---
# Source: calico/templates/calico-kube-controllers.yaml
# This manifest creates a Pod Disruption Budget for Controller to allow K8s Cluster Autoscaler to evict
apiVersion: policy/v1
kind: PodDisruptionBudget
metadata:
name: calico-kube-controllers
namespace: kube-system
labels:
k8s-app: calico-kube-controllers
spec:
maxUnavailable: 1
selector:
matchLabels:
k8s-app: calico-kube-controllers
---
# Source: calico/templates/calico-kube-controllers.yaml
apiVersion: v1
kind: ServiceAccount
metadata:
name: calico-kube-controllers
namespace: kube-system
---
# Source: calico/templates/calico-node.yaml
apiVersion: v1
kind: ServiceAccount
metadata:
name: calico-node
namespace: kube-system
---
# Source: calico/templates/calico-node.yaml
apiVersion: v1
kind: ServiceAccount
metadata:
name: calico-cni-plugin
namespace: kube-system
---
# Source: calico/templates/calico-config.yaml
# This ConfigMap is used to configure a self-hosted Calico installation.
kind: ConfigMap
apiVersion: v1
metadata:
name: calico-config
namespace: kube-system
data:
# Typha is disabled.
typha_service_name: "none"
# Configure the backend to use.
calico_backend: "bird"
# Configure the MTU to use for workload interfaces and tunnels.
# By default, MTU is auto-detected, and explicitly setting this field should not be required.
# You can override auto-detection by providing a non-zero value.
veth_mtu: "0"
# The CNI network configuration to install on each node. The special
# values in this config will be automatically populated.
cni_network_config: |-
{
"name": "k8s-pod-network",
"cniVersion": "0.3.1",
"plugins": [
{
"type": "calico",
"log_level": "info",
"log_file_path": "/var/log/calico/cni/cni.log",
"datastore_type": "kubernetes",
"nodename": "__KUBERNETES_NODE_NAME__",
"mtu": __CNI_MTU__,
"ipam": {
"type": "calico-ipam"
},
"policy": {
"type": "k8s"
},
"kubernetes": {
"kubeconfig": "__KUBECONFIG_FILEPATH__"
}
},
{
"type": "portmap",
"snat": true,
"capabilities": {"portMappings": true}
},
{
"type": "bandwidth",
"capabilities": {"bandwidth": true}
}
]
}
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: bgpconfigurations.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: BGPConfiguration
listKind: BGPConfigurationList
plural: bgpconfigurations
singular: bgpconfiguration
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
description: BGPConfiguration contains the configuration for any BGP routing.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: BGPConfigurationSpec contains the values of the BGP configuration.
properties:
asNumber:
description: 'ASNumber is the default AS number used by a node. [Default:
64512]'
format: int32
type: integer
bindMode:
description: BindMode indicates whether to listen for BGP connections
on all addresses (None) or only on the node's canonical IP address
Node.Spec.BGP.IPvXAddress (NodeIP). Default behaviour is to listen
for BGP connections on all addresses.
type: string
communities:
description: Communities is a list of BGP community values and their
arbitrary names for tagging routes.
items:
description: Community contains standard or large community value
and its name.
properties:
name:
description: Name given to community value.
type: string
value:
description: Value must be of format `aa:nn` or `aa:nn:mm`.
For standard community use `aa:nn` format, where `aa` and
`nn` are 16 bit number. For large community use `aa:nn:mm`
format, where `aa`, `nn` and `mm` are 32 bit number. Where,
`aa` is an AS Number, `nn` and `mm` are per-AS identifier.
pattern: ^(\d+):(\d+)$|^(\d+):(\d+):(\d+)$
type: string
type: object
type: array
ignoredInterfaces:
description: IgnoredInterfaces indicates the network interfaces that
needs to be excluded when reading device routes.
items:
type: string
type: array
listenPort:
description: ListenPort is the port where BGP protocol should listen.
Defaults to 179
maximum: 65535
minimum: 1
type: integer
logSeverityScreen:
description: 'LogSeverityScreen is the log severity above which logs
are sent to the stdout. [Default: INFO]'
type: string
nodeMeshMaxRestartTime:
description: Time to allow for software restart for node-to-mesh peerings. When
specified, this is configured as the graceful restart timeout. When
not specified, the BIRD default of 120s is used. This field can
only be set on the default BGPConfiguration instance and requires
that NodeMesh is enabled
type: string
nodeMeshPassword:
description: Optional BGP password for full node-to-mesh peerings.
This field can only be set on the default BGPConfiguration instance
and requires that NodeMesh is enabled
properties:
secretKeyRef:
description: Selects a key of a secret in the node pod's namespace.
properties:
key:
description: The key of the secret to select from. Must be
a valid secret key.
type: string
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind, uid?'
type: string
optional:
description: Specify whether the Secret or its key must be
defined
type: boolean
required:
- key
type: object
type: object
nodeToNodeMeshEnabled:
description: 'NodeToNodeMeshEnabled sets whether full node to node
BGP mesh is enabled. [Default: true]'
type: boolean
prefixAdvertisements:
description: PrefixAdvertisements contains per-prefix advertisement
configuration.
items:
description: PrefixAdvertisement configures advertisement properties
for the specified CIDR.
properties:
cidr:
description: CIDR for which properties should be advertised.
type: string
communities:
description: Communities can be list of either community names
already defined in `Specs.Communities` or community value
of format `aa:nn` or `aa:nn:mm`. For standard community use
`aa:nn` format, where `aa` and `nn` are 16 bit number. For
large community use `aa:nn:mm` format, where `aa`, `nn` and
`mm` are 32 bit number. Where,`aa` is an AS Number, `nn` and
`mm` are per-AS identifier.
items:
type: string
type: array
type: object
type: array
serviceClusterIPs:
description: ServiceClusterIPs are the CIDR blocks from which service
cluster IPs are allocated. If specified, Calico will advertise these
blocks, as well as any cluster IPs within them.
items:
description: ServiceClusterIPBlock represents a single allowed ClusterIP
CIDR block.
properties:
cidr:
type: string
type: object
type: array
serviceExternalIPs:
description: ServiceExternalIPs are the CIDR blocks for Kubernetes
Service External IPs. Kubernetes Service ExternalIPs will only be
advertised if they are within one of these blocks.
items:
description: ServiceExternalIPBlock represents a single allowed
External IP CIDR block.
properties:
cidr:
type: string
type: object
type: array
serviceLoadBalancerIPs:
description: ServiceLoadBalancerIPs are the CIDR blocks for Kubernetes
Service LoadBalancer IPs. Kubernetes Service status.LoadBalancer.Ingress
IPs will only be advertised if they are within one of these blocks.
items:
description: ServiceLoadBalancerIPBlock represents a single allowed
LoadBalancer IP CIDR block.
properties:
cidr:
type: string
type: object
type: array
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
annotations:
controller-gen.kubebuilder.io/version: (devel)
creationTimestamp: null
name: bgpfilters.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: BGPFilter
listKind: BGPFilterList
plural: bgpfilters
singular: bgpfilter
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: BGPFilterSpec contains the IPv4 and IPv6 filter rules of
the BGP Filter.
properties:
exportV4:
description: The ordered set of IPv4 BGPFilter rules acting on exporting
routes to a peer.
items:
description: BGPFilterRuleV4 defines a BGP filter rule consisting
a single IPv4 CIDR block and a filter action for this CIDR.
properties:
action:
type: string
cidr:
type: string
matchOperator:
type: string
required:
- action
- cidr
- matchOperator
type: object
type: array
exportV6:
description: The ordered set of IPv6 BGPFilter rules acting on exporting
routes to a peer.
items:
description: BGPFilterRuleV6 defines a BGP filter rule consisting
a single IPv6 CIDR block and a filter action for this CIDR.
properties:
action:
type: string
cidr:
type: string
matchOperator:
type: string
required:
- action
- cidr
- matchOperator
type: object
type: array
importV4:
description: The ordered set of IPv4 BGPFilter rules acting on importing
routes from a peer.
items:
description: BGPFilterRuleV4 defines a BGP filter rule consisting
a single IPv4 CIDR block and a filter action for this CIDR.
properties:
action:
type: string
cidr:
type: string
matchOperator:
type: string
required:
- action
- cidr
- matchOperator
type: object
type: array
importV6:
description: The ordered set of IPv6 BGPFilter rules acting on importing
routes from a peer.
items:
description: BGPFilterRuleV6 defines a BGP filter rule consisting
a single IPv6 CIDR block and a filter action for this CIDR.
properties:
action:
type: string
cidr:
type: string
matchOperator:
type: string
required:
- action
- cidr
- matchOperator
type: object
type: array
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: bgppeers.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: BGPPeer
listKind: BGPPeerList
plural: bgppeers
singular: bgppeer
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: BGPPeerSpec contains the specification for a BGPPeer resource.
properties:
asNumber:
description: The AS Number of the peer.
format: int32
type: integer
filters:
description: The ordered set of BGPFilters applied on this BGP peer.
items:
type: string
type: array
keepOriginalNextHop:
description: Option to keep the original nexthop field when routes
are sent to a BGP Peer. Setting "true" configures the selected BGP
Peers node to use the "next hop keep;" instead of "next hop self;"(default)
in the specific branch of the Node on "bird.cfg".
type: boolean
maxRestartTime:
description: Time to allow for software restart. When specified,
this is configured as the graceful restart timeout. When not specified,
the BIRD default of 120s is used.
type: string
node:
description: The node name identifying the Calico node instance that
is targeted by this peer. If this is not set, and no nodeSelector
is specified, then this BGP peer selects all nodes in the cluster.
type: string
nodeSelector:
description: Selector for the nodes that should have this peering. When
this is set, the Node field must be empty.
type: string
numAllowedLocalASNumbers:
description: Maximum number of local AS numbers that are allowed in
the AS path for received routes. This removes BGP loop prevention
and should only be used if absolutely necesssary.
format: int32
type: integer
password:
description: Optional BGP password for the peerings generated by this
BGPPeer resource.
properties:
secretKeyRef:
description: Selects a key of a secret in the node pod's namespace.
properties:
key:
description: The key of the secret to select from. Must be
a valid secret key.
type: string
name:
description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
TODO: Add other useful fields. apiVersion, kind, uid?'
type: string
optional:
description: Specify whether the Secret or its key must be
defined
type: boolean
required:
- key
type: object
type: object
peerIP:
description: The IP address of the peer followed by an optional port
number to peer with. If port number is given, format should be `[<IPv6>]:port`
or `<IPv4>:<port>` for IPv4. If optional port number is not set,
and this peer IP and ASNumber belongs to a calico/node with ListenPort
set in BGPConfiguration, then we use that port to peer.
type: string
peerSelector:
description: Selector for the remote nodes to peer with. When this
is set, the PeerIP and ASNumber fields must be empty. For each
peering between the local node and selected remote nodes, we configure
an IPv4 peering if both ends have NodeBGPSpec.IPv4Address specified,
and an IPv6 peering if both ends have NodeBGPSpec.IPv6Address specified. The
remote AS number comes from the remote node's NodeBGPSpec.ASNumber,
or the global default if that is not set.
type: string
reachableBy:
description: Add an exact, i.e. /32, static route toward peer IP in
order to prevent route flapping. ReachableBy contains the address
of the gateway which peer can be reached by.
type: string
sourceAddress:
description: Specifies whether and how to configure a source address
for the peerings generated by this BGPPeer resource. Default value
"UseNodeIP" means to configure the node IP as the source address. "None"
means not to configure a source address.
type: string
ttlSecurity:
description: TTLSecurity enables the generalized TTL security mechanism
(GTSM) which protects against spoofed packets by ignoring received
packets with a smaller than expected TTL value. The provided value
is the number of hops (edges) between the peers.
type: integer
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: blockaffinities.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: BlockAffinity
listKind: BlockAffinityList
plural: blockaffinities
singular: blockaffinity
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: BlockAffinitySpec contains the specification for a BlockAffinity
resource.
properties:
cidr:
type: string
deleted:
description: Deleted indicates that this block affinity is being deleted.
This field is a string for compatibility with older releases that
mistakenly treat this field as a string.
type: string
node:
type: string
state:
type: string
required:
- cidr
- deleted
- node
- state
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
annotations:
controller-gen.kubebuilder.io/version: (devel)
creationTimestamp: null
name: caliconodestatuses.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: CalicoNodeStatus
listKind: CalicoNodeStatusList
plural: caliconodestatuses
singular: caliconodestatus
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: CalicoNodeStatusSpec contains the specification for a CalicoNodeStatus
resource.
properties:
classes:
description: Classes declares the types of information to monitor
for this calico/node, and allows for selective status reporting
about certain subsets of information.
items:
type: string
type: array
node:
description: The node name identifies the Calico node instance for
node status.
type: string
updatePeriodSeconds:
description: UpdatePeriodSeconds is the period at which CalicoNodeStatus
should be updated. Set to 0 to disable CalicoNodeStatus refresh.
Maximum update period is one day.
format: int32
type: integer
type: object
status:
description: CalicoNodeStatusStatus defines the observed state of CalicoNodeStatus.
No validation needed for status since it is updated by Calico.
properties:
agent:
description: Agent holds agent status on the node.
properties:
birdV4:
description: BIRDV4 represents the latest observed status of bird4.
properties:
lastBootTime:
description: LastBootTime holds the value of lastBootTime
from bird.ctl output.
type: string
lastReconfigurationTime:
description: LastReconfigurationTime holds the value of lastReconfigTime
from bird.ctl output.
type: string
routerID:
description: Router ID used by bird.
type: string
state:
description: The state of the BGP Daemon.
type: string
version:
description: Version of the BGP daemon
type: string
type: object
birdV6:
description: BIRDV6 represents the latest observed status of bird6.
properties:
lastBootTime:
description: LastBootTime holds the value of lastBootTime
from bird.ctl output.
type: string
lastReconfigurationTime:
description: LastReconfigurationTime holds the value of lastReconfigTime
from bird.ctl output.
type: string
routerID:
description: Router ID used by bird.
type: string
state:
description: The state of the BGP Daemon.
type: string
version:
description: Version of the BGP daemon
type: string
type: object
type: object
bgp:
description: BGP holds node BGP status.
properties:
numberEstablishedV4:
description: The total number of IPv4 established bgp sessions.
type: integer
numberEstablishedV6:
description: The total number of IPv6 established bgp sessions.
type: integer
numberNotEstablishedV4:
description: The total number of IPv4 non-established bgp sessions.
type: integer
numberNotEstablishedV6:
description: The total number of IPv6 non-established bgp sessions.
type: integer
peersV4:
description: PeersV4 represents IPv4 BGP peers status on the node.
items:
description: CalicoNodePeer contains the status of BGP peers
on the node.
properties:
peerIP:
description: IP address of the peer whose condition we are
reporting.
type: string
since:
description: Since the state or reason last changed.
type: string
state:
description: State is the BGP session state.
type: string
type:
description: Type indicates whether this peer is configured
via the node-to-node mesh, or via en explicit global or
per-node BGPPeer object.
type: string
type: object
type: array
peersV6:
description: PeersV6 represents IPv6 BGP peers status on the node.
items:
description: CalicoNodePeer contains the status of BGP peers
on the node.
properties:
peerIP:
description: IP address of the peer whose condition we are
reporting.
type: string
since:
description: Since the state or reason last changed.
type: string
state:
description: State is the BGP session state.
type: string
type:
description: Type indicates whether this peer is configured
via the node-to-node mesh, or via en explicit global or
per-node BGPPeer object.
type: string
type: object
type: array
required:
- numberEstablishedV4
- numberEstablishedV6
- numberNotEstablishedV4
- numberNotEstablishedV6
type: object
lastUpdated:
description: LastUpdated is a timestamp representing the server time
when CalicoNodeStatus object last updated. It is represented in
RFC3339 form and is in UTC.
format: date-time
nullable: true
type: string
routes:
description: Routes reports routes known to the Calico BGP daemon
on the node.
properties:
routesV4:
description: RoutesV4 represents IPv4 routes on the node.
items:
description: CalicoNodeRoute contains the status of BGP routes
on the node.
properties:
destination:
description: Destination of the route.
type: string
gateway:
description: Gateway for the destination.
type: string
interface:
description: Interface for the destination
type: string
learnedFrom:
description: LearnedFrom contains information regarding
where this route originated.
properties:
peerIP:
description: If sourceType is NodeMesh or BGPPeer, IP
address of the router that sent us this route.
type: string
sourceType:
description: Type of the source where a route is learned
from.
type: string
type: object
type:
description: Type indicates if the route is being used for
forwarding or not.
type: string
type: object
type: array
routesV6:
description: RoutesV6 represents IPv6 routes on the node.
items:
description: CalicoNodeRoute contains the status of BGP routes
on the node.
properties:
destination:
description: Destination of the route.
type: string
gateway:
description: Gateway for the destination.
type: string
interface:
description: Interface for the destination
type: string
learnedFrom:
description: LearnedFrom contains information regarding
where this route originated.
properties:
peerIP:
description: If sourceType is NodeMesh or BGPPeer, IP
address of the router that sent us this route.
type: string
sourceType:
description: Type of the source where a route is learned
from.
type: string
type: object
type:
description: Type indicates if the route is being used for
forwarding or not.
type: string
type: object
type: array
type: object
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: clusterinformations.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: ClusterInformation
listKind: ClusterInformationList
plural: clusterinformations
singular: clusterinformation
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
description: ClusterInformation contains the cluster specific information.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: ClusterInformationSpec contains the values of describing
the cluster.
properties:
calicoVersion:
description: CalicoVersion is the version of Calico that the cluster
is running
type: string
clusterGUID:
description: ClusterGUID is the GUID of the cluster
type: string
clusterType:
description: ClusterType describes the type of the cluster
type: string
datastoreReady:
description: DatastoreReady is used during significant datastore migrations
to signal to components such as Felix that it should wait before
accessing the datastore.
type: boolean
variant:
description: Variant declares which variant of Calico should be active.
type: string
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: felixconfigurations.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: FelixConfiguration
listKind: FelixConfigurationList
plural: felixconfigurations
singular: felixconfiguration
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
description: Felix Configuration contains the configuration for Felix.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: FelixConfigurationSpec contains the values of the Felix configuration.
properties:
allowIPIPPacketsFromWorkloads:
description: 'AllowIPIPPacketsFromWorkloads controls whether Felix
will add a rule to drop IPIP encapsulated traffic from workloads
[Default: false]'
type: boolean
allowVXLANPacketsFromWorkloads:
description: 'AllowVXLANPacketsFromWorkloads controls whether Felix
will add a rule to drop VXLAN encapsulated traffic from workloads
[Default: false]'
type: boolean
awsSrcDstCheck:
description: 'Set source-destination-check on AWS EC2 instances. Accepted
value must be one of "DoNothing", "Enable" or "Disable". [Default:
DoNothing]'
enum:
- DoNothing
- Enable
- Disable
type: string
bpfConnectTimeLoadBalancingEnabled:
description: 'BPFConnectTimeLoadBalancingEnabled when in BPF mode,
controls whether Felix installs the connection-time load balancer. The
connect-time load balancer is required for the host to be able to
reach Kubernetes services and it improves the performance of pod-to-service
connections. The only reason to disable it is for debugging purposes. [Default:
true]'
type: boolean
bpfDSROptoutCIDRs:
description: BPFDSROptoutCIDRs is a list of CIDRs which are excluded
from DSR. That is, clients in those CIDRs will accesses nodeports
as if BPFExternalServiceMode was set to Tunnel.
items:
type: string
type: array
bpfDataIfacePattern:
description: BPFDataIfacePattern is a regular expression that controls
which interfaces Felix should attach BPF programs to in order to
catch traffic to/from the network. This needs to match the interfaces
that Calico workload traffic flows over as well as any interfaces
that handle incoming traffic to nodeports and services from outside
the cluster. It should not match the workload interfaces (usually
named cali...).
type: string
bpfDisableUnprivileged:
description: 'BPFDisableUnprivileged, if enabled, Felix sets the kernel.unprivileged_bpf_disabled
sysctl to disable unprivileged use of BPF. This ensures that unprivileged
users cannot access Calico''s BPF maps and cannot insert their own
BPF programs to interfere with Calico''s. [Default: true]'
type: boolean
bpfEnabled:
description: 'BPFEnabled, if enabled Felix will use the BPF dataplane.
[Default: false]'
type: boolean
bpfEnforceRPF:
description: 'BPFEnforceRPF enforce strict RPF on all host interfaces
with BPF programs regardless of what is the per-interfaces or global
setting. Possible values are Disabled, Strict or Loose. [Default:
Loose]'
type: string
bpfExtToServiceConnmark:
description: 'BPFExtToServiceConnmark in BPF mode, control a 32bit
mark that is set on connections from an external client to a local
service. This mark allows us to control how packets of that connection
are routed within the host and how is routing interpreted by RPF
check. [Default: 0]'
type: integer
bpfExternalServiceMode:
description: 'BPFExternalServiceMode in BPF mode, controls how connections
from outside the cluster to services (node ports and cluster IPs)
are forwarded to remote workloads. If set to "Tunnel" then both
request and response traffic is tunneled to the remote node. If
set to "DSR", the request traffic is tunneled but the response traffic
is sent directly from the remote node. In "DSR" mode, the remote
node appears to use the IP of the ingress node; this requires a
permissive L2 network. [Default: Tunnel]'
type: string
bpfHostConntrackBypass:
description: 'BPFHostConntrackBypass Controls whether to bypass Linux
conntrack in BPF mode for workloads and services. [Default: true
- bypass Linux conntrack]'
type: boolean
bpfKubeProxyEndpointSlicesEnabled:
description: BPFKubeProxyEndpointSlicesEnabled in BPF mode, controls
whether Felix's embedded kube-proxy accepts EndpointSlices or not.
type: boolean
bpfKubeProxyIptablesCleanupEnabled:
description: 'BPFKubeProxyIptablesCleanupEnabled, if enabled in BPF
mode, Felix will proactively clean up the upstream Kubernetes kube-proxy''s
iptables chains. Should only be enabled if kube-proxy is not running. [Default:
true]'
type: boolean
bpfKubeProxyMinSyncPeriod:
description: 'BPFKubeProxyMinSyncPeriod, in BPF mode, controls the
minimum time between updates to the dataplane for Felix''s embedded
kube-proxy. Lower values give reduced set-up latency. Higher values
reduce Felix CPU usage by batching up more work. [Default: 1s]'
type: string
bpfL3IfacePattern:
description: BPFL3IfacePattern is a regular expression that allows
to list tunnel devices like wireguard or vxlan (i.e., L3 devices)
in addition to BPFDataIfacePattern. That is, tunnel interfaces not
created by Calico, that Calico workload traffic flows over as well
as any interfaces that handle incoming traffic to nodeports and
services from outside the cluster.
type: string
bpfLogLevel:
description: 'BPFLogLevel controls the log level of the BPF programs
when in BPF dataplane mode. One of "Off", "Info", or "Debug". The
logs are emitted to the BPF trace pipe, accessible with the command
`tc exec bpf debug`. [Default: Off].'
type: string
bpfMapSizeConntrack:
description: 'BPFMapSizeConntrack sets the size for the conntrack
map. This map must be large enough to hold an entry for each active
connection. Warning: changing the size of the conntrack map can
cause disruption.'
type: integer
bpfMapSizeIPSets:
description: BPFMapSizeIPSets sets the size for ipsets map. The IP
sets map must be large enough to hold an entry for each endpoint
matched by every selector in the source/destination matches in network
policy. Selectors such as "all()" can result in large numbers of
entries (one entry per endpoint in that case).
type: integer
bpfMapSizeIfState:
description: BPFMapSizeIfState sets the size for ifstate map. The
ifstate map must be large enough to hold an entry for each device
(host + workloads) on a host.
type: integer
bpfMapSizeNATAffinity:
type: integer
bpfMapSizeNATBackend:
description: BPFMapSizeNATBackend sets the size for nat back end map.
This is the total number of endpoints. This is mostly more than
the size of the number of services.
type: integer
bpfMapSizeNATFrontend:
description: BPFMapSizeNATFrontend sets the size for nat front end
map. FrontendMap should be large enough to hold an entry for each
nodeport, external IP and each port in each service.
type: integer
bpfMapSizeRoute:
description: BPFMapSizeRoute sets the size for the routes map. The
routes map should be large enough to hold one entry per workload
and a handful of entries per host (enough to cover its own IPs and
tunnel IPs).
type: integer
bpfPSNATPorts:
anyOf:
- type: integer
- type: string
description: 'BPFPSNATPorts sets the range from which we randomly
pick a port if there is a source port collision. This should be
within the ephemeral range as defined by RFC 6056 (1024–65535) and
preferably outside the ephemeral ranges used by common operating
systems. Linux uses 32768–60999, while others mostly use the IANA
defined range 49152–65535. It is not necessarily a problem if this
range overlaps with the operating systems. Both ends of the range
are inclusive. [Default: 20000:29999]'
pattern: ^.*
x-kubernetes-int-or-string: true
bpfPolicyDebugEnabled:
description: BPFPolicyDebugEnabled when true, Felix records detailed
information about the BPF policy programs, which can be examined
with the calico-bpf command-line tool.
type: boolean
chainInsertMode:
description: 'ChainInsertMode controls whether Felix hooks the kernel''s
top-level iptables chains by inserting a rule at the top of the
chain or by appending a rule at the bottom. insert is the safe default
since it prevents Calico''s rules from being bypassed. If you switch
to append mode, be sure that the other rules in the chains signal
acceptance by falling through to the Calico rules, otherwise the
Calico policy will be bypassed. [Default: insert]'
type: string
dataplaneDriver:
description: DataplaneDriver filename of the external dataplane driver
to use. Only used if UseInternalDataplaneDriver is set to false.
type: string
dataplaneWatchdogTimeout:
description: "DataplaneWatchdogTimeout is the readiness/liveness timeout
used for Felix's (internal) dataplane driver. Increase this value
if you experience spurious non-ready or non-live events when Felix
is under heavy load. Decrease the value to get felix to report non-live
or non-ready more quickly. [Default: 90s] \n Deprecated: replaced
by the generic HealthTimeoutOverrides."
type: string
debugDisableLogDropping:
type: boolean
debugMemoryProfilePath:
type: string
debugSimulateCalcGraphHangAfter:
type: string
debugSimulateDataplaneHangAfter:
type: string
defaultEndpointToHostAction:
description: 'DefaultEndpointToHostAction controls what happens to
traffic that goes from a workload endpoint to the host itself (after
the traffic hits the endpoint egress policy). By default Calico
blocks traffic from workload endpoints to the host itself with an
iptables "DROP" action. If you want to allow some or all traffic
from endpoint to host, set this parameter to RETURN or ACCEPT. Use
RETURN if you have your own rules in the iptables "INPUT" chain;
Calico will insert its rules at the top of that chain, then "RETURN"
packets to the "INPUT" chain once it has completed processing workload
endpoint egress policy. Use ACCEPT to unconditionally accept packets
from workloads after processing workload endpoint egress policy.
[Default: Drop]'
type: string
deviceRouteProtocol:
description: This defines the route protocol added to programmed device
routes, by default this will be RTPROT_BOOT when left blank.
type: integer
deviceRouteSourceAddress:
description: This is the IPv4 source address to use on programmed
device routes. By default the source address is left blank, leaving
the kernel to choose the source address used.
type: string
deviceRouteSourceAddressIPv6:
description: This is the IPv6 source address to use on programmed
device routes. By default the source address is left blank, leaving
the kernel to choose the source address used.
type: string
disableConntrackInvalidCheck:
type: boolean
endpointReportingDelay:
type: string
endpointReportingEnabled:
type: boolean
externalNodesList:
description: ExternalNodesCIDRList is a list of CIDR's of external-non-calico-nodes
which may source tunnel traffic and have the tunneled traffic be
accepted at calico nodes.
items:
type: string
type: array
failsafeInboundHostPorts:
description: 'FailsafeInboundHostPorts is a list of UDP/TCP ports
and CIDRs that Felix will allow incoming traffic to host endpoints
on irrespective of the security policy. This is useful to avoid
accidentally cutting off a host with incorrect configuration. For
back-compatibility, if the protocol is not specified, it defaults
to "tcp". If a CIDR is not specified, it will allow traffic from
all addresses. To disable all inbound host ports, use the value
none. The default value allows ssh access and DHCP. [Default: tcp:22,
udp:68, tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666, tcp:6667]'
items:
description: ProtoPort is combination of protocol, port, and CIDR.
Protocol and port must be specified.
properties:
net:
type: string
port:
type: integer
protocol:
type: string
required:
- port
- protocol
type: object
type: array
failsafeOutboundHostPorts:
description: 'FailsafeOutboundHostPorts is a list of UDP/TCP ports
and CIDRs that Felix will allow outgoing traffic from host endpoints
to irrespective of the security policy. This is useful to avoid
accidentally cutting off a host with incorrect configuration. For
back-compatibility, if the protocol is not specified, it defaults
to "tcp". If a CIDR is not specified, it will allow traffic from
all addresses. To disable all outbound host ports, use the value
none. The default value opens etcd''s standard ports to ensure that
Felix does not get cut off from etcd as well as allowing DHCP and
DNS. [Default: tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666,
tcp:6667, udp:53, udp:67]'
items:
description: ProtoPort is combination of protocol, port, and CIDR.
Protocol and port must be specified.
properties:
net:
type: string
port:
type: integer
protocol:
type: string
required:
- port
- protocol
type: object
type: array
featureDetectOverride:
description: FeatureDetectOverride is used to override feature detection
based on auto-detected platform capabilities. Values are specified
in a comma separated list with no spaces, example; "SNATFullyRandom=true,MASQFullyRandom=false,RestoreSupportsLock=". "true"
or "false" will force the feature, empty or omitted values are auto-detected.
type: string
featureGates:
description: FeatureGates is used to enable or disable tech-preview
Calico features. Values are specified in a comma separated list
with no spaces, example; "BPFConnectTimeLoadBalancingWorkaround=enabled,XyZ=false".
This is used to enable features that are not fully production ready.
type: string
floatingIPs:
description: FloatingIPs configures whether or not Felix will program
non-OpenStack floating IP addresses. (OpenStack-derived floating
IPs are always programmed, regardless of this setting.)
enum:
- Enabled
- Disabled
type: string
genericXDPEnabled:
description: 'GenericXDPEnabled enables Generic XDP so network cards
that don''t support XDP offload or driver modes can use XDP. This
is not recommended since it doesn''t provide better performance
than iptables. [Default: false]'
type: boolean
healthEnabled:
type: boolean
healthHost:
type: string
healthPort:
type: integer
healthTimeoutOverrides:
description: HealthTimeoutOverrides allows the internal watchdog timeouts
of individual subcomponents to be overridden. This is useful for
working around "false positive" liveness timeouts that can occur
in particularly stressful workloads or if CPU is constrained. For
a list of active subcomponents, see Felix's logs.
items:
properties:
name:
type: string
timeout:
type: string
required:
- name
- timeout
type: object
type: array
interfaceExclude:
description: 'InterfaceExclude is a comma-separated list of interfaces
that Felix should exclude when monitoring for host endpoints. The
default value ensures that Felix ignores Kubernetes'' IPVS dummy
interface, which is used internally by kube-proxy. If you want to
exclude multiple interface names using a single value, the list
supports regular expressions. For regular expressions you must wrap
the value with ''/''. For example having values ''/^kube/,veth1''
will exclude all interfaces that begin with ''kube'' and also the
interface ''veth1''. [Default: kube-ipvs0]'
type: string
interfacePrefix:
description: 'InterfacePrefix is the interface name prefix that identifies
workload endpoints and so distinguishes them from host endpoint
interfaces. Note: in environments other than bare metal, the orchestrators
configure this appropriately. For example our Kubernetes and Docker
integrations set the ''cali'' value, and our OpenStack integration
sets the ''tap'' value. [Default: cali]'
type: string
interfaceRefreshInterval:
description: InterfaceRefreshInterval is the period at which Felix
rescans local interfaces to verify their state. The rescan can be
disabled by setting the interval to 0.
type: string
ipipEnabled:
description: 'IPIPEnabled overrides whether Felix should configure
an IPIP interface on the host. Optional as Felix determines this
based on the existing IP pools. [Default: nil (unset)]'
type: boolean
ipipMTU:
description: 'IPIPMTU is the MTU to set on the tunnel device. See
Configuring MTU [Default: 1440]'
type: integer
ipsetsRefreshInterval:
description: 'IpsetsRefreshInterval is the period at which Felix re-checks
all iptables state to ensure that no other process has accidentally
broken Calico''s rules. Set to 0 to disable iptables refresh. [Default:
90s]'
type: string
iptablesBackend:
description: IptablesBackend specifies which backend of iptables will
be used. The default is Auto.
type: string
iptablesFilterAllowAction:
type: string
iptablesFilterDenyAction:
description: IptablesFilterDenyAction controls what happens to traffic
that is denied by network policy. By default Calico blocks traffic
with an iptables "DROP" action. If you want to use "REJECT" action
instead you can configure it in here.
type: string
iptablesLockFilePath:
description: 'IptablesLockFilePath is the location of the iptables
lock file. You may need to change this if the lock file is not in
its standard location (for example if you have mapped it into Felix''s
container at a different path). [Default: /run/xtables.lock]'
type: string
iptablesLockProbeInterval:
description: 'IptablesLockProbeInterval is the time that Felix will
wait between attempts to acquire the iptables lock if it is not
available. Lower values make Felix more responsive when the lock
is contended, but use more CPU. [Default: 50ms]'
type: string
iptablesLockTimeout:
description: 'IptablesLockTimeout is the time that Felix will wait
for the iptables lock, or 0, to disable. To use this feature, Felix
must share the iptables lock file with all other processes that
also take the lock. When running Felix inside a container, this
requires the /run directory of the host to be mounted into the calico/node
or calico/felix container. [Default: 0s disabled]'
type: string
iptablesMangleAllowAction:
type: string
iptablesMarkMask:
description: 'IptablesMarkMask is the mask that Felix selects its
IPTables Mark bits from. Should be a 32 bit hexadecimal number with
at least 8 bits set, none of which clash with any other mark bits
in use on the system. [Default: 0xff000000]'
format: int32
type: integer
iptablesNATOutgoingInterfaceFilter:
type: string
iptablesPostWriteCheckInterval:
description: 'IptablesPostWriteCheckInterval is the period after Felix
has done a write to the dataplane that it schedules an extra read
back in order to check the write was not clobbered by another process.
This should only occur if another application on the system doesn''t
respect the iptables lock. [Default: 1s]'
type: string
iptablesRefreshInterval:
description: 'IptablesRefreshInterval is the period at which Felix
re-checks the IP sets in the dataplane to ensure that no other process
has accidentally broken Calico''s rules. Set to 0 to disable IP
sets refresh. Note: the default for this value is lower than the
other refresh intervals as a workaround for a Linux kernel bug that
was fixed in kernel version 4.11. If you are using v4.11 or greater
you may want to set this to, a higher value to reduce Felix CPU
usage. [Default: 10s]'
type: string
ipv6Support:
description: IPv6Support controls whether Felix enables support for
IPv6 (if supported by the in-use dataplane).
type: boolean
kubeNodePortRanges:
description: 'KubeNodePortRanges holds list of port ranges used for
service node ports. Only used if felix detects kube-proxy running
in ipvs mode. Felix uses these ranges to separate host and workload
traffic. [Default: 30000:32767].'
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
logDebugFilenameRegex:
description: LogDebugFilenameRegex controls which source code files
have their Debug log output included in the logs. Only logs from
files with names that match the given regular expression are included. The
filter only applies to Debug level logs.
type: string
logFilePath:
description: 'LogFilePath is the full path to the Felix log. Set to
none to disable file logging. [Default: /var/log/calico/felix.log]'
type: string
logPrefix:
description: 'LogPrefix is the log prefix that Felix uses when rendering
LOG rules. [Default: calico-packet]'
type: string
logSeverityFile:
description: 'LogSeverityFile is the log severity above which logs
are sent to the log file. [Default: Info]'
type: string
logSeverityScreen:
description: 'LogSeverityScreen is the log severity above which logs
are sent to the stdout. [Default: Info]'
type: string
logSeveritySys:
description: 'LogSeveritySys is the log severity above which logs
are sent to the syslog. Set to None for no logging to syslog. [Default:
Info]'
type: string
maxIpsetSize:
type: integer
metadataAddr:
description: 'MetadataAddr is the IP address or domain name of the
server that can answer VM queries for cloud-init metadata. In OpenStack,
this corresponds to the machine running nova-api (or in Ubuntu,
nova-api-metadata). A value of none (case insensitive) means that
Felix should not set up any NAT rule for the metadata path. [Default:
127.0.0.1]'
type: string
metadataPort:
description: 'MetadataPort is the port of the metadata server. This,
combined with global.MetadataAddr (if not ''None''), is used to
set up a NAT rule, from 169.254.169.254:80 to MetadataAddr:MetadataPort.
In most cases this should not need to be changed [Default: 8775].'
type: integer
mtuIfacePattern:
description: MTUIfacePattern is a regular expression that controls
which interfaces Felix should scan in order to calculate the host's
MTU. This should not match workload interfaces (usually named cali...).
type: string
natOutgoingAddress:
description: NATOutgoingAddress specifies an address to use when performing
source NAT for traffic in a natOutgoing pool that is leaving the
network. By default the address used is an address on the interface
the traffic is leaving on (ie it uses the iptables MASQUERADE target)
type: string
natPortRange:
anyOf:
- type: integer
- type: string
description: NATPortRange specifies the range of ports that is used
for port mapping when doing outgoing NAT. When unset the default
behavior of the network stack is used.
pattern: ^.*
x-kubernetes-int-or-string: true
netlinkTimeout:
type: string
openstackRegion:
description: 'OpenstackRegion is the name of the region that a particular
Felix belongs to. In a multi-region Calico/OpenStack deployment,
this must be configured somehow for each Felix (here in the datamodel,
or in felix.cfg or the environment on each compute node), and must
match the [calico] openstack_region value configured in neutron.conf
on each node. [Default: Empty]'
type: string
policySyncPathPrefix:
description: 'PolicySyncPathPrefix is used to by Felix to communicate
policy changes to external services, like Application layer policy.
[Default: Empty]'
type: string
prometheusGoMetricsEnabled:
description: 'PrometheusGoMetricsEnabled disables Go runtime metrics
collection, which the Prometheus client does by default, when set
to false. This reduces the number of metrics reported, reducing
Prometheus load. [Default: true]'
type: boolean
prometheusMetricsEnabled:
description: 'PrometheusMetricsEnabled enables the Prometheus metrics
server in Felix if set to true. [Default: false]'
type: boolean
prometheusMetricsHost:
description: 'PrometheusMetricsHost is the host that the Prometheus
metrics server should bind to. [Default: empty]'
type: string
prometheusMetricsPort:
description: 'PrometheusMetricsPort is the TCP port that the Prometheus
metrics server should bind to. [Default: 9091]'
type: integer
prometheusProcessMetricsEnabled:
description: 'PrometheusProcessMetricsEnabled disables process metrics
collection, which the Prometheus client does by default, when set
to false. This reduces the number of metrics reported, reducing
Prometheus load. [Default: true]'
type: boolean
prometheusWireGuardMetricsEnabled:
description: 'PrometheusWireGuardMetricsEnabled disables wireguard
metrics collection, which the Prometheus client does by default,
when set to false. This reduces the number of metrics reported,
reducing Prometheus load. [Default: true]'
type: boolean
removeExternalRoutes:
description: Whether or not to remove device routes that have not
been programmed by Felix. Disabling this will allow external applications
to also add device routes. This is enabled by default which means
we will remove externally added routes.
type: boolean
reportingInterval:
description: 'ReportingInterval is the interval at which Felix reports
its status into the datastore or 0 to disable. Must be non-zero
in OpenStack deployments. [Default: 30s]'
type: string
reportingTTL:
description: 'ReportingTTL is the time-to-live setting for process-wide
status reports. [Default: 90s]'
type: string
routeRefreshInterval:
description: 'RouteRefreshInterval is the period at which Felix re-checks
the routes in the dataplane to ensure that no other process has
accidentally broken Calico''s rules. Set to 0 to disable route refresh.
[Default: 90s]'
type: string
routeSource:
description: 'RouteSource configures where Felix gets its routing
information. - WorkloadIPs: use workload endpoints to construct
routes. - CalicoIPAM: the default - use IPAM data to construct routes.'
type: string
routeSyncDisabled:
description: RouteSyncDisabled will disable all operations performed
on the route table. Set to true to run in network-policy mode only.
type: boolean
routeTableRange:
description: Deprecated in favor of RouteTableRanges. Calico programs
additional Linux route tables for various purposes. RouteTableRange
specifies the indices of the route tables that Calico should use.
properties:
max:
type: integer
min:
type: integer
required:
- max
- min
type: object
routeTableRanges:
description: Calico programs additional Linux route tables for various
purposes. RouteTableRanges specifies a set of table index ranges
that Calico should use. Deprecates`RouteTableRange`, overrides `RouteTableRange`.
items:
properties:
max:
type: integer
min:
type: integer
required:
- max
- min
type: object
type: array
serviceLoopPrevention:
description: 'When service IP advertisement is enabled, prevent routing
loops to service IPs that are not in use, by dropping or rejecting
packets that do not get DNAT''d by kube-proxy. Unless set to "Disabled",
in which case such routing loops continue to be allowed. [Default:
Drop]'
type: string
sidecarAccelerationEnabled:
description: 'SidecarAccelerationEnabled enables experimental sidecar
acceleration [Default: false]'
type: boolean
usageReportingEnabled:
description: 'UsageReportingEnabled reports anonymous Calico version
number and cluster size to projectcalico.org. Logs warnings returned
by the usage server. For example, if a significant security vulnerability
has been discovered in the version of Calico being used. [Default:
true]'
type: boolean
usageReportingInitialDelay:
description: 'UsageReportingInitialDelay controls the minimum delay
before Felix makes a report. [Default: 300s]'
type: string
usageReportingInterval:
description: 'UsageReportingInterval controls the interval at which
Felix makes reports. [Default: 86400s]'
type: string
useInternalDataplaneDriver:
description: UseInternalDataplaneDriver, if true, Felix will use its
internal dataplane programming logic. If false, it will launch
an external dataplane driver and communicate with it over protobuf.
type: boolean
vxlanEnabled:
description: 'VXLANEnabled overrides whether Felix should create the
VXLAN tunnel device for IPv4 VXLAN networking. Optional as Felix
determines this based on the existing IP pools. [Default: nil (unset)]'
type: boolean
vxlanMTU:
description: 'VXLANMTU is the MTU to set on the IPv4 VXLAN tunnel
device. See Configuring MTU [Default: 1410]'
type: integer
vxlanMTUV6:
description: 'VXLANMTUV6 is the MTU to set on the IPv6 VXLAN tunnel
device. See Configuring MTU [Default: 1390]'
type: integer
vxlanPort:
type: integer
vxlanVNI:
type: integer
wireguardEnabled:
description: 'WireguardEnabled controls whether Wireguard is enabled
for IPv4 (encapsulating IPv4 traffic over an IPv4 underlay network).
[Default: false]'
type: boolean
wireguardEnabledV6:
description: 'WireguardEnabledV6 controls whether Wireguard is enabled
for IPv6 (encapsulating IPv6 traffic over an IPv6 underlay network).
[Default: false]'
type: boolean
wireguardHostEncryptionEnabled:
description: 'WireguardHostEncryptionEnabled controls whether Wireguard
host-to-host encryption is enabled. [Default: false]'
type: boolean
wireguardInterfaceName:
description: 'WireguardInterfaceName specifies the name to use for
the IPv4 Wireguard interface. [Default: wireguard.cali]'
type: string
wireguardInterfaceNameV6:
description: 'WireguardInterfaceNameV6 specifies the name to use for
the IPv6 Wireguard interface. [Default: wg-v6.cali]'
type: string
wireguardKeepAlive:
description: 'WireguardKeepAlive controls Wireguard PersistentKeepalive
option. Set 0 to disable. [Default: 0]'
type: string
wireguardListeningPort:
description: 'WireguardListeningPort controls the listening port used
by IPv4 Wireguard. [Default: 51820]'
type: integer
wireguardListeningPortV6:
description: 'WireguardListeningPortV6 controls the listening port
used by IPv6 Wireguard. [Default: 51821]'
type: integer
wireguardMTU:
description: 'WireguardMTU controls the MTU on the IPv4 Wireguard
interface. See Configuring MTU [Default: 1440]'
type: integer
wireguardMTUV6:
description: 'WireguardMTUV6 controls the MTU on the IPv6 Wireguard
interface. See Configuring MTU [Default: 1420]'
type: integer
wireguardRoutingRulePriority:
description: 'WireguardRoutingRulePriority controls the priority value
to use for the Wireguard routing rule. [Default: 99]'
type: integer
workloadSourceSpoofing:
description: WorkloadSourceSpoofing controls whether pods can use
the allowedSourcePrefixes annotation to send traffic with a source
IP address that is not theirs. This is disabled by default. When
set to "Any", pods can request any prefix.
type: string
xdpEnabled:
description: 'XDPEnabled enables XDP acceleration for suitable untracked
incoming deny rules. [Default: true]'
type: boolean
xdpRefreshInterval:
description: 'XDPRefreshInterval is the period at which Felix re-checks
all XDP state to ensure that no other process has accidentally broken
Calico''s BPF maps or attached programs. Set to 0 to disable XDP
refresh. [Default: 90s]'
type: string
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: globalnetworkpolicies.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: GlobalNetworkPolicy
listKind: GlobalNetworkPolicyList
plural: globalnetworkpolicies
singular: globalnetworkpolicy
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
properties:
applyOnForward:
description: ApplyOnForward indicates to apply the rules in this policy
on forward traffic.
type: boolean
doNotTrack:
description: DoNotTrack indicates whether packets matched by the rules
in this policy should go through the data plane's connection tracking,
such as Linux conntrack. If True, the rules in this policy are
applied before any data plane connection tracking, and packets allowed
by this policy are marked as not to be tracked.
type: boolean
egress:
description: The ordered set of egress rules. Each rule contains
a set of packet match criteria and a corresponding action to apply.
items:
description: "A Rule encapsulates a set of match criteria and an
action. Both selector-based security Policy and security Profiles
reference rules - separated out as a list of rules for both ingress
and egress packet matching. \n Each positive match criteria has
a negated version, prefixed with \"Not\". All the match criteria
within a rule must be satisfied for a packet to match. A single
rule can contain the positive and negative version of a match
and both must be satisfied for the rule to match."
properties:
action:
type: string
destination:
description: Destination contains the match criteria that apply
to destination entity.
properties:
namespaceSelector:
description: "NamespaceSelector is an optional field that
contains a selector expression. Only traffic that originates
from (or terminates at) endpoints within the selected
namespaces will be matched. When both NamespaceSelector
and another selector are defined on the same rule, then
only workload endpoints that are matched by both selectors
will be selected by the rule. \n For NetworkPolicy, an
empty NamespaceSelector implies that the Selector is limited
to selecting only workload endpoints in the same namespace
as the NetworkPolicy. \n For NetworkPolicy, `global()`
NamespaceSelector implies that the Selector is limited
to selecting only GlobalNetworkSet or HostEndpoint. \n
For GlobalNetworkPolicy, an empty NamespaceSelector implies
the Selector applies to workload endpoints across all
namespaces."
type: string
nets:
description: Nets is an optional field that restricts the
rule to only apply to traffic that originates from (or
terminates at) IP addresses in any of the given subnets.
items:
type: string
type: array
notNets:
description: NotNets is the negated version of the Nets
field.
items:
type: string
type: array
notPorts:
description: NotPorts is the negated version of the Ports
field. Since only some protocols have ports, if any ports
are specified it requires the Protocol match in the Rule
to be set to "TCP" or "UDP".
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
notSelector:
description: NotSelector is the negated version of the Selector
field. See Selector field for subtleties with negated
selectors.
type: string
ports:
description: "Ports is an optional field that restricts
the rule to only apply to traffic that has a source (destination)
port that matches one of these ranges/values. This value
is a list of integers or strings that represent ranges
of ports. \n Since only some protocols have ports, if
any ports are specified it requires the Protocol match
in the Rule to be set to \"TCP\" or \"UDP\"."
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
selector:
description: "Selector is an optional field that contains
a selector expression (see Policy for sample syntax).
\ Only traffic that originates from (terminates at) endpoints
matching the selector will be matched. \n Note that: in
addition to the negated version of the Selector (see NotSelector
below), the selector expression syntax itself supports
negation. The two types of negation are subtly different.
One negates the set of matched endpoints, the other negates
the whole match: \n \tSelector = \"!has(my_label)\" matches
packets that are from other Calico-controlled \tendpoints
that do not have the label \"my_label\". \n \tNotSelector
= \"has(my_label)\" matches packets that are not from
Calico-controlled \tendpoints that do have the label \"my_label\".
\n The effect is that the latter will accept packets from
non-Calico sources whereas the former is limited to packets
from Calico-controlled endpoints."
type: string
serviceAccounts:
description: ServiceAccounts is an optional field that restricts
the rule to only apply to traffic that originates from
(or terminates at) a pod running as a matching service
account.
properties:
names:
description: Names is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account whose name is in the list.
items:
type: string
type: array
selector:
description: Selector is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account that matches the given label selector. If
both Names and Selector are specified then they are
AND'ed.
type: string
type: object
services:
description: "Services is an optional field that contains
options for matching Kubernetes Services. If specified,
only traffic that originates from or terminates at endpoints
within the selected service(s) will be matched, and only
to/from each endpoint's port. \n Services cannot be specified
on the same rule as Selector, NotSelector, NamespaceSelector,
Nets, NotNets or ServiceAccounts. \n Ports and NotPorts
can only be specified with Services on ingress rules."
properties:
name:
description: Name specifies the name of a Kubernetes
Service to match.
type: string
namespace:
description: Namespace specifies the namespace of the
given Service. If left empty, the rule will match
within this policy's namespace.
type: string
type: object
type: object
http:
description: HTTP contains match criteria that apply to HTTP
requests.
properties:
methods:
description: Methods is an optional field that restricts
the rule to apply only to HTTP requests that use one of
the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple
methods are OR'd together.
items:
type: string
type: array
paths:
description: 'Paths is an optional field that restricts
the rule to apply to HTTP requests that use one of the
listed HTTP Paths. Multiple paths are OR''d together.
e.g: - exact: /foo - prefix: /bar NOTE: Each entry may
ONLY specify either a `exact` or a `prefix` match. The
validator will check for it.'
items:
description: 'HTTPPath specifies an HTTP path to match.
It may be either of the form: exact: <path>: which matches
the path exactly or prefix: <path-prefix>: which matches
the path prefix'
properties:
exact:
type: string
prefix:
type: string
type: object
type: array
type: object
icmp:
description: ICMP is an optional field that restricts the rule
to apply to a specific type and code of ICMP traffic. This
should only be specified if the Protocol field is set to "ICMP"
or "ICMPv6".
properties:
code:
description: Match on a specific ICMP code. If specified,
the Type value must also be specified. This is a technical
limitation imposed by the kernel's iptables firewall,
which Calico uses to enforce the rule.
type: integer
type:
description: Match on a specific ICMP type. For example
a value of 8 refers to ICMP Echo Request (i.e. pings).
type: integer
type: object
ipVersion:
description: IPVersion is an optional field that restricts the
rule to only match a specific IP version.
type: integer
metadata:
description: Metadata contains additional information for this
rule
properties:
annotations:
additionalProperties:
type: string
description: Annotations is a set of key value pairs that
give extra information about the rule
type: object
type: object
notICMP:
description: NotICMP is the negated version of the ICMP field.
properties:
code:
description: Match on a specific ICMP code. If specified,
the Type value must also be specified. This is a technical
limitation imposed by the kernel's iptables firewall,
which Calico uses to enforce the rule.
type: integer
type:
description: Match on a specific ICMP type. For example
a value of 8 refers to ICMP Echo Request (i.e. pings).
type: integer
type: object
notProtocol:
anyOf:
- type: integer
- type: string
description: NotProtocol is the negated version of the Protocol
field.
pattern: ^.*
x-kubernetes-int-or-string: true
protocol:
anyOf:
- type: integer
- type: string
description: "Protocol is an optional field that restricts the
rule to only apply to traffic of a specific IP protocol. Required
if any of the EntityRules contain Ports (because ports only
apply to certain protocols). \n Must be one of these string
values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\",
\"UDPLite\" or an integer in the range 1-255."
pattern: ^.*
x-kubernetes-int-or-string: true
source:
description: Source contains the match criteria that apply to
source entity.
properties:
namespaceSelector:
description: "NamespaceSelector is an optional field that
contains a selector expression. Only traffic that originates
from (or terminates at) endpoints within the selected
namespaces will be matched. When both NamespaceSelector
and another selector are defined on the same rule, then
only workload endpoints that are matched by both selectors
will be selected by the rule. \n For NetworkPolicy, an
empty NamespaceSelector implies that the Selector is limited
to selecting only workload endpoints in the same namespace
as the NetworkPolicy. \n For NetworkPolicy, `global()`
NamespaceSelector implies that the Selector is limited
to selecting only GlobalNetworkSet or HostEndpoint. \n
For GlobalNetworkPolicy, an empty NamespaceSelector implies
the Selector applies to workload endpoints across all
namespaces."
type: string
nets:
description: Nets is an optional field that restricts the
rule to only apply to traffic that originates from (or
terminates at) IP addresses in any of the given subnets.
items:
type: string
type: array
notNets:
description: NotNets is the negated version of the Nets
field.
items:
type: string
type: array
notPorts:
description: NotPorts is the negated version of the Ports
field. Since only some protocols have ports, if any ports
are specified it requires the Protocol match in the Rule
to be set to "TCP" or "UDP".
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
notSelector:
description: NotSelector is the negated version of the Selector
field. See Selector field for subtleties with negated
selectors.
type: string
ports:
description: "Ports is an optional field that restricts
the rule to only apply to traffic that has a source (destination)
port that matches one of these ranges/values. This value
is a list of integers or strings that represent ranges
of ports. \n Since only some protocols have ports, if
any ports are specified it requires the Protocol match
in the Rule to be set to \"TCP\" or \"UDP\"."
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
selector:
description: "Selector is an optional field that contains
a selector expression (see Policy for sample syntax).
\ Only traffic that originates from (terminates at) endpoints
matching the selector will be matched. \n Note that: in
addition to the negated version of the Selector (see NotSelector
below), the selector expression syntax itself supports
negation. The two types of negation are subtly different.
One negates the set of matched endpoints, the other negates
the whole match: \n \tSelector = \"!has(my_label)\" matches
packets that are from other Calico-controlled \tendpoints
that do not have the label \"my_label\". \n \tNotSelector
= \"has(my_label)\" matches packets that are not from
Calico-controlled \tendpoints that do have the label \"my_label\".
\n The effect is that the latter will accept packets from
non-Calico sources whereas the former is limited to packets
from Calico-controlled endpoints."
type: string
serviceAccounts:
description: ServiceAccounts is an optional field that restricts
the rule to only apply to traffic that originates from
(or terminates at) a pod running as a matching service
account.
properties:
names:
description: Names is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account whose name is in the list.
items:
type: string
type: array
selector:
description: Selector is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account that matches the given label selector. If
both Names and Selector are specified then they are
AND'ed.
type: string
type: object
services:
description: "Services is an optional field that contains
options for matching Kubernetes Services. If specified,
only traffic that originates from or terminates at endpoints
within the selected service(s) will be matched, and only
to/from each endpoint's port. \n Services cannot be specified
on the same rule as Selector, NotSelector, NamespaceSelector,
Nets, NotNets or ServiceAccounts. \n Ports and NotPorts
can only be specified with Services on ingress rules."
properties:
name:
description: Name specifies the name of a Kubernetes
Service to match.
type: string
namespace:
description: Namespace specifies the namespace of the
given Service. If left empty, the rule will match
within this policy's namespace.
type: string
type: object
type: object
required:
- action
type: object
type: array
ingress:
description: The ordered set of ingress rules. Each rule contains
a set of packet match criteria and a corresponding action to apply.
items:
description: "A Rule encapsulates a set of match criteria and an
action. Both selector-based security Policy and security Profiles
reference rules - separated out as a list of rules for both ingress
and egress packet matching. \n Each positive match criteria has
a negated version, prefixed with \"Not\". All the match criteria
within a rule must be satisfied for a packet to match. A single
rule can contain the positive and negative version of a match
and both must be satisfied for the rule to match."
properties:
action:
type: string
destination:
description: Destination contains the match criteria that apply
to destination entity.
properties:
namespaceSelector:
description: "NamespaceSelector is an optional field that
contains a selector expression. Only traffic that originates
from (or terminates at) endpoints within the selected
namespaces will be matched. When both NamespaceSelector
and another selector are defined on the same rule, then
only workload endpoints that are matched by both selectors
will be selected by the rule. \n For NetworkPolicy, an
empty NamespaceSelector implies that the Selector is limited
to selecting only workload endpoints in the same namespace
as the NetworkPolicy. \n For NetworkPolicy, `global()`
NamespaceSelector implies that the Selector is limited
to selecting only GlobalNetworkSet or HostEndpoint. \n
For GlobalNetworkPolicy, an empty NamespaceSelector implies
the Selector applies to workload endpoints across all
namespaces."
type: string
nets:
description: Nets is an optional field that restricts the
rule to only apply to traffic that originates from (or
terminates at) IP addresses in any of the given subnets.
items:
type: string
type: array
notNets:
description: NotNets is the negated version of the Nets
field.
items:
type: string
type: array
notPorts:
description: NotPorts is the negated version of the Ports
field. Since only some protocols have ports, if any ports
are specified it requires the Protocol match in the Rule
to be set to "TCP" or "UDP".
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
notSelector:
description: NotSelector is the negated version of the Selector
field. See Selector field for subtleties with negated
selectors.
type: string
ports:
description: "Ports is an optional field that restricts
the rule to only apply to traffic that has a source (destination)
port that matches one of these ranges/values. This value
is a list of integers or strings that represent ranges
of ports. \n Since only some protocols have ports, if
any ports are specified it requires the Protocol match
in the Rule to be set to \"TCP\" or \"UDP\"."
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
selector:
description: "Selector is an optional field that contains
a selector expression (see Policy for sample syntax).
\ Only traffic that originates from (terminates at) endpoints
matching the selector will be matched. \n Note that: in
addition to the negated version of the Selector (see NotSelector
below), the selector expression syntax itself supports
negation. The two types of negation are subtly different.
One negates the set of matched endpoints, the other negates
the whole match: \n \tSelector = \"!has(my_label)\" matches
packets that are from other Calico-controlled \tendpoints
that do not have the label \"my_label\". \n \tNotSelector
= \"has(my_label)\" matches packets that are not from
Calico-controlled \tendpoints that do have the label \"my_label\".
\n The effect is that the latter will accept packets from
non-Calico sources whereas the former is limited to packets
from Calico-controlled endpoints."
type: string
serviceAccounts:
description: ServiceAccounts is an optional field that restricts
the rule to only apply to traffic that originates from
(or terminates at) a pod running as a matching service
account.
properties:
names:
description: Names is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account whose name is in the list.
items:
type: string
type: array
selector:
description: Selector is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account that matches the given label selector. If
both Names and Selector are specified then they are
AND'ed.
type: string
type: object
services:
description: "Services is an optional field that contains
options for matching Kubernetes Services. If specified,
only traffic that originates from or terminates at endpoints
within the selected service(s) will be matched, and only
to/from each endpoint's port. \n Services cannot be specified
on the same rule as Selector, NotSelector, NamespaceSelector,
Nets, NotNets or ServiceAccounts. \n Ports and NotPorts
can only be specified with Services on ingress rules."
properties:
name:
description: Name specifies the name of a Kubernetes
Service to match.
type: string
namespace:
description: Namespace specifies the namespace of the
given Service. If left empty, the rule will match
within this policy's namespace.
type: string
type: object
type: object
http:
description: HTTP contains match criteria that apply to HTTP
requests.
properties:
methods:
description: Methods is an optional field that restricts
the rule to apply only to HTTP requests that use one of
the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple
methods are OR'd together.
items:
type: string
type: array
paths:
description: 'Paths is an optional field that restricts
the rule to apply to HTTP requests that use one of the
listed HTTP Paths. Multiple paths are OR''d together.
e.g: - exact: /foo - prefix: /bar NOTE: Each entry may
ONLY specify either a `exact` or a `prefix` match. The
validator will check for it.'
items:
description: 'HTTPPath specifies an HTTP path to match.
It may be either of the form: exact: <path>: which matches
the path exactly or prefix: <path-prefix>: which matches
the path prefix'
properties:
exact:
type: string
prefix:
type: string
type: object
type: array
type: object
icmp:
description: ICMP is an optional field that restricts the rule
to apply to a specific type and code of ICMP traffic. This
should only be specified if the Protocol field is set to "ICMP"
or "ICMPv6".
properties:
code:
description: Match on a specific ICMP code. If specified,
the Type value must also be specified. This is a technical
limitation imposed by the kernel's iptables firewall,
which Calico uses to enforce the rule.
type: integer
type:
description: Match on a specific ICMP type. For example
a value of 8 refers to ICMP Echo Request (i.e. pings).
type: integer
type: object
ipVersion:
description: IPVersion is an optional field that restricts the
rule to only match a specific IP version.
type: integer
metadata:
description: Metadata contains additional information for this
rule
properties:
annotations:
additionalProperties:
type: string
description: Annotations is a set of key value pairs that
give extra information about the rule
type: object
type: object
notICMP:
description: NotICMP is the negated version of the ICMP field.
properties:
code:
description: Match on a specific ICMP code. If specified,
the Type value must also be specified. This is a technical
limitation imposed by the kernel's iptables firewall,
which Calico uses to enforce the rule.
type: integer
type:
description: Match on a specific ICMP type. For example
a value of 8 refers to ICMP Echo Request (i.e. pings).
type: integer
type: object
notProtocol:
anyOf:
- type: integer
- type: string
description: NotProtocol is the negated version of the Protocol
field.
pattern: ^.*
x-kubernetes-int-or-string: true
protocol:
anyOf:
- type: integer
- type: string
description: "Protocol is an optional field that restricts the
rule to only apply to traffic of a specific IP protocol. Required
if any of the EntityRules contain Ports (because ports only
apply to certain protocols). \n Must be one of these string
values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\",
\"UDPLite\" or an integer in the range 1-255."
pattern: ^.*
x-kubernetes-int-or-string: true
source:
description: Source contains the match criteria that apply to
source entity.
properties:
namespaceSelector:
description: "NamespaceSelector is an optional field that
contains a selector expression. Only traffic that originates
from (or terminates at) endpoints within the selected
namespaces will be matched. When both NamespaceSelector
and another selector are defined on the same rule, then
only workload endpoints that are matched by both selectors
will be selected by the rule. \n For NetworkPolicy, an
empty NamespaceSelector implies that the Selector is limited
to selecting only workload endpoints in the same namespace
as the NetworkPolicy. \n For NetworkPolicy, `global()`
NamespaceSelector implies that the Selector is limited
to selecting only GlobalNetworkSet or HostEndpoint. \n
For GlobalNetworkPolicy, an empty NamespaceSelector implies
the Selector applies to workload endpoints across all
namespaces."
type: string
nets:
description: Nets is an optional field that restricts the
rule to only apply to traffic that originates from (or
terminates at) IP addresses in any of the given subnets.
items:
type: string
type: array
notNets:
description: NotNets is the negated version of the Nets
field.
items:
type: string
type: array
notPorts:
description: NotPorts is the negated version of the Ports
field. Since only some protocols have ports, if any ports
are specified it requires the Protocol match in the Rule
to be set to "TCP" or "UDP".
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
notSelector:
description: NotSelector is the negated version of the Selector
field. See Selector field for subtleties with negated
selectors.
type: string
ports:
description: "Ports is an optional field that restricts
the rule to only apply to traffic that has a source (destination)
port that matches one of these ranges/values. This value
is a list of integers or strings that represent ranges
of ports. \n Since only some protocols have ports, if
any ports are specified it requires the Protocol match
in the Rule to be set to \"TCP\" or \"UDP\"."
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
selector:
description: "Selector is an optional field that contains
a selector expression (see Policy for sample syntax).
\ Only traffic that originates from (terminates at) endpoints
matching the selector will be matched. \n Note that: in
addition to the negated version of the Selector (see NotSelector
below), the selector expression syntax itself supports
negation. The two types of negation are subtly different.
One negates the set of matched endpoints, the other negates
the whole match: \n \tSelector = \"!has(my_label)\" matches
packets that are from other Calico-controlled \tendpoints
that do not have the label \"my_label\". \n \tNotSelector
= \"has(my_label)\" matches packets that are not from
Calico-controlled \tendpoints that do have the label \"my_label\".
\n The effect is that the latter will accept packets from
non-Calico sources whereas the former is limited to packets
from Calico-controlled endpoints."
type: string
serviceAccounts:
description: ServiceAccounts is an optional field that restricts
the rule to only apply to traffic that originates from
(or terminates at) a pod running as a matching service
account.
properties:
names:
description: Names is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account whose name is in the list.
items:
type: string
type: array
selector:
description: Selector is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account that matches the given label selector. If
both Names and Selector are specified then they are
AND'ed.
type: string
type: object
services:
description: "Services is an optional field that contains
options for matching Kubernetes Services. If specified,
only traffic that originates from or terminates at endpoints
within the selected service(s) will be matched, and only
to/from each endpoint's port. \n Services cannot be specified
on the same rule as Selector, NotSelector, NamespaceSelector,
Nets, NotNets or ServiceAccounts. \n Ports and NotPorts
can only be specified with Services on ingress rules."
properties:
name:
description: Name specifies the name of a Kubernetes
Service to match.
type: string
namespace:
description: Namespace specifies the namespace of the
given Service. If left empty, the rule will match
within this policy's namespace.
type: string
type: object
type: object
required:
- action
type: object
type: array
namespaceSelector:
description: NamespaceSelector is an optional field for an expression
used to select a pod based on namespaces.
type: string
order:
description: Order is an optional field that specifies the order in
which the policy is applied. Policies with higher "order" are applied
after those with lower order. If the order is omitted, it may be
considered to be "infinite" - i.e. the policy will be applied last. Policies
with identical order will be applied in alphanumerical order based
on the Policy "Name".
type: number
preDNAT:
description: PreDNAT indicates to apply the rules in this policy before
any DNAT.
type: boolean
selector:
description: "The selector is an expression used to pick pick out
the endpoints that the policy should be applied to. \n Selector
expressions follow this syntax: \n \tlabel == \"string_literal\"
\ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\"
\ -> not equal; also matches if label is not present \tlabel in
{ \"a\", \"b\", \"c\", ... } -> true if the value of label X is
one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\",
... } -> true if the value of label X is not one of \"a\", \"b\",
\"c\" \thas(label_name) -> True if that label is present \t! expr
-> negation of expr \texpr && expr -> Short-circuit and \texpr
|| expr -> Short-circuit or \t( expr ) -> parens for grouping \tall()
or the empty selector -> matches all endpoints. \n Label names are
allowed to contain alphanumerics, -, _ and /. String literals are
more permissive but they do not support escape characters. \n Examples
(with made-up labels): \n \ttype == \"webserver\" && deployment
== \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment !=
\"dev\" \t! has(label_name)"
type: string
serviceAccountSelector:
description: ServiceAccountSelector is an optional field for an expression
used to select a pod based on service accounts.
type: string
types:
description: "Types indicates whether this policy applies to ingress,
or to egress, or to both. When not explicitly specified (and so
the value on creation is empty or nil), Calico defaults Types according
to what Ingress and Egress rules are present in the policy. The
default is: \n - [ PolicyTypeIngress ], if there are no Egress rules
(including the case where there are also no Ingress rules) \n
- [ PolicyTypeEgress ], if there are Egress rules but no Ingress
rules \n - [ PolicyTypeIngress, PolicyTypeEgress ], if there are
both Ingress and Egress rules. \n When the policy is read back again,
Types will always be one of these values, never empty or nil."
items:
description: PolicyType enumerates the possible values of the PolicySpec
Types field.
type: string
type: array
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: globalnetworksets.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: GlobalNetworkSet
listKind: GlobalNetworkSetList
plural: globalnetworksets
singular: globalnetworkset
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
description: GlobalNetworkSet contains a set of arbitrary IP sub-networks/CIDRs
that share labels to allow rules to refer to them via selectors. The labels
of GlobalNetworkSet are not namespaced.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: GlobalNetworkSetSpec contains the specification for a NetworkSet
resource.
properties:
nets:
description: The list of IP networks that belong to this set.
items:
type: string
type: array
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: hostendpoints.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: HostEndpoint
listKind: HostEndpointList
plural: hostendpoints
singular: hostendpoint
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: HostEndpointSpec contains the specification for a HostEndpoint
resource.
properties:
expectedIPs:
description: "The expected IP addresses (IPv4 and IPv6) of the endpoint.
If \"InterfaceName\" is not present, Calico will look for an interface
matching any of the IPs in the list and apply policy to that. Note:
\tWhen using the selector match criteria in an ingress or egress
security Policy \tor Profile, Calico converts the selector into
a set of IP addresses. For host \tendpoints, the ExpectedIPs field
is used for that purpose. (If only the interface \tname is specified,
Calico does not learn the IPs of the interface for use in match
\tcriteria.)"
items:
type: string
type: array
interfaceName:
description: "Either \"*\", or the name of a specific Linux interface
to apply policy to; or empty. \"*\" indicates that this HostEndpoint
governs all traffic to, from or through the default network namespace
of the host named by the \"Node\" field; entering and leaving that
namespace via any interface, including those from/to non-host-networked
local workloads. \n If InterfaceName is not \"*\", this HostEndpoint
only governs traffic that enters or leaves the host through the
specific interface named by InterfaceName, or - when InterfaceName
is empty - through the specific interface that has one of the IPs
in ExpectedIPs. Therefore, when InterfaceName is empty, at least
one expected IP must be specified. Only external interfaces (such
as \"eth0\") are supported here; it isn't possible for a HostEndpoint
to protect traffic through a specific local workload interface.
\n Note: Only some kinds of policy are implemented for \"*\" HostEndpoints;
initially just pre-DNAT policy. Please check Calico documentation
for the latest position."
type: string
node:
description: The node name identifying the Calico node instance.
type: string
ports:
description: Ports contains the endpoint's named ports, which may
be referenced in security policy rules.
items:
properties:
name:
type: string
port:
type: integer
protocol:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
required:
- name
- port
- protocol
type: object
type: array
profiles:
description: A list of identifiers of security Profile objects that
apply to this endpoint. Each profile is applied in the order that
they appear in this list. Profile rules are applied after the selector-based
security policy.
items:
type: string
type: array
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: ipamblocks.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: IPAMBlock
listKind: IPAMBlockList
plural: ipamblocks
singular: ipamblock
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: IPAMBlockSpec contains the specification for an IPAMBlock
resource.
properties:
affinity:
description: Affinity of the block, if this block has one. If set,
it will be of the form "host:<hostname>". If not set, this block
is not affine to a host.
type: string
allocations:
description: Array of allocations in-use within this block. nil entries
mean the allocation is free. For non-nil entries at index i, the
index is the ordinal of the allocation within this block and the
value is the index of the associated attributes in the Attributes
array.
items:
type: integer
# TODO: This nullable is manually added in. We should update controller-gen
# to handle []*int properly itself.
nullable: true
type: array
attributes:
description: Attributes is an array of arbitrary metadata associated
with allocations in the block. To find attributes for a given allocation,
use the value of the allocation's entry in the Allocations array
as the index of the element in this array.
items:
properties:
handle_id:
type: string
secondary:
additionalProperties:
type: string
type: object
type: object
type: array
cidr:
description: The block's CIDR.
type: string
deleted:
description: Deleted is an internal boolean used to workaround a limitation
in the Kubernetes API whereby deletion will not return a conflict
error if the block has been updated. It should not be set manually.
type: boolean
sequenceNumber:
default: 0
description: We store a sequence number that is updated each time
the block is written. Each allocation will also store the sequence
number of the block at the time of its creation. When releasing
an IP, passing the sequence number associated with the allocation
allows us to protect against a race condition and ensure the IP
hasn't been released and re-allocated since the release request.
format: int64
type: integer
sequenceNumberForAllocation:
additionalProperties:
format: int64
type: integer
description: Map of allocated ordinal within the block to sequence
number of the block at the time of allocation. Kubernetes does not
allow numerical keys for maps, so the key is cast to a string.
type: object
strictAffinity:
description: StrictAffinity on the IPAMBlock is deprecated and no
longer used by the code. Use IPAMConfig StrictAffinity instead.
type: boolean
unallocated:
description: Unallocated is an ordered list of allocations which are
free in the block.
items:
type: integer
type: array
required:
- allocations
- attributes
- cidr
- strictAffinity
- unallocated
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: ipamconfigs.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: IPAMConfig
listKind: IPAMConfigList
plural: ipamconfigs
singular: ipamconfig
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: IPAMConfigSpec contains the specification for an IPAMConfig
resource.
properties:
autoAllocateBlocks:
type: boolean
maxBlocksPerHost:
description: MaxBlocksPerHost, if non-zero, is the max number of blocks
that can be affine to each host.
maximum: 2147483647
minimum: 0
type: integer
strictAffinity:
type: boolean
required:
- autoAllocateBlocks
- strictAffinity
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: ipamhandles.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: IPAMHandle
listKind: IPAMHandleList
plural: ipamhandles
singular: ipamhandle
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: IPAMHandleSpec contains the specification for an IPAMHandle
resource.
properties:
block:
additionalProperties:
type: integer
type: object
deleted:
type: boolean
handleID:
type: string
required:
- block
- handleID
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: ippools.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: IPPool
listKind: IPPoolList
plural: ippools
singular: ippool
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: IPPoolSpec contains the specification for an IPPool resource.
properties:
allowedUses:
description: AllowedUse controls what the IP pool will be used for. If
not specified or empty, defaults to ["Tunnel", "Workload"] for back-compatibility
items:
type: string
type: array
blockSize:
description: The block size to use for IP address assignments from
this pool. Defaults to 26 for IPv4 and 122 for IPv6.
type: integer
cidr:
description: The pool CIDR.
type: string
disableBGPExport:
description: 'Disable exporting routes from this IP Pool''s CIDR over
BGP. [Default: false]'
type: boolean
disabled:
description: When disabled is true, Calico IPAM will not assign addresses
from this pool.
type: boolean
ipip:
description: 'Deprecated: this field is only used for APIv1 backwards
compatibility. Setting this field is not allowed, this field is
for internal use only.'
properties:
enabled:
description: When enabled is true, ipip tunneling will be used
to deliver packets to destinations within this pool.
type: boolean
mode:
description: The IPIP mode. This can be one of "always" or "cross-subnet". A
mode of "always" will also use IPIP tunneling for routing to
destination IP addresses within this pool. A mode of "cross-subnet"
will only use IPIP tunneling when the destination node is on
a different subnet to the originating node. The default value
(if not specified) is "always".
type: string
type: object
ipipMode:
description: Contains configuration for IPIP tunneling for this pool.
If not specified, then this is defaulted to "Never" (i.e. IPIP tunneling
is disabled).
type: string
nat-outgoing:
description: 'Deprecated: this field is only used for APIv1 backwards
compatibility. Setting this field is not allowed, this field is
for internal use only.'
type: boolean
natOutgoing:
description: When natOutgoing is true, packets sent from Calico networked
containers in this pool to destinations outside of this pool will
be masqueraded.
type: boolean
nodeSelector:
description: Allows IPPool to allocate for a specific node by label
selector.
type: string
vxlanMode:
description: Contains configuration for VXLAN tunneling for this pool.
If not specified, then this is defaulted to "Never" (i.e. VXLAN
tunneling is disabled).
type: string
required:
- cidr
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
annotations:
controller-gen.kubebuilder.io/version: (devel)
creationTimestamp: null
name: ipreservations.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: IPReservation
listKind: IPReservationList
plural: ipreservations
singular: ipreservation
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: IPReservationSpec contains the specification for an IPReservation
resource.
properties:
reservedCIDRs:
description: ReservedCIDRs is a list of CIDRs and/or IP addresses
that Calico IPAM will exclude from new allocations.
items:
type: string
type: array
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: kubecontrollersconfigurations.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: KubeControllersConfiguration
listKind: KubeControllersConfigurationList
plural: kubecontrollersconfigurations
singular: kubecontrollersconfiguration
preserveUnknownFields: false
scope: Cluster
versions:
- name: v1
schema:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: KubeControllersConfigurationSpec contains the values of the
Kubernetes controllers configuration.
properties:
controllers:
description: Controllers enables and configures individual Kubernetes
controllers
properties:
namespace:
description: Namespace enables and configures the namespace controller.
Enabled by default, set to nil to disable.
properties:
reconcilerPeriod:
description: 'ReconcilerPeriod is the period to perform reconciliation
with the Calico datastore. [Default: 5m]'
type: string
type: object
node:
description: Node enables and configures the node controller.
Enabled by default, set to nil to disable.
properties:
hostEndpoint:
description: HostEndpoint controls syncing nodes to host endpoints.
Disabled by default, set to nil to disable.
properties:
autoCreate:
description: 'AutoCreate enables automatic creation of
host endpoints for every node. [Default: Disabled]'
type: string
type: object
leakGracePeriod:
description: 'LeakGracePeriod is the period used by the controller
to determine if an IP address has been leaked. Set to 0
to disable IP garbage collection. [Default: 15m]'
type: string
reconcilerPeriod:
description: 'ReconcilerPeriod is the period to perform reconciliation
with the Calico datastore. [Default: 5m]'
type: string
syncLabels:
description: 'SyncLabels controls whether to copy Kubernetes
node labels to Calico nodes. [Default: Enabled]'
type: string
type: object
policy:
description: Policy enables and configures the policy controller.
Enabled by default, set to nil to disable.
properties:
reconcilerPeriod:
description: 'ReconcilerPeriod is the period to perform reconciliation
with the Calico datastore. [Default: 5m]'
type: string
type: object
serviceAccount:
description: ServiceAccount enables and configures the service
account controller. Enabled by default, set to nil to disable.
properties:
reconcilerPeriod:
description: 'ReconcilerPeriod is the period to perform reconciliation
with the Calico datastore. [Default: 5m]'
type: string
type: object
workloadEndpoint:
description: WorkloadEndpoint enables and configures the workload
endpoint controller. Enabled by default, set to nil to disable.
properties:
reconcilerPeriod:
description: 'ReconcilerPeriod is the period to perform reconciliation
with the Calico datastore. [Default: 5m]'
type: string
type: object
type: object
debugProfilePort:
description: DebugProfilePort configures the port to serve memory
and cpu profiles on. If not specified, profiling is disabled.
format: int32
type: integer
etcdV3CompactionPeriod:
description: 'EtcdV3CompactionPeriod is the period between etcdv3
compaction requests. Set to 0 to disable. [Default: 10m]'
type: string
healthChecks:
description: 'HealthChecks enables or disables support for health
checks [Default: Enabled]'
type: string
logSeverityScreen:
description: 'LogSeverityScreen is the log severity above which logs
are sent to the stdout. [Default: Info]'
type: string
prometheusMetricsPort:
description: 'PrometheusMetricsPort is the TCP port that the Prometheus
metrics server should bind to. Set to 0 to disable. [Default: 9094]'
type: integer
required:
- controllers
type: object
status:
description: KubeControllersConfigurationStatus represents the status
of the configuration. It's useful for admins to be able to see the actual
config that was applied, which can be modified by environment variables
on the kube-controllers process.
properties:
environmentVars:
additionalProperties:
type: string
description: EnvironmentVars contains the environment variables on
the kube-controllers that influenced the RunningConfig.
type: object
runningConfig:
description: RunningConfig contains the effective config that is running
in the kube-controllers pod, after merging the API resource with
any environment variables.
properties:
controllers:
description: Controllers enables and configures individual Kubernetes
controllers
properties:
namespace:
description: Namespace enables and configures the namespace
controller. Enabled by default, set to nil to disable.
properties:
reconcilerPeriod:
description: 'ReconcilerPeriod is the period to perform
reconciliation with the Calico datastore. [Default:
5m]'
type: string
type: object
node:
description: Node enables and configures the node controller.
Enabled by default, set to nil to disable.
properties:
hostEndpoint:
description: HostEndpoint controls syncing nodes to host
endpoints. Disabled by default, set to nil to disable.
properties:
autoCreate:
description: 'AutoCreate enables automatic creation
of host endpoints for every node. [Default: Disabled]'
type: string
type: object
leakGracePeriod:
description: 'LeakGracePeriod is the period used by the
controller to determine if an IP address has been leaked.
Set to 0 to disable IP garbage collection. [Default:
15m]'
type: string
reconcilerPeriod:
description: 'ReconcilerPeriod is the period to perform
reconciliation with the Calico datastore. [Default:
5m]'
type: string
syncLabels:
description: 'SyncLabels controls whether to copy Kubernetes
node labels to Calico nodes. [Default: Enabled]'
type: string
type: object
policy:
description: Policy enables and configures the policy controller.
Enabled by default, set to nil to disable.
properties:
reconcilerPeriod:
description: 'ReconcilerPeriod is the period to perform
reconciliation with the Calico datastore. [Default:
5m]'
type: string
type: object
serviceAccount:
description: ServiceAccount enables and configures the service
account controller. Enabled by default, set to nil to disable.
properties:
reconcilerPeriod:
description: 'ReconcilerPeriod is the period to perform
reconciliation with the Calico datastore. [Default:
5m]'
type: string
type: object
workloadEndpoint:
description: WorkloadEndpoint enables and configures the workload
endpoint controller. Enabled by default, set to nil to disable.
properties:
reconcilerPeriod:
description: 'ReconcilerPeriod is the period to perform
reconciliation with the Calico datastore. [Default:
5m]'
type: string
type: object
type: object
debugProfilePort:
description: DebugProfilePort configures the port to serve memory
and cpu profiles on. If not specified, profiling is disabled.
format: int32
type: integer
etcdV3CompactionPeriod:
description: 'EtcdV3CompactionPeriod is the period between etcdv3
compaction requests. Set to 0 to disable. [Default: 10m]'
type: string
healthChecks:
description: 'HealthChecks enables or disables support for health
checks [Default: Enabled]'
type: string
logSeverityScreen:
description: 'LogSeverityScreen is the log severity above which
logs are sent to the stdout. [Default: Info]'
type: string
prometheusMetricsPort:
description: 'PrometheusMetricsPort is the TCP port that the Prometheus
metrics server should bind to. Set to 0 to disable. [Default:
9094]'
type: integer
required:
- controllers
type: object
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: networkpolicies.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: NetworkPolicy
listKind: NetworkPolicyList
plural: networkpolicies
singular: networkpolicy
preserveUnknownFields: false
scope: Namespaced
versions:
- name: v1
schema:
openAPIV3Schema:
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
properties:
egress:
description: The ordered set of egress rules. Each rule contains
a set of packet match criteria and a corresponding action to apply.
items:
description: "A Rule encapsulates a set of match criteria and an
action. Both selector-based security Policy and security Profiles
reference rules - separated out as a list of rules for both ingress
and egress packet matching. \n Each positive match criteria has
a negated version, prefixed with \"Not\". All the match criteria
within a rule must be satisfied for a packet to match. A single
rule can contain the positive and negative version of a match
and both must be satisfied for the rule to match."
properties:
action:
type: string
destination:
description: Destination contains the match criteria that apply
to destination entity.
properties:
namespaceSelector:
description: "NamespaceSelector is an optional field that
contains a selector expression. Only traffic that originates
from (or terminates at) endpoints within the selected
namespaces will be matched. When both NamespaceSelector
and another selector are defined on the same rule, then
only workload endpoints that are matched by both selectors
will be selected by the rule. \n For NetworkPolicy, an
empty NamespaceSelector implies that the Selector is limited
to selecting only workload endpoints in the same namespace
as the NetworkPolicy. \n For NetworkPolicy, `global()`
NamespaceSelector implies that the Selector is limited
to selecting only GlobalNetworkSet or HostEndpoint. \n
For GlobalNetworkPolicy, an empty NamespaceSelector implies
the Selector applies to workload endpoints across all
namespaces."
type: string
nets:
description: Nets is an optional field that restricts the
rule to only apply to traffic that originates from (or
terminates at) IP addresses in any of the given subnets.
items:
type: string
type: array
notNets:
description: NotNets is the negated version of the Nets
field.
items:
type: string
type: array
notPorts:
description: NotPorts is the negated version of the Ports
field. Since only some protocols have ports, if any ports
are specified it requires the Protocol match in the Rule
to be set to "TCP" or "UDP".
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
notSelector:
description: NotSelector is the negated version of the Selector
field. See Selector field for subtleties with negated
selectors.
type: string
ports:
description: "Ports is an optional field that restricts
the rule to only apply to traffic that has a source (destination)
port that matches one of these ranges/values. This value
is a list of integers or strings that represent ranges
of ports. \n Since only some protocols have ports, if
any ports are specified it requires the Protocol match
in the Rule to be set to \"TCP\" or \"UDP\"."
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
selector:
description: "Selector is an optional field that contains
a selector expression (see Policy for sample syntax).
\ Only traffic that originates from (terminates at) endpoints
matching the selector will be matched. \n Note that: in
addition to the negated version of the Selector (see NotSelector
below), the selector expression syntax itself supports
negation. The two types of negation are subtly different.
One negates the set of matched endpoints, the other negates
the whole match: \n \tSelector = \"!has(my_label)\" matches
packets that are from other Calico-controlled \tendpoints
that do not have the label \"my_label\". \n \tNotSelector
= \"has(my_label)\" matches packets that are not from
Calico-controlled \tendpoints that do have the label \"my_label\".
\n The effect is that the latter will accept packets from
non-Calico sources whereas the former is limited to packets
from Calico-controlled endpoints."
type: string
serviceAccounts:
description: ServiceAccounts is an optional field that restricts
the rule to only apply to traffic that originates from
(or terminates at) a pod running as a matching service
account.
properties:
names:
description: Names is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account whose name is in the list.
items:
type: string
type: array
selector:
description: Selector is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account that matches the given label selector. If
both Names and Selector are specified then they are
AND'ed.
type: string
type: object
services:
description: "Services is an optional field that contains
options for matching Kubernetes Services. If specified,
only traffic that originates from or terminates at endpoints
within the selected service(s) will be matched, and only
to/from each endpoint's port. \n Services cannot be specified
on the same rule as Selector, NotSelector, NamespaceSelector,
Nets, NotNets or ServiceAccounts. \n Ports and NotPorts
can only be specified with Services on ingress rules."
properties:
name:
description: Name specifies the name of a Kubernetes
Service to match.
type: string
namespace:
description: Namespace specifies the namespace of the
given Service. If left empty, the rule will match
within this policy's namespace.
type: string
type: object
type: object
http:
description: HTTP contains match criteria that apply to HTTP
requests.
properties:
methods:
description: Methods is an optional field that restricts
the rule to apply only to HTTP requests that use one of
the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple
methods are OR'd together.
items:
type: string
type: array
paths:
description: 'Paths is an optional field that restricts
the rule to apply to HTTP requests that use one of the
listed HTTP Paths. Multiple paths are OR''d together.
e.g: - exact: /foo - prefix: /bar NOTE: Each entry may
ONLY specify either a `exact` or a `prefix` match. The
validator will check for it.'
items:
description: 'HTTPPath specifies an HTTP path to match.
It may be either of the form: exact: <path>: which matches
the path exactly or prefix: <path-prefix>: which matches
the path prefix'
properties:
exact:
type: string
prefix:
type: string
type: object
type: array
type: object
icmp:
description: ICMP is an optional field that restricts the rule
to apply to a specific type and code of ICMP traffic. This
should only be specified if the Protocol field is set to "ICMP"
or "ICMPv6".
properties:
code:
description: Match on a specific ICMP code. If specified,
the Type value must also be specified. This is a technical
limitation imposed by the kernel's iptables firewall,
which Calico uses to enforce the rule.
type: integer
type:
description: Match on a specific ICMP type. For example
a value of 8 refers to ICMP Echo Request (i.e. pings).
type: integer
type: object
ipVersion:
description: IPVersion is an optional field that restricts the
rule to only match a specific IP version.
type: integer
metadata:
description: Metadata contains additional information for this
rule
properties:
annotations:
additionalProperties:
type: string
description: Annotations is a set of key value pairs that
give extra information about the rule
type: object
type: object
notICMP:
description: NotICMP is the negated version of the ICMP field.
properties:
code:
description: Match on a specific ICMP code. If specified,
the Type value must also be specified. This is a technical
limitation imposed by the kernel's iptables firewall,
which Calico uses to enforce the rule.
type: integer
type:
description: Match on a specific ICMP type. For example
a value of 8 refers to ICMP Echo Request (i.e. pings).
type: integer
type: object
notProtocol:
anyOf:
- type: integer
- type: string
description: NotProtocol is the negated version of the Protocol
field.
pattern: ^.*
x-kubernetes-int-or-string: true
protocol:
anyOf:
- type: integer
- type: string
description: "Protocol is an optional field that restricts the
rule to only apply to traffic of a specific IP protocol. Required
if any of the EntityRules contain Ports (because ports only
apply to certain protocols). \n Must be one of these string
values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\",
\"UDPLite\" or an integer in the range 1-255."
pattern: ^.*
x-kubernetes-int-or-string: true
source:
description: Source contains the match criteria that apply to
source entity.
properties:
namespaceSelector:
description: "NamespaceSelector is an optional field that
contains a selector expression. Only traffic that originates
from (or terminates at) endpoints within the selected
namespaces will be matched. When both NamespaceSelector
and another selector are defined on the same rule, then
only workload endpoints that are matched by both selectors
will be selected by the rule. \n For NetworkPolicy, an
empty NamespaceSelector implies that the Selector is limited
to selecting only workload endpoints in the same namespace
as the NetworkPolicy. \n For NetworkPolicy, `global()`
NamespaceSelector implies that the Selector is limited
to selecting only GlobalNetworkSet or HostEndpoint. \n
For GlobalNetworkPolicy, an empty NamespaceSelector implies
the Selector applies to workload endpoints across all
namespaces."
type: string
nets:
description: Nets is an optional field that restricts the
rule to only apply to traffic that originates from (or
terminates at) IP addresses in any of the given subnets.
items:
type: string
type: array
notNets:
description: NotNets is the negated version of the Nets
field.
items:
type: string
type: array
notPorts:
description: NotPorts is the negated version of the Ports
field. Since only some protocols have ports, if any ports
are specified it requires the Protocol match in the Rule
to be set to "TCP" or "UDP".
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
notSelector:
description: NotSelector is the negated version of the Selector
field. See Selector field for subtleties with negated
selectors.
type: string
ports:
description: "Ports is an optional field that restricts
the rule to only apply to traffic that has a source (destination)
port that matches one of these ranges/values. This value
is a list of integers or strings that represent ranges
of ports. \n Since only some protocols have ports, if
any ports are specified it requires the Protocol match
in the Rule to be set to \"TCP\" or \"UDP\"."
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
selector:
description: "Selector is an optional field that contains
a selector expression (see Policy for sample syntax).
\ Only traffic that originates from (terminates at) endpoints
matching the selector will be matched. \n Note that: in
addition to the negated version of the Selector (see NotSelector
below), the selector expression syntax itself supports
negation. The two types of negation are subtly different.
One negates the set of matched endpoints, the other negates
the whole match: \n \tSelector = \"!has(my_label)\" matches
packets that are from other Calico-controlled \tendpoints
that do not have the label \"my_label\". \n \tNotSelector
= \"has(my_label)\" matches packets that are not from
Calico-controlled \tendpoints that do have the label \"my_label\".
\n The effect is that the latter will accept packets from
non-Calico sources whereas the former is limited to packets
from Calico-controlled endpoints."
type: string
serviceAccounts:
description: ServiceAccounts is an optional field that restricts
the rule to only apply to traffic that originates from
(or terminates at) a pod running as a matching service
account.
properties:
names:
description: Names is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account whose name is in the list.
items:
type: string
type: array
selector:
description: Selector is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account that matches the given label selector. If
both Names and Selector are specified then they are
AND'ed.
type: string
type: object
services:
description: "Services is an optional field that contains
options for matching Kubernetes Services. If specified,
only traffic that originates from or terminates at endpoints
within the selected service(s) will be matched, and only
to/from each endpoint's port. \n Services cannot be specified
on the same rule as Selector, NotSelector, NamespaceSelector,
Nets, NotNets or ServiceAccounts. \n Ports and NotPorts
can only be specified with Services on ingress rules."
properties:
name:
description: Name specifies the name of a Kubernetes
Service to match.
type: string
namespace:
description: Namespace specifies the namespace of the
given Service. If left empty, the rule will match
within this policy's namespace.
type: string
type: object
type: object
required:
- action
type: object
type: array
ingress:
description: The ordered set of ingress rules. Each rule contains
a set of packet match criteria and a corresponding action to apply.
items:
description: "A Rule encapsulates a set of match criteria and an
action. Both selector-based security Policy and security Profiles
reference rules - separated out as a list of rules for both ingress
and egress packet matching. \n Each positive match criteria has
a negated version, prefixed with \"Not\". All the match criteria
within a rule must be satisfied for a packet to match. A single
rule can contain the positive and negative version of a match
and both must be satisfied for the rule to match."
properties:
action:
type: string
destination:
description: Destination contains the match criteria that apply
to destination entity.
properties:
namespaceSelector:
description: "NamespaceSelector is an optional field that
contains a selector expression. Only traffic that originates
from (or terminates at) endpoints within the selected
namespaces will be matched. When both NamespaceSelector
and another selector are defined on the same rule, then
only workload endpoints that are matched by both selectors
will be selected by the rule. \n For NetworkPolicy, an
empty NamespaceSelector implies that the Selector is limited
to selecting only workload endpoints in the same namespace
as the NetworkPolicy. \n For NetworkPolicy, `global()`
NamespaceSelector implies that the Selector is limited
to selecting only GlobalNetworkSet or HostEndpoint. \n
For GlobalNetworkPolicy, an empty NamespaceSelector implies
the Selector applies to workload endpoints across all
namespaces."
type: string
nets:
description: Nets is an optional field that restricts the
rule to only apply to traffic that originates from (or
terminates at) IP addresses in any of the given subnets.
items:
type: string
type: array
notNets:
description: NotNets is the negated version of the Nets
field.
items:
type: string
type: array
notPorts:
description: NotPorts is the negated version of the Ports
field. Since only some protocols have ports, if any ports
are specified it requires the Protocol match in the Rule
to be set to "TCP" or "UDP".
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
notSelector:
description: NotSelector is the negated version of the Selector
field. See Selector field for subtleties with negated
selectors.
type: string
ports:
description: "Ports is an optional field that restricts
the rule to only apply to traffic that has a source (destination)
port that matches one of these ranges/values. This value
is a list of integers or strings that represent ranges
of ports. \n Since only some protocols have ports, if
any ports are specified it requires the Protocol match
in the Rule to be set to \"TCP\" or \"UDP\"."
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
selector:
description: "Selector is an optional field that contains
a selector expression (see Policy for sample syntax).
\ Only traffic that originates from (terminates at) endpoints
matching the selector will be matched. \n Note that: in
addition to the negated version of the Selector (see NotSelector
below), the selector expression syntax itself supports
negation. The two types of negation are subtly different.
One negates the set of matched endpoints, the other negates
the whole match: \n \tSelector = \"!has(my_label)\" matches
packets that are from other Calico-controlled \tendpoints
that do not have the label \"my_label\". \n \tNotSelector
= \"has(my_label)\" matches packets that are not from
Calico-controlled \tendpoints that do have the label \"my_label\".
\n The effect is that the latter will accept packets from
non-Calico sources whereas the former is limited to packets
from Calico-controlled endpoints."
type: string
serviceAccounts:
description: ServiceAccounts is an optional field that restricts
the rule to only apply to traffic that originates from
(or terminates at) a pod running as a matching service
account.
properties:
names:
description: Names is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account whose name is in the list.
items:
type: string
type: array
selector:
description: Selector is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account that matches the given label selector. If
both Names and Selector are specified then they are
AND'ed.
type: string
type: object
services:
description: "Services is an optional field that contains
options for matching Kubernetes Services. If specified,
only traffic that originates from or terminates at endpoints
within the selected service(s) will be matched, and only
to/from each endpoint's port. \n Services cannot be specified
on the same rule as Selector, NotSelector, NamespaceSelector,
Nets, NotNets or ServiceAccounts. \n Ports and NotPorts
can only be specified with Services on ingress rules."
properties:
name:
description: Name specifies the name of a Kubernetes
Service to match.
type: string
namespace:
description: Namespace specifies the namespace of the
given Service. If left empty, the rule will match
within this policy's namespace.
type: string
type: object
type: object
http:
description: HTTP contains match criteria that apply to HTTP
requests.
properties:
methods:
description: Methods is an optional field that restricts
the rule to apply only to HTTP requests that use one of
the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple
methods are OR'd together.
items:
type: string
type: array
paths:
description: 'Paths is an optional field that restricts
the rule to apply to HTTP requests that use one of the
listed HTTP Paths. Multiple paths are OR''d together.
e.g: - exact: /foo - prefix: /bar NOTE: Each entry may
ONLY specify either a `exact` or a `prefix` match. The
validator will check for it.'
items:
description: 'HTTPPath specifies an HTTP path to match.
It may be either of the form: exact: <path>: which matches
the path exactly or prefix: <path-prefix>: which matches
the path prefix'
properties:
exact:
type: string
prefix:
type: string
type: object
type: array
type: object
icmp:
description: ICMP is an optional field that restricts the rule
to apply to a specific type and code of ICMP traffic. This
should only be specified if the Protocol field is set to "ICMP"
or "ICMPv6".
properties:
code:
description: Match on a specific ICMP code. If specified,
the Type value must also be specified. This is a technical
limitation imposed by the kernel's iptables firewall,
which Calico uses to enforce the rule.
type: integer
type:
description: Match on a specific ICMP type. For example
a value of 8 refers to ICMP Echo Request (i.e. pings).
type: integer
type: object
ipVersion:
description: IPVersion is an optional field that restricts the
rule to only match a specific IP version.
type: integer
metadata:
description: Metadata contains additional information for this
rule
properties:
annotations:
additionalProperties:
type: string
description: Annotations is a set of key value pairs that
give extra information about the rule
type: object
type: object
notICMP:
description: NotICMP is the negated version of the ICMP field.
properties:
code:
description: Match on a specific ICMP code. If specified,
the Type value must also be specified. This is a technical
limitation imposed by the kernel's iptables firewall,
which Calico uses to enforce the rule.
type: integer
type:
description: Match on a specific ICMP type. For example
a value of 8 refers to ICMP Echo Request (i.e. pings).
type: integer
type: object
notProtocol:
anyOf:
- type: integer
- type: string
description: NotProtocol is the negated version of the Protocol
field.
pattern: ^.*
x-kubernetes-int-or-string: true
protocol:
anyOf:
- type: integer
- type: string
description: "Protocol is an optional field that restricts the
rule to only apply to traffic of a specific IP protocol. Required
if any of the EntityRules contain Ports (because ports only
apply to certain protocols). \n Must be one of these string
values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\",
\"UDPLite\" or an integer in the range 1-255."
pattern: ^.*
x-kubernetes-int-or-string: true
source:
description: Source contains the match criteria that apply to
source entity.
properties:
namespaceSelector:
description: "NamespaceSelector is an optional field that
contains a selector expression. Only traffic that originates
from (or terminates at) endpoints within the selected
namespaces will be matched. When both NamespaceSelector
and another selector are defined on the same rule, then
only workload endpoints that are matched by both selectors
will be selected by the rule. \n For NetworkPolicy, an
empty NamespaceSelector implies that the Selector is limited
to selecting only workload endpoints in the same namespace
as the NetworkPolicy. \n For NetworkPolicy, `global()`
NamespaceSelector implies that the Selector is limited
to selecting only GlobalNetworkSet or HostEndpoint. \n
For GlobalNetworkPolicy, an empty NamespaceSelector implies
the Selector applies to workload endpoints across all
namespaces."
type: string
nets:
description: Nets is an optional field that restricts the
rule to only apply to traffic that originates from (or
terminates at) IP addresses in any of the given subnets.
items:
type: string
type: array
notNets:
description: NotNets is the negated version of the Nets
field.
items:
type: string
type: array
notPorts:
description: NotPorts is the negated version of the Ports
field. Since only some protocols have ports, if any ports
are specified it requires the Protocol match in the Rule
to be set to "TCP" or "UDP".
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
notSelector:
description: NotSelector is the negated version of the Selector
field. See Selector field for subtleties with negated
selectors.
type: string
ports:
description: "Ports is an optional field that restricts
the rule to only apply to traffic that has a source (destination)
port that matches one of these ranges/values. This value
is a list of integers or strings that represent ranges
of ports. \n Since only some protocols have ports, if
any ports are specified it requires the Protocol match
in the Rule to be set to \"TCP\" or \"UDP\"."
items:
anyOf:
- type: integer
- type: string
pattern: ^.*
x-kubernetes-int-or-string: true
type: array
selector:
description: "Selector is an optional field that contains
a selector expression (see Policy for sample syntax).
\ Only traffic that originates from (terminates at) endpoints
matching the selector will be matched. \n Note that: in
addition to the negated version of the Selector (see NotSelector
below), the selector expression syntax itself supports
negation. The two types of negation are subtly different.
One negates the set of matched endpoints, the other negates
the whole match: \n \tSelector = \"!has(my_label)\" matches
packets that are from other Calico-controlled \tendpoints
that do not have the label \"my_label\". \n \tNotSelector
= \"has(my_label)\" matches packets that are not from
Calico-controlled \tendpoints that do have the label \"my_label\".
\n The effect is that the latter will accept packets from
non-Calico sources whereas the former is limited to packets
from Calico-controlled endpoints."
type: string
serviceAccounts:
description: ServiceAccounts is an optional field that restricts
the rule to only apply to traffic that originates from
(or terminates at) a pod running as a matching service
account.
properties:
names:
description: Names is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account whose name is in the list.
items:
type: string
type: array
selector:
description: Selector is an optional field that restricts
the rule to only apply to traffic that originates
from (or terminates at) a pod running as a service
account that matches the given label selector. If
both Names and Selector are specified then they are
AND'ed.
type: string
type: object
services:
description: "Services is an optional field that contains
options for matching Kubernetes Services. If specified,
only traffic that originates from or terminates at endpoints
within the selected service(s) will be matched, and only
to/from each endpoint's port. \n Services cannot be specified
on the same rule as Selector, NotSelector, NamespaceSelector,
Nets, NotNets or ServiceAccounts. \n Ports and NotPorts
can only be specified with Services on ingress rules."
properties:
name:
description: Name specifies the name of a Kubernetes
Service to match.
type: string
namespace:
description: Namespace specifies the namespace of the
given Service. If left empty, the rule will match
within this policy's namespace.
type: string
type: object
type: object
required:
- action
type: object
type: array
order:
description: Order is an optional field that specifies the order in
which the policy is applied. Policies with higher "order" are applied
after those with lower order. If the order is omitted, it may be
considered to be "infinite" - i.e. the policy will be applied last. Policies
with identical order will be applied in alphanumerical order based
on the Policy "Name".
type: number
selector:
description: "The selector is an expression used to pick pick out
the endpoints that the policy should be applied to. \n Selector
expressions follow this syntax: \n \tlabel == \"string_literal\"
\ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\"
\ -> not equal; also matches if label is not present \tlabel in
{ \"a\", \"b\", \"c\", ... } -> true if the value of label X is
one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\",
... } -> true if the value of label X is not one of \"a\", \"b\",
\"c\" \thas(label_name) -> True if that label is present \t! expr
-> negation of expr \texpr && expr -> Short-circuit and \texpr
|| expr -> Short-circuit or \t( expr ) -> parens for grouping \tall()
or the empty selector -> matches all endpoints. \n Label names are
allowed to contain alphanumerics, -, _ and /. String literals are
more permissive but they do not support escape characters. \n Examples
(with made-up labels): \n \ttype == \"webserver\" && deployment
== \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment !=
\"dev\" \t! has(label_name)"
type: string
serviceAccountSelector:
description: ServiceAccountSelector is an optional field for an expression
used to select a pod based on service accounts.
type: string
types:
description: "Types indicates whether this policy applies to ingress,
or to egress, or to both. When not explicitly specified (and so
the value on creation is empty or nil), Calico defaults Types according
to what Ingress and Egress are present in the policy. The default
is: \n - [ PolicyTypeIngress ], if there are no Egress rules (including
the case where there are also no Ingress rules) \n - [ PolicyTypeEgress
], if there are Egress rules but no Ingress rules \n - [ PolicyTypeIngress,
PolicyTypeEgress ], if there are both Ingress and Egress rules.
\n When the policy is read back again, Types will always be one
of these values, never empty or nil."
items:
description: PolicyType enumerates the possible values of the PolicySpec
Types field.
type: string
type: array
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/kdd-crds.yaml
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
name: networksets.crd.projectcalico.org
spec:
group: crd.projectcalico.org
names:
kind: NetworkSet
listKind: NetworkSetList
plural: networksets
singular: networkset
preserveUnknownFields: false
scope: Namespaced
versions:
- name: v1
schema:
openAPIV3Schema:
description: NetworkSet is the Namespaced-equivalent of the GlobalNetworkSet.
properties:
apiVersion:
description: 'APIVersion defines the versioned schema of this representation
of an object. Servers should convert recognized schemas to the latest
internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
type: string
kind:
description: 'Kind is a string value representing the REST resource this
object represents. Servers may infer this from the endpoint the client
submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
type: string
metadata:
type: object
spec:
description: NetworkSetSpec contains the specification for a NetworkSet
resource.
properties:
nets:
description: The list of IP networks that belong to this set.
items:
type: string
type: array
type: object
type: object
served: true
storage: true
status:
acceptedNames:
kind: ""
plural: ""
conditions: []
storedVersions: []
---
# Source: calico/templates/calico-kube-controllers-rbac.yaml
# Include a clusterrole for the kube-controllers component,
# and bind it to the calico-kube-controllers serviceaccount.
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: calico-kube-controllers
rules:
# Nodes are watched to monitor for deletions.
- apiGroups: [""]
resources:
- nodes
verbs:
- watch
- list
- get
# Pods are watched to check for existence as part of IPAM controller.
- apiGroups: [""]
resources:
- pods
verbs:
- get
- list
- watch
# IPAM resources are manipulated in response to node and block updates, as well as periodic triggers.
- apiGroups: ["crd.projectcalico.org"]
resources:
- ipreservations
verbs:
- list
- apiGroups: ["crd.projectcalico.org"]
resources:
- blockaffinities
- ipamblocks
- ipamhandles
verbs:
- get
- list
- create
- update
- delete
- watch
# Pools are watched to maintain a mapping of blocks to IP pools.
- apiGroups: ["crd.projectcalico.org"]
resources:
- ippools
verbs:
- list
- watch
# kube-controllers manages hostendpoints.
- apiGroups: ["crd.projectcalico.org"]
resources:
- hostendpoints
verbs:
- get
- list
- create
- update
- delete
# Needs access to update clusterinformations.
- apiGroups: ["crd.projectcalico.org"]
resources:
- clusterinformations
verbs:
- get
- list
- create
- update
- watch
# KubeControllersConfiguration is where it gets its config
- apiGroups: ["crd.projectcalico.org"]
resources:
- kubecontrollersconfigurations
verbs:
# read its own config
- get
# create a default if none exists
- create
# update status
- update
# watch for changes
- watch
---
# Source: calico/templates/calico-node-rbac.yaml
# Include a clusterrole for the calico-node DaemonSet,
# and bind it to the calico-node serviceaccount.
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: calico-node
rules:
# Used for creating service account tokens to be used by the CNI plugin
- apiGroups: [""]
resources:
- serviceaccounts/token
resourceNames:
- calico-cni-plugin
verbs:
- create
# The CNI plugin needs to get pods, nodes, and namespaces.
- apiGroups: [""]
resources:
- pods
- nodes
- namespaces
verbs:
- get
# EndpointSlices are used for Service-based network policy rule
# enforcement.
- apiGroups: ["discovery.k8s.io"]
resources:
- endpointslices
verbs:
- watch
- list
- apiGroups: [""]
resources:
- endpoints
- services
verbs:
# Used to discover service IPs for advertisement.
- watch
- list
# Used to discover Typhas.
- get
# Pod CIDR auto-detection on kubeadm needs access to config maps.
- apiGroups: [""]
resources:
- configmaps
verbs:
- get
- apiGroups: [""]
resources:
- nodes/status
verbs:
# Needed for clearing NodeNetworkUnavailable flag.
- patch
# Calico stores some configuration information in node annotations.
- update
# Watch for changes to Kubernetes NetworkPolicies.
- apiGroups: ["networking.k8s.io"]
resources:
- networkpolicies
verbs:
- watch
- list
# Used by Calico for policy information.
- apiGroups: [""]
resources:
- pods
- namespaces
- serviceaccounts
verbs:
- list
- watch
# The CNI plugin patches pods/status.
- apiGroups: [""]
resources:
- pods/status
verbs:
- patch
# Calico monitors various CRDs for config.
- apiGroups: ["crd.projectcalico.org"]
resources:
- globalfelixconfigs
- felixconfigurations
- bgppeers
- bgpfilters
- globalbgpconfigs
- bgpconfigurations
- ippools
- ipreservations
- ipamblocks
- globalnetworkpolicies
- globalnetworksets
- networkpolicies
- networksets
- clusterinformations
- hostendpoints
- blockaffinities
- caliconodestatuses
verbs:
- get
- list
- watch
# Calico must create and update some CRDs on startup.
- apiGroups: ["crd.projectcalico.org"]
resources:
- ippools
- felixconfigurations
- clusterinformations
verbs:
- create
- update
# Calico must update some CRDs.
- apiGroups: [ "crd.projectcalico.org" ]
resources:
- caliconodestatuses
verbs:
- update
# Calico stores some configuration information on the node.
- apiGroups: [""]
resources:
- nodes
verbs:
- get
- list
- watch
# These permissions are only required for upgrade from v2.6, and can
# be removed after upgrade or on fresh installations.
- apiGroups: ["crd.projectcalico.org"]
resources:
- bgpconfigurations
- bgppeers
verbs:
- create
- update
# These permissions are required for Calico CNI to perform IPAM allocations.
- apiGroups: ["crd.projectcalico.org"]
resources:
- blockaffinities
- ipamblocks
- ipamhandles
verbs:
- get
- list
- create
- update
- delete
# The CNI plugin and calico/node need to be able to create a default
# IPAMConfiguration
- apiGroups: ["crd.projectcalico.org"]
resources:
- ipamconfigs
verbs:
- get
- create
# Block affinities must also be watchable by confd for route aggregation.
- apiGroups: ["crd.projectcalico.org"]
resources:
- blockaffinities
verbs:
- watch
# The Calico IPAM migration needs to get daemonsets. These permissions can be
# removed if not upgrading from an installation using host-local IPAM.
- apiGroups: ["apps"]
resources:
- daemonsets
verbs:
- get
---
# Source: calico/templates/calico-node-rbac.yaml
# CNI cluster role
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: calico-cni-plugin
rules:
- apiGroups: [""]
resources:
- pods
- nodes
- namespaces
verbs:
- get
- apiGroups: [""]
resources:
- pods/status
verbs:
- patch
- apiGroups: ["crd.projectcalico.org"]
resources:
- blockaffinities
- ipamblocks
- ipamhandles
- clusterinformations
- ippools
- ipreservations
- ipamconfigs
verbs:
- get
- list
- create
- update
- delete
---
# Source: calico/templates/calico-kube-controllers-rbac.yaml
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: calico-kube-controllers
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: calico-kube-controllers
subjects:
- kind: ServiceAccount
name: calico-kube-controllers
namespace: kube-system
---
# Source: calico/templates/calico-node-rbac.yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
name: calico-node
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: calico-node
subjects:
- kind: ServiceAccount
name: calico-node
namespace: kube-system
---
# Source: calico/templates/calico-node-rbac.yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
name: calico-cni-plugin
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: calico-cni-plugin
subjects:
- kind: ServiceAccount
name: calico-cni-plugin
namespace: kube-system
---
# Source: calico/templates/calico-node.yaml
# This manifest installs the calico-node container, as well
# as the CNI plugins and network config on
# each master and worker node in a Kubernetes cluster.
kind: DaemonSet
apiVersion: apps/v1
metadata:
name: calico-node
namespace: kube-system
labels:
k8s-app: calico-node
spec:
selector:
matchLabels:
k8s-app: calico-node
updateStrategy:
type: RollingUpdate
rollingUpdate:
maxUnavailable: 1
template:
metadata:
labels:
k8s-app: calico-node
spec:
nodeSelector:
kubernetes.io/os: linux
hostNetwork: true
tolerations:
# Make sure calico-node gets scheduled on all nodes.
- effect: NoSchedule
operator: Exists
# Mark the pod as a critical add-on for rescheduling.
- key: CriticalAddonsOnly
operator: Exists
- effect: NoExecute
operator: Exists
serviceAccountName: calico-node
# Minimize downtime during a rolling upgrade or deletion; tell Kubernetes to do a "force
# deletion": https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods.
terminationGracePeriodSeconds: 0
priorityClassName: system-node-critical
initContainers:
# This container performs upgrade from host-local IPAM to calico-ipam.
# It can be deleted if this is a fresh installation, or if you have already
# upgraded to use calico-ipam.
- name: upgrade-ipam
image: docker.io/calico/cni:v3.26.1
imagePullPolicy: IfNotPresent
command: ["/opt/cni/bin/calico-ipam", "-upgrade"]
envFrom:
- configMapRef:
# Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode.
name: kubernetes-services-endpoint
optional: true
env:
- name: KUBERNETES_NODE_NAME
valueFrom:
fieldRef:
fieldPath: spec.nodeName
- name: CALICO_NETWORKING_BACKEND
valueFrom:
configMapKeyRef:
name: calico-config
key: calico_backend
volumeMounts:
- mountPath: /var/lib/cni/networks
name: host-local-net-dir
- mountPath: /host/opt/cni/bin
name: cni-bin-dir
securityContext:
privileged: true
# This container installs the CNI binaries
# and CNI network config file on each node.
- name: install-cni
image: docker.io/calico/cni:v3.26.1
imagePullPolicy: IfNotPresent
command: ["/opt/cni/bin/install"]
envFrom:
- configMapRef:
# Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode.
name: kubernetes-services-endpoint
optional: true
env:
# Name of the CNI config file to create.
- name: CNI_CONF_NAME
value: "10-calico.conflist"
# The CNI network config to install on each node.
- name: CNI_NETWORK_CONFIG
valueFrom:
configMapKeyRef:
name: calico-config
key: cni_network_config
# Set the hostname based on the k8s node name.
- name: KUBERNETES_NODE_NAME
valueFrom:
fieldRef:
fieldPath: spec.nodeName
# CNI MTU Config variable
- name: CNI_MTU
valueFrom:
configMapKeyRef:
name: calico-config
key: veth_mtu
# Prevents the container from sleeping forever.
- name: SLEEP
value: "false"
volumeMounts:
- mountPath: /host/opt/cni/bin
name: cni-bin-dir
- mountPath: /host/etc/cni/net.d
name: cni-net-dir
securityContext:
privileged: true
# This init container mounts the necessary filesystems needed by the BPF data plane
# i.e. bpf at /sys/fs/bpf and cgroup2 at /run/calico/cgroup. Calico-node initialisation is executed
# in best effort fashion, i.e. no failure for errors, to not disrupt pod creation in iptable mode.
- name: "mount-bpffs"
image: docker.io/calico/node:v3.26.1
imagePullPolicy: IfNotPresent
command: ["calico-node", "-init", "-best-effort"]
volumeMounts:
- mountPath: /sys/fs
name: sys-fs
# Bidirectional is required to ensure that the new mount we make at /sys/fs/bpf propagates to the host
# so that it outlives the init container.
mountPropagation: Bidirectional
- mountPath: /var/run/calico
name: var-run-calico
# Bidirectional is required to ensure that the new mount we make at /run/calico/cgroup propagates to the host
# so that it outlives the init container.
mountPropagation: Bidirectional
# Mount /proc/ from host which usually is an init program at /nodeproc. It's needed by mountns binary,
# executed by calico-node, to mount root cgroup2 fs at /run/calico/cgroup to attach CTLB programs correctly.
- mountPath: /nodeproc
name: nodeproc
readOnly: true
securityContext:
privileged: true
containers:
# Runs calico-node container on each Kubernetes node. This
# container programs network policy and routes on each
# host.
- name: calico-node
image: docker.io/calico/node:v3.26.1
imagePullPolicy: IfNotPresent
envFrom:
- configMapRef:
# Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode.
name: kubernetes-services-endpoint
optional: true
env:
# Use Kubernetes API as the backing datastore.
- name: DATASTORE_TYPE
value: "kubernetes"
# Wait for the datastore.
- name: WAIT_FOR_DATASTORE
value: "true"
# Set based on the k8s node name.
- name: NODENAME
valueFrom:
fieldRef:
fieldPath: spec.nodeName
# Choose the backend to use.
- name: CALICO_NETWORKING_BACKEND
valueFrom:
configMapKeyRef:
name: calico-config
key: calico_backend
# Cluster type to identify the deployment type
- name: CLUSTER_TYPE
value: "k8s,bgp"
- name: IP_AUTODETECTION_METHOD
value: "interface=ens32"
# Auto-detect the BGP IP address.
- name: IP
value: "autodetect"
# Enable IPIP
- name: CALICO_IPV4POOL_IPIP
value: "Always"
# Enable or Disable VXLAN on the default IP pool.
- name: CALICO_IPV4POOL_VXLAN
value: "Never"
# Enable or Disable VXLAN on the default IPv6 IP pool.
- name: CALICO_IPV6POOL_VXLAN
value: "Never"
# Set MTU for tunnel device used if ipip is enabled
- name: FELIX_IPINIPMTU
valueFrom:
configMapKeyRef:
name: calico-config
key: veth_mtu
# Set MTU for the VXLAN tunnel device.
- name: FELIX_VXLANMTU
valueFrom:
configMapKeyRef:
name: calico-config
key: veth_mtu
# Set MTU for the Wireguard tunnel device.
- name: FELIX_WIREGUARDMTU
valueFrom:
configMapKeyRef:
name: calico-config
key: veth_mtu
# The default IPv4 pool to create on startup if none exists. Pod IPs will be
# chosen from this range. Changing this value after installation will have
# no effect. This should fall within `--cluster-cidr`.
- name: CALICO_IPV4POOL_CIDR
value: "172.16.0.0/12"
# Disable file logging so `kubectl logs` works.
- name: CALICO_DISABLE_FILE_LOGGING
value: "true"
# Set Felix endpoint to host default action to ACCEPT.
- name: FELIX_DEFAULTENDPOINTTOHOSTACTION
value: "ACCEPT"
# Disable IPv6 on Kubernetes.
- name: FELIX_IPV6SUPPORT
value: "false"
- name: FELIX_HEALTHENABLED
value: "true"
securityContext:
privileged: true
resources:
requests:
cpu: 250m
lifecycle:
preStop:
exec:
command:
- /bin/calico-node
- -shutdown
livenessProbe:
exec:
command:
- /bin/calico-node
- -felix-live
- -bird-live
periodSeconds: 10
initialDelaySeconds: 10
failureThreshold: 6
timeoutSeconds: 10
readinessProbe:
exec:
command:
- /bin/calico-node
- -felix-ready
- -bird-ready
periodSeconds: 10
timeoutSeconds: 10
volumeMounts:
# For maintaining CNI plugin API credentials.
- mountPath: /host/etc/cni/net.d
name: cni-net-dir
readOnly: false
- mountPath: /lib/modules
name: lib-modules
readOnly: true
- mountPath: /run/xtables.lock
name: xtables-lock
readOnly: false
- mountPath: /var/run/calico
name: var-run-calico
readOnly: false
- mountPath: /var/lib/calico
name: var-lib-calico
readOnly: false
- name: policysync
mountPath: /var/run/nodeagent
# For eBPF mode, we need to be able to mount the BPF filesystem at /sys/fs/bpf so we mount in the
# parent directory.
- name: bpffs
mountPath: /sys/fs/bpf
- name: cni-log-dir
mountPath: /var/log/calico/cni
readOnly: true
volumes:
# Used by calico-node.
- name: lib-modules
hostPath:
path: /lib/modules
- name: var-run-calico
hostPath:
path: /var/run/calico
- name: var-lib-calico
hostPath:
path: /var/lib/calico
- name: xtables-lock
hostPath:
path: /run/xtables.lock
type: FileOrCreate
- name: sys-fs
hostPath:
path: /sys/fs/
type: DirectoryOrCreate
- name: bpffs
hostPath:
path: /sys/fs/bpf
type: Directory
# mount /proc at /nodeproc to be used by mount-bpffs initContainer to mount root cgroup2 fs.
- name: nodeproc
hostPath:
path: /proc
# Used to install CNI.
- name: cni-bin-dir
hostPath:
path: /opt/cni/bin
- name: cni-net-dir
hostPath:
path: /etc/cni/net.d
# Used to access CNI logs.
- name: cni-log-dir
hostPath:
path: /var/log/calico/cni
# Mount in the directory for host-local IPAM allocations. This is
# used when upgrading from host-local to calico-ipam, and can be removed
# if not using the upgrade-ipam init container.
- name: host-local-net-dir
hostPath:
path: /var/lib/cni/networks
# Used to create per-pod Unix Domain Sockets
- name: policysync
hostPath:
type: DirectoryOrCreate
path: /var/run/nodeagent
---
# Source: calico/templates/calico-kube-controllers.yaml
# See https://github.com/projectcalico/kube-controllers
apiVersion: apps/v1
kind: Deployment
metadata:
name: calico-kube-controllers
namespace: kube-system
labels:
k8s-app: calico-kube-controllers
spec:
# The controllers can only have a single active instance.
replicas: 1
selector:
matchLabels:
k8s-app: calico-kube-controllers
strategy:
type: Recreate
template:
metadata:
name: calico-kube-controllers
namespace: kube-system
labels:
k8s-app: calico-kube-controllers
spec:
nodeSelector:
kubernetes.io/os: linux
tolerations:
# Mark the pod as a critical add-on for rescheduling.
- key: CriticalAddonsOnly
operator: Exists
- key: node-role.kubernetes.io/master
effect: NoSchedule
- key: node-role.kubernetes.io/control-plane
effect: NoSchedule
serviceAccountName: calico-kube-controllers
priorityClassName: system-cluster-critical
containers:
- name: calico-kube-controllers
image: docker.io/calico/kube-controllers:v3.26.1
imagePullPolicy: IfNotPresent
env:
# Choose which controllers to run.
- name: ENABLED_CONTROLLERS
value: node
- name: DATASTORE_TYPE
value: kubernetes
livenessProbe:
exec:
command:
- /usr/bin/check-status
- -l
periodSeconds: 10
initialDelaySeconds: 10
failureThreshold: 6
timeoutSeconds: 10
readinessProbe:
exec:
command:
- /usr/bin/check-status
- -r
periodSeconds: 10
