11 2022 档案

摘要:https://blog.csdn.net/sxw1002/article/details/53011310?spm=1001.2101.3001.6650.1&utm_medium=distribute.pc_relevant.none-task-blog-2%7Edefault%7ECTRLIS 阅读全文
posted @ 2022-11-29 18:31 cnchengv 阅读(7) 评论(0) 推荐(0) 编辑
摘要:5、网卡?? https://blog.csdn.net/baidxi/article/details/126917088 4、 退出qemu killall qemu-system-arm 1、qemu vexpress-a9 https://www.jianshu.com/p/94833e841 阅读全文
posted @ 2022-11-27 21:56 cnchengv 阅读(49) 评论(0) 推荐(0) 编辑
摘要:1、 编译qemu源码 https://blog.csdn.net/qq_36393978/article/details/118086216 22.04还是装不上 22.10装上了 2、编译内核错误 把gcc-12换成gcc-11,并加软链接 sudo ln -sf gcc-11 gcc 阅读全文
posted @ 2022-11-26 00:40 cnchengv 阅读(18) 评论(0) 推荐(0) 编辑
摘要:2、 qemu https://www.cnblogs.com/littleKuBao/p/15057575.html?ivk_sa=1024320u 1、遇到问题,静态编译busy问题/usr/bin/ld: cannot find -lm 用静态方式编译busybox-1.33.1/usr/bi 阅读全文
posted @ 2022-11-25 16:00 cnchengv 阅读(28) 评论(0) 推荐(0) 编辑
摘要:C:\Users\101*****>tracert 192.168.5.1 通过最多 30 个跃点跟踪 到 192.168.5.1 [192.168.5.1] 的路由: 1 1 ms 1 ms 1 ms 10.46.17.129 [10.46.17.129] 2 5 ms 4 ms 5 ms 10. 阅读全文
posted @ 2022-11-23 11:08 cnchengv 阅读(400) 评论(0) 推荐(0) 编辑
摘要:https://www.cnblogs.com/haibindev/archive/2011/12/21/2296173.html 调用要改,to thi [DllImport("libvlc", CallingConvention = CallingConvention.Cdecl, ExactS 阅读全文
posted @ 2022-11-22 18:18 cnchengv 阅读(132) 评论(0) 推荐(0) 编辑
摘要:11 阅读全文
posted @ 2022-11-20 21:46 cnchengv 阅读(8) 评论(0) 推荐(0) 编辑
摘要:3、 Linux下编译程序/usr/bin/ld: cannot find -l*错误的解决方法 https://blog.csdn.net/weixin_46386047/article/details/126098559 2、 Linux系统下查找安装包的方法 http://t.zoukanka 阅读全文
posted @ 2022-11-18 11:19 cnchengv 阅读(149) 评论(0) 推荐(0) 编辑
摘要:1、无参数和带参数 def spamrun(fn): def sayspam(*args): print("spam,spam,spam") fn(*args) return sayspam @spamrun def useful(a,b): print(a*b) def attrs(**kwds) 阅读全文
posted @ 2022-11-17 11:08 cnchengv 阅读(39) 评论(0) 推荐(0) 编辑
摘要:https://zhuanlan.zhihu.com/p/433633168 重 https://blog.csdn.net/weixin_48006170/article/details/119852502 阅读全文
posted @ 2022-11-11 15:17 cnchengv 阅读(8) 评论(0) 推荐(0) 编辑
摘要:1、 /** GPIO - Register Layout Typedef */ typedef struct { __IO uint32_t DR; /**< GPIO data register, offset: 0x0 */ __IO uint32_t GDIR; /**< GPIO dire 阅读全文
posted @ 2022-11-04 16:29 cnchengv 阅读(287) 评论(0) 推荐(0) 编辑
摘要:1、qu /* * @description : 从ap3216c读取多个寄存器数据 * @param - dev: ap3216c设备 * @param - reg: 要读取的寄存器首地址 * @param - val: 读取到的数据 * @param - len: 要读取的数据长度 * @ret 阅读全文
posted @ 2022-11-04 15:32 cnchengv 阅读(18) 评论(0) 推荐(0) 编辑
摘要:1、spi 驱动核心这两个: icm20608_read_regs /* 一共发送len+1个字节的数据,第一个字节为 寄存器首地址,一共要读取len个字节长度的数据,*/ txdata[0] = reg | 0x80; /* 写数据的时候首寄存器地址bit8要置1 */ t->tx_buf = t 阅读全文
posted @ 2022-11-04 15:06 cnchengv 阅读(88) 评论(0) 推荐(0) 编辑
摘要:主要三个部分 1、设置复用寄存器 2、往配置寄存器赋值 3、gpio具体 void led_init(void) { /* 1、初始化IO复用 */ IOMUXC_SetPinMux(IOMUXC_GPIO1_IO03_GPIO1_IO03,0); /* 复用为GPIO1_IO03 */ /* 2、 阅读全文
posted @ 2022-11-02 09:23 cnchengv 阅读(20) 评论(0) 推荐(0) 编辑

点击右上角即可分享
微信分享提示