华为交换机S5700系列配置通过STelnet登录设备示例

配置通过STelnet登录设备示例

 

组网图形

图1 配置用户通过STelnet登录设备组网图 

在服务器端生成本地密钥对

<HUAWEI> system-view
[HUAWEI] sysname SSH_Server
[SSH_Server] dsa local-key-pair create
Info: The key name will be: HUAWEI_Host_DSA.                                                                              
Info: The key modulus can be any one of the following : 1024, 2048.                                                          
Info: If the key modulus is greater than 512, it may take a few minutes.      
Please input the modulus [default=2048]:                                      
Info: Generating keys...                                                      
Info: Succeeded in creating the DSA host keys.

# 配置允许用户登录设备的主机地址。

[Telnet_Server] acl 2001
[Telnet_Server-acl-basic-2001] rule permit source 10.1.1.1 0
[Telnet_Server-acl-basic-2001] quit
[Telnet_Server] user-interface vty 0 14
[Telnet_Server-ui-vty0-14] protocol inbound ssh
[Telnet_Server-ui-vty0-14] acl 2001 inbound

# 新建用户名为client001的SSH用户，且认证方式为Password。

[SSH_Server] aaa
[SSH_Server-aaa] local-user client001 password irreversible-cipher Huawei@123
[SSH_Server-aaa] local-user client001 privilege level 3
[SSH_Server-aaa] local-user client001 service-type ssh
[SSH_Server-aaa] quit
[SSH_Server] ssh user client001 authentication-type password

SSH服务器端开启STelnet服务功能

[SSH_Server] stelnet server enable

配置SSH用户client001的服务方式为STelnet

[SSH_Server] ssh user client001 service-type stelnet

 验证配置结果

# PC端client001用password认证方式连接SSH服务器。

# 通过PuTTY软件登录设备，输入设备的IP地址，选择协议类型为SSH。

图2 通过PuTTY软件用password认证方式连接SSH服务器示意图 

# 点击“Open”，出现如下界面，输入用户名和密码，并按Enter键，至此已登录到SSH服务器。（以下显示信息仅为示意）

login as: client001

Sent username "client001"


client001@10.137.217.203's password:


Info: The max number of VTY users is 8, and the number

      of current VTY users on line is 5.

      The current login time is 2012-08-06 09:35:28+00:00.

<SSH_Server>

配置文件

SSH_Server的配置文件

#

sysname SSH_Server

#

aaa

local-user client001 password irreversible-cipher $1a$aVW8S=aP=B<OWi1Bu'^R[=_!~oR*85r_nNY+kA(I}[TiLiVGR-i/'DFGAI-O$

local-user client001 privilege level 3

local-user client001 service-type ssh

#

stelnet server enable

ssh user client001

ssh user client001 authentication-type password

ssh user client001 service-type stelnet

#

user-interface vty 0 14

authentication-mode aaa

#

return