k8s 1.17.9 部署

1. 实验架构

主机名	IP地址
hdss11.host.com	192.168.31.11
hdss200.host.com	192.168.31.200
hdss37.host.com	192.168.31.37
hdss38.host.com	192.168.31.38
hdss39.host.com	192.168.31.39
hdss40.host.com	192.168.31.40

2 实验准备工作

2.1 准备虚拟机

6台VM, 每台2c2g

配置vmware网段为 192.168.31.0, 子网掩码为 255.255.255.0

配置vmware的网关为 192.169.31.2

将vmnet8 网卡的地址配置为 10.4.7.1 ，子网掩码为 255.255.255.0

在 /etc/sysconfig/network-scripts/ifcfg-eth0 配置网卡

TYPE=Ethernet
BOOTPROTO=static
NAME=eth0
DEVICE=eth0
ONBOOT=yes
IPADDR=192.168.31.11
NETMASK=255.255.255.0
GATEWAY=192.168.31.2
DNS1=192.168.31.2
DNS2=223.5.5.5

重启网卡

systemctl restart network

2.2 配置基础环境

配置阿里的源，并安装epel-release

wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
yum makecache
yum -y install epel-release

关闭SElinux 和 firewalld

systemctl stop firewalld
systemctl disable firewalld
sed -i 's/SELINUX=.*/SELINUX=disabled/g' /etc/selinux/config
yum -y install iptables-services && systemctl start iptables && systemctl enable iptables && iptables -F && service iptables save

安装必要的工具

yum -y install conntrack ntpdate ntp ipvsadm ipset jq iptables curl sysstat vim bash-com*
yum -y install wget net-tools telnet tree nmap sysstat lrzsz dos2unix bind-utils

调整内核参数

cat > kubernetes.conf <<EOF
net.bridge.bridge-nf-call-iptables=1
net.bridge.bridge-nf-call-ip6tables=1
net.ipv4.ip_forward=1
net.ipv4.tcp_tw_recycle=0
vm.swappiness=0
vm.overcommit_memory=1
vm.panic_on_oom=0
fs.inotify.max_user_instances=8192
fs.inotify.max_user_watches=1048576
fs.file-max=52706963
fs.nr_open=52706963
net.ipv6.conf.all.disable_ipv6=1
net.netfilter.nf_conntrack_max=2310720
EOF

cp kubernetes.conf /etc/sysctl.d/kubernetes.conf
sysctl -p /etc/sysctl.d/kubernetes.conf

调整系统时区

timedatectl set-timezone Asia/Shanghai
timedatectl set-local-rtc 0

重启依赖于系统事件的服务

systemctl restart rsyslog.service 
systemctl restart crond.service

关闭系统不需要的服务

systemctl stop postfix.service && systemctl disable postfix.service

设置rsyslogd和systemd journald

mkdir /var/log/journal
mkdir /etc/systemd/journald.conf.d
cat > /etc/systemd/journald.conf.d/99-prophet.cof <<EOF
[Journal]
# 持久化保存到磁盘
Storage=persistent

# 压缩历史日志
Compress=yes

SyncIntervalSec=5m
RateLimitInterval=30s
RateLimitBurst=1000

# 最大占用空间10G
SystemMaxUse=10G

# 单日志文件最大 200M
SystemMaxFileSize=200M

# 日志保存时间2周
MaxRetentionSec=2week

# 不将日志转发到syslog
ForwardToSyslog=no
EOF

systemctl restart systemd-journald.service

Kube-proxy开启ipvs的前置条件

modprobe br_netfilter
cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
EOF

chmod 755 /etc/sysconfig/modules/ipvs.modules && bash
/etc/sysconfig/modules/ipvs.modules && lsmod |grep -e ip_vs -e nf_conntrack_ipv4

关闭NUMA

cp /etc/default/grub{,.bak}
sed -i 's#GRUB_CMDLINE_LINUX="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap net.ifnames=0 rhgb quiet"#GRUB_CMDLINE_LINUX="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap net.ifnames=0 rhgb quiet numa=off"#g' /etc/default/grub

2.3 DNS服务初始化

192.168.31.11 上

2.3.1 安装bind

yum -y install bind

2.3.2 配置主配置文件

修改主配置文件 /etc/named.conf

options {
    listen-on port 53 { 192.168.31.11; }; //监听地址
    listen-on-v6 port 53 { ::1; };
    directory   "/var/named";
    dump-file   "/var/named/data/cache_dump.db";
    statistics-file "/var/named/data/named_stats.txt";
    memstatistics-file "/var/named/data/named_mem_stats.txt";
    recursing-file  "/var/named/data/named.recursing";
    secroots-file   "/var/named/data/named.secroots";
    allow-query     { any; };  //哪一些客户端可以通过当前主机这台DNS查到DNS关系
    forwarders      { 192.168.31.2; };  //上一层DNS, 如果当前DNS无法查询, 则往上一层找， 即网关
    recursion yes;   // DNS服务采用递归算法给客户端提供DNS查询
    dnssec-enable yes;
    dnssec-validation yes;
    /* Path to ISC DLV key */
    bindkeys-file "/etc/named.root.key";
    managed-keys-directory "/var/named/dynamic";
    pid-file "/run/named/named.pid";
    session-keyfile "/run/named/session.key";
};


logging {
        channel default_debug {
                file "data/named.run";
                severity dynamic;
        };
};

zone "." IN {
	type hint;
	file "named.ca";
};

include "/etc/named.rfc1912.zones";
include "/etc/named.root.key";

2.3.3 配置区域配置文件

新建区域配置文件 /etc/named.rfc1912.zones

zone "host.com" IN {
        type master;
        file "host.com.zone";
        allow-update { 192.168.31.11; };
};

zone "od.com" IN {
        type master;
        file "od.com.zone";
        allow-update { 192.168.31.11; };
};

2.3.4 配置区域数据文件

2.3.4.1 新建区域数据文件 /var/named/host.com.zone

$ORIGIN host.com.
$TTL 600    ; 10 minutes
@   IN SOA  dns.host.com.  dnsadmin.host.com.  (
                 2020072401   ; serial
                 10800      ; refresh (3 hours)
                 900        ; retry (15 minutes)
                 604800     ; expire (1 week)
                 86400      ; minimun (1 day)
                 )
            NS  dns.host.com.
$TTL 60 ; 1 minute
dns              A      192.168.31.11
hdss200          A      192.168.31.200
hdss37          A       192.168.31.37
hdss40          A       192.168.31.40

2.3.4.2 新建区域数据文件 /var/named/od.com.zone

$ORIGIN od.com.
$TTL 600    ; 10 minutes
@   IN SOA  dns.od.com.  dnsadmin.od.com.  (
                 2020072401   ; serial
                 10800      ; refresh (3 hours)
                 900        ; retry (15 minutes)
                 604800     ; expire (1 week)
                 86400      ; minimun (1 day)
                 )
            NS  dns.od.com.
$TTL 60 ; 1 minute
dns                A      192.168.31.11
harbor             A      192.168.31.200

2.3.4.3 启动named服务

systemctl start named
systemctl enable named

2.3.4.4 验证dns服务是否可用

dig -t A hdss11.host.com @192.168.31.11 +short
dig -t A hdss200.host.com @192.168.31.11 +short
dig -t A dns.host.com @192.168.31.11 +short
dig -t A hdss40.host.com @192.168.31.11 +short
dig -t A dns.od.com @192.168.31.11 +short
dig -t A harbor.od.com @192.168.31.11 +short

2.3.5 设置本地dns服务（192.168.31.11）为客户端提供服务

192.168.31.11 / 192.168.31.37 / 192.168.31.38 / 192.168.31.39 / 192.168.31.40 / 192.168.31.200

sed -i 's/DNS1=192.168.31.2/DNS1=192.168.31.11/' /etc/sysconfig/network-scripts/ifcfg-eth0
systemctl restart network

验证dns

dig -t A hdss11.host.com @192.168.31.11 +short
dig -t A hdss200.host.com @192.168.31.11 +short
dig -t A dns.host.com @192.168.31.11 +short
dig -t A hdss40.host.com @192.168.31.11 +short
dig -t A dns.od.com @192.168.31.11 +short
dig -t A harbor.od.com @192.168.31.11 +short

ping baidu.com

2.3

2.4 部署docker环境

2.5.1 安装

yum -y install yum-utils device-mapper-persistent-data lvm2
yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
yum -y install docker-ce-18.06.3.ce

2.5.2 配置

mkdir /etc/docker
mkdir -p /data/docker
cat > /etc/docker/daemon.json <<EOF
{
"graph": "/data/docker",
"storage-driver": "overlay2",
"insecure-registries": ["registry.access.redhat.com", "quay.io", "harbor.od.com"],
"registry-mirrors": ["https://q2gr04ke.mirror.aliyuncs.com"],
"bip": "172.7.21.1/24",
"exec-opts": ["native.cgroupdriver=systemd"],
"live-restore": true
}
EOF

2.5.3 启动

systemctl start docker
systemctl enable docker

2.6 部署docker镜像仓库 harbor

hdss200.host.com（192.168.31.200）

2.6.1 安装docker-compose

https://docs.docker.com/compose/install/

while true;
do  
curl -L "https://github.com/docker/compose/releases/download/1.26.0/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose; 
if [[ $? -eq 0 ]];then 
break; 
fi; 
done

2.6.2 下载 harbor 1.10.3

从官网下载

https://github.com/goharbor/harbor/releases/download/v1.10.3/harbor-offline-installer-v1.10.3.tgz

2.6.3 使用nginx反向代理 harbor.od.com

使用域名 harbor.od.com 访问harbor

yum -y install nginx

配置虚拟主机 od.harbor.com.conf

server {
    listen 80;
    server_name harbor.od.com

    location / {
        proxy_pass http://127.0.0.1:180;
    }

}

启动nginx

systemctl start nginx
systemctl enable nginx

2.6.4 修改区域数据文件 /var/named/od.com.zone

192.168.31.11 上操作

$ORIGIN od.com.
$TTL 600    ; 10 minutes
@   IN SOA  dns.od.com.  dnsadmin.od.com.  (
                 2020072401   ; serial
                 10800      ; refresh (3 hours)
                 900        ; retry (15 minutes)
                 604800     ; expire (1 week)
                 86400      ; minimun (1 day)
                 )
            NS  dns.od.com.
$TTL 60 ; 1 minute
dns                A      192.168.31.11
harbor             A      192.168.31.200

重启named服务

systemctl restart named

dig -t A harbor.od.com +short

2.6.5 配置harbor

mkdir /opt/src
tar -xf harbor-offline-installer-v1.10.3.tgz -C /opt
mv /opt/harbor/ /opt/harbor-v1.10.3
ln -s /opt/harbor-v1.10.3/ /opt/harbor   # 便于以后版本的升级
cd /opt/harbor
./prepare

修改配置文件 harbor.yml

hostname: harbor.od.com

http:
  port: 180
  
data_volume: /data/harbor

log:
  level: info
  local:
    rotate_count: 50
    rotate_size: 200M
    location: /data/harbor/logs

创建目录 /data/harbor/logs

mkdir -p /data/harbor/logs

2.6.6 启动harbor

/opt/harbor/install.sh

docker ps

2.6.8 上传镜像

docker pull nginx:1.7.9
docker tag nginx:1.7.9 harbor.od.com/public/nginx:v1.7.9
docker login harbor.od.com
docker push harbor.od.com/public/nginx:v1.7.9

这个时候会有报错 413 Request Entity Too Large，解决方案是配置nginx主配置文件中最大上传文件的大小限制 ( client_max_body_size 50000m;)

vim /etc/nginx/nginx.conf
http {
    log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                      '$status $body_bytes_sent "$http_referer" '
                      '"$http_user_agent" "$http_x_forwarded_for"';

    access_log  /var/log/nginx/access.log  main;

    sendfile            on;
    tcp_nopush          on;
    tcp_nodelay         on;
    keepalive_timeout   65;
    types_hash_max_size 2048;
    client_max_body_size 50000m;
systemctl restart nginx

docker push harbor.od.com/public/nginx:v1.7.9

2.4 配置keepalived 和 haproxy

haproxy: 负载均衡

keepalived: 高可用, 每台机器上都起着 192.168.31.10 这个vip

主机名	IP地址
hdss37.host.com	192.168.31.37
hdss38.host.com	192.168.31.38
hdss39.host.com	192.168.31.39

2.4.1 配置haproxy

 yum -y install haproxy

vim /etc/haproxy/haproxy.cfg

global
    log         127.0.0.1 local2
    tune.ssl.default-dh-param 2048
    chroot      /var/lib/haproxy
    stats socket /var/lib/haproxy/stats
    pidfile     /var/run/haproxy.pid
    maxconn     4000
    #user        haproxy
    #group       haproxy
    daemon


#---------------------------------------------------------------------
# common defaults that all the 'listen' and 'backend' sections will
# use if not designated in their block
#---------------------------------------------------------------------
defaults
    log                     global
    retries                 3
    option                  redispatch
    stats                   uri /haproxy
    stats                   refresh 30s
    stats                   realm haproxy-status
    stats                   auth admin:dxInCtFianKkL]36
    stats                   hide-version
    maxconn                 65535
    timeout connect         5000
    timeout client          50000
    timeout server          50000
#---------------------------------------------------------------------
# main frontend which proxys to the backends
#---------------------------------------------------------------------
frontend kubernetes-apiserver
    mode		tcp
    bind		*:16443
    option		tcplog
    default_backend	kubernetes-apiserver

#---------------------------------------------------------------------
# static backend for serving up images, stylesheets and such
#---------------------------------------------------------------------
backend kubernetes-apiserver
    mode		tcp
    balance		roundrobin
    server		k8s-master01 192.168.31.37:6443 check
    server		k8s-master02 192.168.31.38:6443 check
    server		k8s-master02 192.168.31.39:6443 check

#---------------------------------------------------------------------
# round robin balancing between the various backends
#---------------------------------------------------------------------
listen stats
    bind		*:1080
    stats auth		admin:awesomePassword
    stats refresh	5s
    stats realm		HAProxy\ Statistics
    stats uri		/admin?stats

systemctl start haproxy.service 
systemctl enable haproxy.service

2.4.2 配置keepalived

yum -y install keepalived.x86_64

创建keepalived 监控端口脚本

vim /etc/keepalived/check_port.sh

#!/bin/bash
#keepalived 监控端口脚本
#使用方法：
#在keepalived的配置文件中
#vrrp_script check_port {#创建一个vrrp_script脚本,检查配置
#    script "/etc/keepalived/check_port.sh 6379" #配置监听的端口
#    interval 2 #检查脚本的频率,单位（秒）
#}
CHK_PORT=$1
if [ -n "$CHK_PORT" ];then
        PORT_PROCESS=`ss -lnt|grep $CHK_PORT|wc -l`
        if [ $PORT_PROCESS -eq 0 ];then
                echo "Port $CHK_PORT Is Not Used,End."
                exit 1
        fi
else
        echo "Check Port Cant Be Empty!"
fi

chmod +x /etc/keepalived/check_port.sh

编辑配置文件

vim /etc/keepalived/keepalived.conf

192.168.31.37

! Configuration File for keepalived

global_defs {
   router_id 192.168.31.37

}

vrrp_script chk_nginx {
    script "/etc/keepalived/check_port.sh 16443"
    interval 2
    weight 20
}

vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 251
    priority 100
    advert_int 1
    mcast_src_ip 192.168.31.37
    #nopreempt

    authentication {
        auth_type PASS
        auth_pass 11111111
    }
    track_script {
         chk_nginx
    }
    virtual_ipaddress {
        192.168.31.10
    }
}

注意！！！！ nopreempt 这个配置表示非抢占式，如果主keepalived节点（192.168.31.37）端口挂掉，则vip会飘到备keepalived节点（192.168.31.38），无论做什么操作， vip都不会回到主keepalived

192.168.31.38

! Configuration File for keepalived

global_defs {
   router_id 192.168.31.38

}

vrrp_script chk_nginx {
    script "/etc/keepalived/check_port.sh 16443"
    interval 2
    weight 20
}

vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 251
    priority 90
    advert_int 1
    mcast_src_ip 192.168.31.38

    authentication {
        auth_type PASS
        auth_pass 11111111
    }
    track_script {
         chk_nginx
    }
    virtual_ipaddress {
        192.168.31.10
    }
}

192.168.31.39

! Configuration File for keepalived

global_defs {
   router_id 192.168.31.39

}

vrrp_script chk_nginx {
    script "/etc/keepalived/check_port.sh 16443"
    interval 2
    weight 20
}

vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 251
    priority 80
    advert_int 1
    mcast_src_ip 192.168.31.39

    authentication {
        auth_type PASS
        auth_pass 11111111
    }
    track_script {
         chk_nginx
    }
    virtual_ipaddress {
        192.168.31.10
    }
}

启动服务

systemctl start keepalived.service 
systemctl enable keepalived.service

3. 部署k8s

3.1 安装kubeadm, kubectl, kubelet

cat <<EOF >/etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
yum -y install kubeadm-1.17.9 kubectl-1.17.9 kubelet-1.17.9

3.2 生成部署的yaml文件

kubeadm config print init-defaults > kubeadm-config.yaml

3.3 修改部署文件

apiVersion: kubeadm.k8s.io/v1beta2
kind: ClusterConfiguration
kubernetesVersion: v1.17.9
imageRepository: harbor.od.com/k8s
controlPlaneEndpoint: "192.168.31.10:16443"
apiServer:
  certSANs:
  - 192.168.31.37
  - 192.168.31.38
  - 192.168.31.39
networking:
  serviceSubnet: 10.47.0.0/16
---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind: KubeProxyConfiguration
featureGates:
  SupportIPVSProxyMode: true
mode: ipvs

3.4 执行部署

kubeadm init --config=kubeadm-config.yaml --upload-certs | tee kubeadm-init.log

第一遍部署会有报错提示下载镜像，下载相关镜像

docker pull registry.cn-shanghai.aliyuncs.com/giantswarm/kube-apiserver:1.17.9
docker pull registry.cn-shanghai.aliyuncs.com/giantswarm/kube-apiserver:v1.17.9
docker pull registry.cn-hangzhou.aliyuncs.com/kubernetes-service-catalog/kube-apiserver-amd64:v1.17.9
docker pull registry.cn-hangzhou.aliyuncs.com/kubernetes-service-catalog/kube-controller-manager-amd64:v1.17.9
docker pull registry.cn-hangzhou.aliyuncs.com/yayaw/kube-scheduler:v1.17.9
docker pull registry.cn-hangzhou.aliyuncs.com/kubernetes-service-catalog/kube-proxy-amd64:v1.17.9

docker tag registry.cn-hangzhou.aliyuncs.com/kubernetes-service-catalog/kube-proxy-amd64:v1.17.9 harbor.od.com/k8s/kube-proxy:v1.17.9
docker push harbor.od.com/k8s/kube-proxy:v1.17.9
docker tag registry.cn-hangzhou.aliyuncs.com/kubernetes-service-catalog/kube-apiserver-amd64:v1.17.9 harbor.od.com/k8s/kube-apiserver:v1.17.9
docker push harbor.od.com/k8s/kube-apiserver:v1.17.9
docker tag registry.cn-hangzhou.aliyuncs.com/kubernetes-service-catalog/kube-controller-manager-amd64:v1.17.9  harbor.od.com/k8s/kube-controller-manager:v1.17.9
docker push harbor.od.com/k8s/kube-controller-manager:v1.17.9
docker tag registry.cn-hangzhou.aliyuncs.com/yayaw/kube-scheduler:v1.17.9  harbor.od.com/k8s/kube-scheduler:v1.17.9
docker push harbor.od.com/k8s/kube-scheduler:v1.17.9
docker tag k8s.gcr.io/coredns:1.6.5 harbor.od.com/k8s/coredns:1.6.5
docker push harbor.od.com/k8s/coredns:1.6.5
docker tag k8s.gcr.io/etcd:3.4.3-0 harbor.od.com/k8s/etcd:3.4.3-0
docker push harbor.od.com/k8s/etcd:3.4.3-0
docker tag k8s.gcr.io/pause:3.1 harbor.od.com/k8s/pause:3.1
docker push harbor.od.com/k8s/pause:3.1
docker rmi registry.cn-hangzhou.aliyuncs.com/kubernetes-service-catalog/kube-proxy-amd64:v1.17.9
docker rmi registry.cn-hangzhou.aliyuncs.com/kubernetes-service-catalog/kube-controller-manager-amd64:v1.17.9
docker rmi registry.cn-hangzhou.aliyuncs.com/kubernetes-service-catalog/kube-apiserver-amd64:v1.17.9
docker rmi registry.cn-hangzhou.aliyuncs.com/yayaw/kube-scheduler:v1.17.9
docker rmi k8s.gcr.io/coredns:1.6.5
docker rmi k8s.gcr.io/etcd:3.4.3-0
docker rmi k8s.gcr.io/pause:3.1

再次部署

kubeadm init --config=kubeadm-config.yaml --upload-certs | tee kubeadm-init.log

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

3.5 部署calico网络

wget https://docs.projectcalico.org/v3.15/manifests/calico.yaml

下载相关镜像

docker pull calico/cni:v3.15.1
docker pull calico/node:v3.15.1
docker pull calico/kube-controllers:v3.15.1
docker pull calico/pod2daemon-flexvol:v3.15.1

docker tag calico/node:v3.15.1 harbor.od.com/k8s/calico/node:v3.15.1
docker push harbor.od.com/k8s/calico/node:v3.15.1
docker tag calico/pod2daemon-flexvol:v3.15.1 harbor.od.com/k8s/calico/pod2daemon-flexvol:v3.15.1
docker push harbor.od.com/k8s/calico/pod2daemon-flexvol:v3.15.1
docker tag calico/cni:v3.15.1 harbor.od.com/k8s/calico/cni:v3.15.1
docker push harbor.od.com/k8s/calico/cni:v3.15.1
docker tag calico/kube-controllers:v3.15.1 harbor.od.com/k8s/calico/kube-controllers:v3.15.1
docker push harbor.od.com/k8s/calico/kube-controllers:v3.15.1

将镜像地址改成本地镜像仓库地址，然后部署

kubectl create -f calico.yaml

posted @ 2020-07-29 21:43 cjw1219 阅读(488) 评论(0) 编辑收藏举报

刷新页面返回顶部

cjw1219

罗马不是一天建成的

k8s 1.17.9 部署

1. 实验架构

2 实验准备工作

2.1 准备虚拟机

2.2 配置基础环境

2.3 DNS服务初始化

2.3.1 安装bind

2.3.2 配置主配置文件

2.3.3 配置区域配置文件

2.3.4 配置区域数据文件

2.3.4.1 新建区域数据文件 /var/named/host.com.zone

2.3.4.2 新建区域数据文件 /var/named/od.com.zone

2.3.4.3 启动named服务

2.3.4.4 验证dns服务是否可用

2.3.5 设置本地dns服务（192.168.31.11）为客户端提供服务

2.4 部署docker环境

2.5.1 安装

2.5.2 配置

2.5.3 启动

2.6 部署docker镜像仓库 harbor

2.6.1 安装docker-compose

2.6.2 下载 harbor 1.10.3

2.6.3 使用nginx反向代理 harbor.od.com

2.6.4 修改区域数据文件 /var/named/od.com.zone

2.6.5 配置harbor

2.6.6 启动harbor

2.6.8 上传镜像

2.4 配置keepalived 和 haproxy

2.4.1 配置haproxy

2.4.2 配置keepalived

3. 部署k8s

3.1 安装kubeadm, kubectl, kubelet

3.2 生成部署的yaml文件

3.3 修改部署文件

3.4 执行部署

3.5 部署calico网络

公告

cjw1219

罗马不是一天建成的

k8s 1.17.9 部署

1. 实验架构

2 实验准备工作

2.1 准备虚拟机

2.2 配置基础环境

2.3 DNS服务初始化

2.3.1 安装bind

2.3.2 配置主配置文件

2.3.3 配置区域配置文件

2.3.4 配置区域数据文件

2.3.4.1 新建 区域数据文件 /var/named/host.com.zone

2.3.4.2 新建 区域数据文件 /var/named/od.com.zone

2.3.4.3 启动named服务

2.3.4.4 验证dns服务是否可用

2.3.5 设置本地dns服务（192.168.31.11）为客户端提供服务

2.4 部署docker环境

2.5.1 安装

2.5.2 配置

2.5.3 启动

2.6 部署docker镜像仓库 harbor

2.6.1 安装docker-compose

2.6.2 下载 harbor 1.10.3

2.6.3 使用nginx反向代理 harbor.od.com

2.6.4 修改区域数据文件 /var/named/od.com.zone

2.6.5 配置harbor

2.6.6 启动harbor

2.6.8 上传镜像

2.4 配置keepalived 和 haproxy

2.4.1 配置haproxy

2.4.2 配置keepalived

3. 部署k8s

3.1 安装kubeadm, kubectl, kubelet

3.2 生成部署的yaml文件

3.3 修改部署文件

3.4 执行部署

3.5 部署calico网络

公告

2.3.4.1 新建区域数据文件 /var/named/host.com.zone

2.3.4.2 新建区域数据文件 /var/named/od.com.zone