in its path. Instructions for the next direction the robot is to move are laid down in a grid. The possible instructions are
N north (up the page)
S south (down the page)
E east (to the right on the page)
W west (to the left on the page)
For example, suppose the robot starts on the north (top) side of Grid 1 and starts south (down). The path the robot follows is shown. The robot goes through 10 instructions in the grid before leaving the grid.
Compare what happens in Grid 2: the robot goes through 3 instructions only once, and then starts a loop through 8 instructions, and never exits.
You are to write a program that determines how long it takes a robot to get out of the grid or how the robot loops around.
Input
There
will be one or more grids for robots to navigate. The data for each is
in the following form. On the first line are three integers separated by
blanks: the number of rows in the grid, the number of columns in the
grid, and the number of the column in which the robot enters from the
north. The possible entry columns are numbered starting with one at the
left. Then come the rows of the direction instructions. Each grid will
have at least one and at most 10 rows and columns of instructions. The
lines of instructions contain only the characters N, S, E, or W with no
blanks. The end of input is indicated by a row containing 0 0 0.
Output
For
each grid in the input there is one line of output. Either the robot
follows a certain number of instructions and exits the grid on any one
the four sides or else the robot follows the instructions on a certain
number of locations once, and then the instructions on some number of
locations repeatedly. The sample input below corresponds to the two
grids above and illustrates the two forms of output. The word "step" is
always immediately followed by "(s)" whether or not the number before it
is 1.
Sample Input
3 6 5 NEESWE WWWESS SNWWWW 4 5 1 SESWE EESNW NWEEN EWSEN 0 0 0
Sample Output
10 step(s) to exit 3 step(s) before a loop of 8 step(s)
【题目来源】
http://poj.org/problem?id=1573
【题目大意】
给定一个网格,每个格子上都有相关的行走方向。玩过“管道工人”这个小游戏的人就很好理解了,这个和那个原理是一样的。
很水的题,一遍AC,只要思路清晰。
#include<cstdio> #include<iostream> #include<cstdlib> #include<cstring> #include<cmath> #include<algorithm> #include<bitset> #define MAX 1000 using namespace std; struct Node { char c; int step; bool vis; }; Node Map[MAX][MAX]; int step1; int pa_x,pa_y; //当前结点的前驱 void make_Map(int n,int m) { int i,j; for(i=0;i<=n+1;i++) { for(j=0;j<=m+1;j++) { Map[i][j].step=0; Map[i][j].vis=false; } } for(i=0;i<=n+1;i++) Map[i][0].c=Map[i][m+1].c='Q'; for(i=0;i<=m+1;i++) Map[0][i].c=Map[n+1][i].c='Q'; } int go(int n,int m) { int i,j; if(Map[n][m].c=='Q') { printf("%d step(s) to exit\n",step1); return 1; } if(Map[n][m].vis) { printf("%d step(s) before a loop of %d step(s)\n",Map[n][m].step,Map[pa_x][pa_y].step+1-Map[n][m].step); return true; } Map[n][m].step=step1++; Map[n][m].vis=true; pa_x=n; pa_y=m; switch(Map[n][m].c) { case 'N':go(n-1,m);break; case 'E':go(n,m+1);break; case 'S':go(n+1,m);break; case 'W':go(n,m-1);break; } return false; } int main() { int n,m,v; while(scanf("%d%d%d",&n,&m,&v),n+m+v) { getchar(); step1=0; make_Map(n,m); int i,j; for(i=1;i<=n;i++) { for(j=1;j<=m;j++) { scanf("%c",&Map[i][j].c); } getchar(); } go(1,v); } return 0; }