Spark开发环境配置
修改hostname bogon 为localhost
查看ip地址
[training@bogon ~]$ sudo hostname localhost [training@bogon ~]$ hostname
执行结果
此时python 版本为2.7
将python版本升级至3.0及以上
一、 下载欲升级python版本 Python-3.4.5,将包放于本机与虚似机的共享目录下,上传至虚似机的opt目录下
二、 解压
三、阅读README安装步骤,根据实验步骤向下执行
执行完成后出现Succssfully,恭喜你!安装成功!
四、配置环境变量,让Spark用到新版本的Python。编辑 ~training/.bashrc,添加如下内容,并在相应位置下载ipython3
五、 修改 spark-evn.sh 配置文件中的对应参数PYSPARK_PYTHON,此文件一般在 /etc/spark/conf 或者Spark 安装目录的conf 目录下。
六、 Python和ipython都升级完成,但是spark的版本是1.6的,下面我们开始升级spark
此时我们已经将python升级到3.4.5,但是spark的版本没有改变!!
升级spark
一、将共享文件夹中的要升级的spark版本到opt目录下
二、解压
[training@localhost opt]$ tar -zvxf spark-2.1.0-bin-hadoop2.6.tgz [training@localhost conf]$ ls /opt/ spark-2.1.0-bin-hadoop2.6.tgz spark-2.1.0-bin-hadoop2.6
三、修改新版Spark配置文件,将Hadoop、hive 配置文件拷贝到Spark配置文件目录中:
四、安装成功后的页面
五、虽然下载成功了,但是对于一些日常代码的编写与保存不好,所以我们需要下载一个notebook
运行界面
安装matplotlib 库
测试matplotlib 库
import matplotlib.pyplot as plt from matplotlib.sankey import Sankey fig = plt.figure(figsize=(8, 9)) ax = fig.add_subplot(1, 1, 1, xticks=[], yticks=[], title="Rankine Power Cycle: Example 8.6 from Moran and " "Shapiro\n\x22Fundamentals of Engineering Thermodynamics " "\x22, 6th ed., 2008") Hdot = [260.431, 35.078, 180.794, 221.115, 22.700, 142.361, 10.193, 10.210, 43.670, 44.312, 68.631, 10.758, 10.758, 0.017, 0.642, 232.121, 44.559, 100.613, 132.168] # MW sankey = Sankey(ax=ax, format='%.3G', unit=' MW', gap=0.5, scale=1.0/Hdot[0]) sankey.add(patchlabel='\n\nPump 1', rotation=90, facecolor='#37c959', flows=[Hdot[13], Hdot[6], -Hdot[7]], labels=['Shaft power', '', None], pathlengths=[0.4, 0.883, 0.25], orientations=[1, -1, 0]) sankey.add(patchlabel='\n\nOpen\nheater', facecolor='#37c959', flows=[Hdot[11], Hdot[7], Hdot[4], -Hdot[8]], labels=[None, '', None, None], pathlengths=[0.25, 0.25, 1.93, 0.25], orientations=[1, 0, -1, 0], prior=0, connect=(2, 1)) sankey.add(patchlabel='\n\nPump 2', facecolor='#37c959', flows=[Hdot[14], Hdot[8], -Hdot[9]], labels=['Shaft power', '', None], pathlengths=[0.4, 0.25, 0.25], orientations=[1, 0, 0], prior=1, connect=(3, 1)) sankey.add(patchlabel='Closed\nheater', trunklength=2.914, fc='#37c959', flows=[Hdot[9], Hdot[1], -Hdot[11], -Hdot[10]], pathlengths=[0.25, 1.543, 0.25, 0.25], labels=['', '', None, None], orientations=[0, -1, 1, -1], prior=2, connect=(2, 0)) sankey.add(patchlabel='Trap', facecolor='#37c959', trunklength=5.102, flows=[Hdot[11], -Hdot[12]], labels=['\n', None], pathlengths=[1.0, 1.01], orientations=[1, 1], prior=3, connect=(2, 0)) sankey.add(patchlabel='Steam\ngenerator', facecolor='#ff5555', flows=[Hdot[15], Hdot[10], Hdot[2], -Hdot[3], -Hdot[0]], labels=['Heat rate', '', '', None, None], pathlengths=0.25, orientations=[1, 0, -1, -1, -1], prior=3, connect=(3, 1)) sankey.add(patchlabel='\n\n\nTurbine 1', facecolor='#37c959', flows=[Hdot[0], -Hdot[16], -Hdot[1], -Hdot[2]], labels=['', None, None, None], pathlengths=[0.25, 0.153, 1.543, 0.25], orientations=[0, 1, -1, -1], prior=5, connect=(4, 0)) sankey.add(patchlabel='\n\n\nReheat', facecolor='#37c959', flows=[Hdot[2], -Hdot[2]], labels=[None, None], pathlengths=[0.725, 0.25], orientations=[-1, 0], prior=6, connect=(3, 0)) sankey.add(patchlabel='Turbine 2', trunklength=3.212, facecolor='#37c959', flows=[Hdot[3], Hdot[16], -Hdot[5], -Hdot[4], -Hdot[17]], labels=[None, 'Shaft power', None, '', 'Shaft power'], pathlengths=[0.751, 0.15, 0.25, 1.93, 0.25], orientations=[0, -1, 0, -1, 1], prior=6, connect=(1, 1)) sankey.add(patchlabel='Condenser', facecolor='#58b1fa', trunklength=1.764, flows=[Hdot[5], -Hdot[18], -Hdot[6]], labels=['', 'Heat rate', None], pathlengths=[0.45, 0.25, 0.883], orientations=[-1, 1, 0], prior=8, connect=(2, 0)) diagrams = sankey.finish() for diagram in diagrams: diagram.text.set_fontweight('bold') diagram.text.set_fontsize('10') for text in diagram.texts: text.set_fontsize('10') # Notice that the explicit connections are handled automatically, but the # implicit ones currently are not. The lengths of the paths and the trunks # must be adjusted manually, and that is a bit tricky. plt.show()
运行结果