1、进入管理员权限
[anzerong@localhost ~]# su - root password [root@localhost ~]#
2、创建用户组oinstall
[root@localhost ~]# groupadd oinstall
3、创建用户组dba
[root@localhost ~]# groupadd dba
4、创建oracle用户，并加入到oinstall和dba用户组
[root@localhost ~]# useradd -g oinstall -g dba -m oracle
5、设置用户oracle的登陆密码，不设置密码，在CentOS的图形登陆界面没法登陆
[root@localhost ~]# passwd oracle Changing password for user oracle. New password: # 密码 BAD PASSWORD: The password is shorter than 8 characters Retype new password: # 再次输入密码 passwd: all authentication tokens updated successfully.
6、查看新建的oracle用户
[root@localhost ~]# id oracle uid=1001(oracle) gid=1002(dba) groups=1002(dba)
7、进入根目录
[root@localhost ~]# cd /.
8、创建oracle数据库安装目录
[root@localhost /]# mkdir -p /data/oracle
9、创建oracle数据库配置文件目录
[root@localhost /]# mkdir -p /data/oraInventory
10、创建oracle数据库软件包解压目录
[root@localhost /]# mkdir -p /data/database
11、创建完后检查一下
[root@localhost /]# cd /data [root@localhost data]# ls database oracle oraInventory
12、设置目录所有者为oinstall用户组的oracle用户
[root@localhost data]# chown -R oracle:oinstall /data/oracle [root@localhost data]# chown -R oracle:oinstall /data/oraInventory [root@localhost data]# chown -R oracle:oinstall /data/database
13、修改OS系统标识（oracle默认不支持CentOS系统安装，但是centos与redhat的关系自行百度）
[root@localhost data]# cat /proc/version Linux version 3.10.0-514.26.2.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-11) (GCC) ) #1 SMP Tue Jul 4 15:04:05 UTC 2017 [root@localhost data]# cat /etc/redhat-release CentOS Linux release 7.3.1611 (Core) [root@localhost data]# vi /etc/redhat-release [root@localhost data]# cat /etc/redhat-release redhat-7
14、安装oracle数据库所需要的软件包
[root@localhost data]# yum install binutils compat-libcap1 gcc gcc-c++ glibc glibc-
devel ksh libaio libaio-devel libgcc libstdc++ libstdc++-devel libXi libXtst make
sysstat unixODBC unixODBC-devel glibc elfutils-libelf-devel compat*
15、查看防火墙状态（运行中）
[root@localhost data]# systemctl status firewalld.service ● firewalld.service - firewalld - dynamic firewall daemon Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; vendor preset: enabled) Active: active (running) since Wed 2017-09-13 09:23:08 CST; 25min ago Docs: man:firewalld(1) Main PID: 641 (firewalld) CGroup: /system.slice/firewalld.service └─641 /usr/bin/python -Es /usr/sbin/firewalld --nofork --nopid Sep 13 09:22:58 localhost.localdomain systemd[1]: Starting firewalld - dynami... Sep 13 09:23:08 localhost.localdomain systemd[1]: Started firewalld - dynamic... Hint: Some lines were ellipsized, use -l to show in full.
16、关闭防火墙
[root@localhost data]# systemctl stop firewalld.service
17、查看防火墙状态（已关闭）
[root@localhost data]# systemctl status firewalld.service ● firewalld.service - firewalld - dynamic firewall daemon Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; vendor preset: enabled) Active: inactive (dead) since Wed 2017-09-13 09:48:55 CST; 10s ago Docs: man:firewalld(1) Process: 641 ExecStart=/usr/sbin/firewalld --nofork --nopid $FIREWALLD_ARGS (code=exited, status=0/SUCCESS) Main PID: 641 (code=exited, status=0/SUCCESS) Sep 13 09:22:58 localhost.localdomain systemd[1]: Starting firewalld - dynami... Sep 13 09:23:08 localhost.localdomain systemd[1]: Started firewalld - dynamic... Sep 13 09:48:54 localhost.localdomain systemd[1]: Stopping firewalld - dynami... Sep 13 09:48:55 localhost.localdomain systemd[1]: Stopped firewalld - dynamic... Hint: Some lines were ellipsized, use -l to show in full.
18、禁止使用防火墙（重启也是禁止的）
[root@localhost data]# systemctl disable firewalld.service Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service. Removed symlink /etc/systemd/system/basic.target.wants/firewalld.service.
19、关闭selinux（需重启生效）
[root@localhost data]# vi /etc/selinux/config [root@localhost data]# cat /etc/selinux/config
/etc/selinux/config 最终文档为：
# This file controls the state of SELinux on the system. # SELINUX= can take one of these three values: # enforcing - SELinux security policy is enforced. # permissive - SELinux prints warnings instead of enforcing. # disabled - No SELinux policy is loaded. SELINUX=disabled #此处修改为disabled # SELINUXTYPE= can take one of three two values: # targeted - Targeted processes are protected, # minimum - Modification of targeted policy. Only selected processes are protected. # mls - Multi Level Security protection. SELINUXTYPE=targeted
20、修改内核参数（加入斜体部分
[root@local++host data]# vi /etc/sysctl.conf [root@localhost data]# cat /etc/sysctl.conf
# sysctl settings are defined through files in # /usr/lib/sysctl.d/, /run/sysctl.d/, and /etc/sysctl.d/. # # Vendors settings live in /usr/lib/sysctl.d/. # To override a whole file, create a new file with the same in # /etc/sysctl.d/ and put new settings there. To override # only specific settings, add a file with a lexically later # name in /etc/sysctl.d/ and put new settings there. # # For more information, see sysctl.conf(5) and sysctl.d(5). net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 fs.file-max = 6815744 #设置最大打开文件数 fs.aio-max-nr = 1048576 kernel.shmall = 2097152 #共享内存的总量，8G内存设置：2097152*4k/1024/1024 kernel.shmmax = 2147483648 #最大共享内存的段大小 kernel.shmmni = 4096 #整个系统共享内存端的最大数 kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 #可使用的IPv4端口范围 net.core.rmem_default = 262144 net.core.rmem_max= 4194304 net.core.wmem_default= 262144 net.core.wmem_max= 1048576
21、使配置修改内核的参数生效
[root@localhost data]# sysctl -p
net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 sysctl: setting key "fs.file-max": Invalid argument fs.file-max = 6815744 #设置最大打开文件数 fs.aio-max-nr = 1048576 sysctl: setting key "kernel.shmall": Invalid argument kernel.shmall = 2097152 #共享内存的总量，8G内存设置：2097152*4k/1024/1024 sysctl: setting key "kernel.shmmax": Invalid argument kernel.shmmax = 2147483648 #最大共享内存的段大小 sysctl: setting key "kernel.shmmni": Invalid argument kernel.shmmni = 4096 #整个系统共享内存端的最大数 kernel.sem = 250 32000 100 128 sysctl: setting key "net.ipv4.ip_local_port_range": Invalid argument net.ipv4.ip_local_port_range = 9000 65500 #可使用的IPv4端口范围 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576
22、对oracle用户设置限制，提高软件运行性能（斜体为添加部分）
[root@localhost data]# vi /etc/security/limits.conf [root@localhost data]# cat /etc/security/limits.conf
# /etc/security/limits.conf # #This file sets the resource limits for the users logged in via PAM. #It does not affect resource limits of the system services. # #Also note that configuration files in /etc/security/limits.d directory, #which are read in alphabetical order, override the settings in this #file in case the domain is the same or more specific. #That means for example that setting a limit for wildcard domain here #can be overriden with a wildcard setting in a config file in the #subdirectory, but a user specific setting here can be overriden only #with a user specific setting in the subdirectory. # #Each line describes a limit for a user in the form: # # #* soft core 0 #* hard rss 10000 #@student hard nproc 20 #@faculty soft nproc 20 #@faculty hard nproc 50 #ftp hard nproc 0 #@student - maxlogins 4 oracle soft nproc 2047 oracle hard nproc 16384 oracle soft nofile 1024 oracle hard nofile 65536 # End of file
23、配置用户的环境变量（斜体部分为添加代码）
[root@localhost data]# vi /home/oracle/.bash_profile [root@localhost data]# cat /home/oracle/.bash_profile
# .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/.local/bin:$HOME/bin export PATH export ORACLE_BASE=/data/oracle #oracle数据库安装目录 export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1 #oracle数据库路径 export ORACLE_SID=orcl #oracle启动数据库实例名 export ORACLE_TERM=xterm #xterm窗口模式安装 export PATH=$ORACLE_HOME/bin:/usr/sbin:$PATH #添加系统环境变量 export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib #添加系统环境变量 export LANG=C #防止安装过程出现乱码 export NLS_LANG=AMERICAN_AMERICA.ZHS16GBK #设置Oracle客户端字符集，必须与Oracle安装时设置的字符集保持一致
24、使用户的环境变量配置立即生效
[root@localhost data]# source /home/oracle/.bash_profile
25、将安装包移动到/usr/local/src路径下
[root@localhost ~]# cd /. [root@localhost /]# cd /home/anzerong/Desktop/ [root@localhost Desktop]# ls linux.x64_11gR2_database_1of2.zip linux.x64_11gR2_database_2of2.zip [root@localhost Desktop]# mv linux.x64_11gR2_database_1of2.zip /usr/local/src [root@localhost Desktop]# ls linux.x64_11gR2_database_2of2.zip [root@localhost Desktop]# mv linux.x64_11gR2_database_2of2.zip /usr/local/src
26、重启系统，确保所有设置生效
[root@localhost Desktop]# reboot
27、从oracle用户进入/usr/local/src目录
[oracle@localhost /]$ cd /usr/local/src [oracle@localhost src]$ ls linux.x64_11gR2_database_1of2.zip linux.x64_11gR2_database_2of2.zip
28、解压两个软件包至/data/database/目录下
[oracle@localhost src]$ unzip linux.x64_11gR2_database_1of2.zip -d /data/database/ #解压 (省略...) [oracle@localhost src]$ unzip linux.x64_11gR2_database_2of2.zip -d /data/database/ #解压 (省略...)
29、进入管理员权限
[oracle@localhost src]$ su root Password:
30、设置目录所有者为oinstall用户组的oracle用户
[root@localhost src]# chown -R oracle:oinstall /data/database/database/
31、执行安装脚本
[oracle@localhost /]$ cd /data/database/database/ [oracle@localhost database]$ ls doc install response rpm runInstaller sshsetup stage welcome.html [oracle@localhost database]$ ./runInstaller Starting Oracle Universal Installer... (省略...)
oracle图形化安装界面打开
32、==++Configure Security Updates++==
去掉 I wish to receive security updates via My Oracle Support.
点击 “Nest >”
33、==++Installation Option++==
选择第二项 Install database software only
点击 “Nest >”
34、==++Grid Options++==
选择单例模式 Single instance database installation
点击 “Nest >”
35、==++Product Languages++==
选择英语 English（根据系统默认选择好了）
点击 “Nest >”
36、==++Database Edition++==
选择第一个企业版
37、==++Installation Location++==
确定数据软件的安装路径，自动读取前面Oracle环境变量中配置的值
点击 “Nest >”
38、==++Create Inventory++==
选择默认，不做修改
点击 “Nest >”
39、==++Operation System Groups++==
全部使用dba用户组
点击 “Nest >”
40、==++Prepequisite Checks++==
按照提示信息一个一个解决
点击 “Nest >”
PS：pdksh安装
1、卸载已安装的ksh
[root@localhost Desktop]# rpm -e pdksh* [root@localhost Desktop]# rpm -e ksh*
2、下载pdksh-5.2.14-21.x86_64.rpm
3、安装
[root@localhost Desktop]# rpm -ivh pdksh-5.2.14-21.x86_64.rpm --force --nodeps
按提示解决缺少的依赖包，之后点击 “Check Again”
可以忽略缺少的32bit依赖包
41、==++Summary++==
点击 “Finsh”
42、==++Install Product++==
在此过程中，安装界面会变成黑色，有一长条出现（其实是一个提示框），调整高度与宽度查看，
或者可以直接右键选择close
43、==++Finish++==
