Eth-Trunk 链接聚合

Eth-Trunk 链路聚合

华为交换机核心设备配置Eth-Trunk

创建Eth-Trunk口，并配置IP地址

interface Eth-Trunk1
undo portswitch  // 将接口转换为三层接口
description "core R1 to SW2"  // 描述信息
ip address 192.168.1.254 255.255.255.0

将物理接口加入Eth-Trunk口中

interface GigabitEthernet0/0/1
Eth-Trunk1
interface GigabitEthernet0/0/2
Eth-Trunk1

查看Eth-Trunk接口信息

display Eth-Trunk 1

查看详细信息命令

dispaly interface Eth-Trunk 1

---

H3C 交换机配置命令

1. 建立汇聚组1
 
<H3C>system-view
[H3C]interface Bridge-Aggregation 1
[H3C-Bridge-Aggregation1]quit
 
-------------------------------------------------------
// H3C防火墙/路由器三层汇聚口创建命令
[H3C]interface Route-Aggregation 1
-------------------------------------------------------
 
2．进入端口G1/0/5,将端口加入汇聚组
 
[H3C]interface GigabitEthernet 1/0/5
[H3C-GigabitEthernet1/0/5]port link-aggregation group 1
[H3C-GigabitEthernet1/0/5]quit
 
3.查看汇聚端口配置信息
 
显示摘要信息
[H3C]display link-aggregation summary 
 
显示详细信息
[H3C]display link-aggregation verbose
 

H3C 交换机 VLAN 配置

1,创建vlan 11
 
[H3C]vlan 11
[H3C-vlan11]quit
 
2,将交换机端口加入VLAN 11
 
[H3C]interface GigabitEthernet 1/0/1
[H3C-GigabitEthernet1/0/1]port link-type access
[H3C-GigabitEthernet1/0/1]port access vlan 11
[H3C-GigabitEthernet1/0/1]quit
 
3，配置VLAN接口IP
 
[H3C]interface Vlan-interface 11
[H3C-Vlan-interface11]ip address 10.0.51.1 255.255.255.0
[H3C-Vlan-interface11]quit
 
4，将聚合口配置为trunk
 
[H3C]interface Bridge-Aggregation 1
[H3C-Bridge-Aggregation1]port link-type trunk
Configuring GigabitEthernet1/0/4 done.
Configuring GigabitEthernet1/0/5 done.
Configuring GigabitEthernet1/0/6 done.
[H3C-Bridge-Aggregation1]port trunk permit vlan all
Configuring GigabitEthernet1/0/4 done.
Configuring GigabitEthernet1/0/5 done.
Configuring GigabitEthernet1/0/6 done.
[H3C-Bridge-Aggregation1]quit
 

H3C 交换机 端口限速配置

单位kbps
 
[H3C]interface GigabitEthernet 1/0/2
[H3C-GigabitEthernet1/0/2]qos lr outbound cir 640