linux安装mysql

1.下载MySQL
我下载的版本:mysql-5.6.4.tar.gz

2.安装之前先卸载CentOS自带的MySQL
[root@localhost ~]# yum remove mysql

3.编译安装Cmake
下载cmake源码包:http://www.cmake.org/files/v2.8/cmake-2.8.4.tar.gz

从共享目录移至usr目录
[root@localhost ~]# mv /home/user/cmake-2.8.4.tar.gz /usr/cmake-2.8.4.tar.gz
[root@localhost ~]# cd /usr

解压并安装cmake
[root@localhost usr]# tar xzvf cmake-2.8.4.tar.gz
[root@localhost usr]# cd cmake-2.8.4
[root@localhost cmake-2.8.4]# ./bootstrap

---------------------------------------------
CMake 2.8.4, Copyright 2000-2009 Kitware, Inc.
---------------------------------------------
Error when bootstrapping CMake:
Cannot find appropriate C compiler on this system.
Please specify one using environment variable CC.
See cmake_bootstrap.log for compilers attempted.

---------------------------------------------
Log of errors: /usr/local/src/cmake-2.8.4/Bootstrap.cmk/cmake_bootstrap.log
---------------------------------------------
报错:缺少C的编译器
解决办法:安装gcc编译器
[root@localhost ~]# yum install gcc

继续安装Cmake
[root@localhost cmake-2.8.4]# ./bootstrap

---------------------------------------------
CMake 2.8.4, Copyright 2000-2009 Kitware, Inc.
C compiler on this system is: cc
---------------------------------------------
Error when bootstrapping CMake:
Cannot find appropriate C++ compiler on this system.
Please specify one using environment variable CXX.
See cmake_bootstrap.log for compilers attempted.
---------------------------------------------
Log of errors: /usr/local/src/cmake-2.8.4/Bootstrap.cmk/cmake_bootstrap.log
---------------------------------------------
报错:缺少C++编译器 
解决办法:安装gcc-c++编译器
[root@localhost ~]# yum install gcc-c++

再次安装
[root@localhost cmake-2.8.4]# ./bootstrap 
没有报错,编译安装
[root@localhost cmake-2.8.4]# gmake
[root@localhost cmake-2.8.4]# gmake install

 

 

4.正式开始安装MySQL
添加MySQL用户和用户组
[root@localhost ~]# groupadd mysql
[root@localhost ~]# useradd -g mysql mysql

MySQL源码包从共享文件夹移至/usr并解压
[root@localhost ~]# mv /home/user/mysql-5.6.4.tar.gz /usr/mysql-5.6.4.tar.gz
[root@localhost usr]# tar xzvf mysql-5.6.4.tar.gz
[root@localhost usr]# cd mysql-5.6.4

Cmake运行
[root@localhost mysql-5.5.22]# cmake .

开始编译安装
[root@localhost mysql-5.5.22]# make && make install

进入安装目录,将程序二进制的所有权改为root,数据目录的说有权改为mysql用户,更新授权表
[root@localhost mysql-5.5.22]# cd /usr/local/mysql/
[root@localhost mysql]# chown -R root .
[root@localhost mysql]# chown -R mysql .
[root@localhost mysql]# chgrp -R mysql .
[root@localhost mysql]# scripts/mysql_install_db --user=mysql

 

安全启动MySQL(默认密码为空)
[root@localhost mysql]# ./bin/mysqld_safe --user=mysql&

source /etc/profile

报错:

120908 00:16:25 mysqld_safe Logging to '/usr/local/mysql/data/CentOS.err'.
120908 00:16:26 mysqld_safe Starting mysqld daemon with databases from /usr/local/mysql/data

解决方法:
[root@CentOS ~]# cd /usr/local/mysql/data

[root@CentOS data]# ls -l
总用量 29744
-rw-rw---- 1 mysql root 1585 9月 8 00:16 CentOS.err
-rw-rw---- 1 mysql mysql 6 9月 8 00:16 CentOS.pid
-rw-rw---- 1 mysql mysql 18874368 9月 8 00:16 ibdata1
-rw-rw---- 1 mysql mysql 5242880 9月 8 00:16 ib_logfile0
-rw-rw---- 1 mysql mysql 5242880 9月 8 00:16 ib_logfile1
drwxr-xr-x 2 mysql mysql 4096 9月 8 00:14 mysql
-rw-rw---- 1 mysql mysql 27293 9月 8 00:14 mysql-bin.000001
-rw-rw---- 1 mysql mysql 1031892 9月 8 00:14 mysql-bin.000002
-rw-rw---- 1 mysql mysql 107 9月 8 00:16 mysql-bin.000003
-rw-rw---- 1 mysql mysql 57 9月 8 00:16 mysql-bin.index
drwx------ 2 mysql mysql 4096 9月 8 00:14 performance_schema
drwxr-xr-x 2 mysql mysql 4096 9月 8 00:08 test


[root@CentOS data]# chgrp -R mysql CentOS.err
[root@CentOS data]# ls -l
总用量 29736
-rw-rw---- 1 mysql mysql 1585 9月 8 00:16 CentOS.err
-rw-rw---- 1 mysql mysql 6 9月 8 00:16 CentOS.pid
-rw-rw---- 1 mysql mysql 18874368 9月 8 00:16 ibdata1
-rw-rw---- 1 mysql mysql 5242880 9月 8 00:16 ib_logfile0
-rw-rw---- 1 mysql mysql 5242880 9月 8 00:16 ib_logfile1
drwxr-xr-x 2 mysql mysql 4096 9月 8 00:14 mysql
-rw-rw---- 1 mysql mysql 27293 9月 8 00:14 mysql-bin.000001
-rw-rw---- 1 mysql mysql 1031892 9月 8 00:14 mysql-bin.000002
-rw-rw---- 1 mysql mysql 107 9月 8 00:16 mysql-bin.000003
-rw-rw---- 1 mysql mysql 57 9月 8 00:16 mysql-bin.index
drwx------ 2 mysql mysql 4096 9月 8 00:14 performance_schema
drwxr-xr-x 2 mysql mysql 4096 9月 8 00:08 test

 

 

 

配置用户
MySQL启动成功后,root默认没有密码,我们需要设置root密码。
设置之前,我们需要先设置PATH,要不不能直接调用mysql
修改/etc/profile文件,在文件末尾添加

[root@localhost mysql]#vi /etc/profile

复制代码代码如下:
PATH=/usr/local/mysql/bin:$PATH
export PATH

关闭文件,运行下面的命令,让配置立即生效

复制代码代码如下:
[root@localhost mysql]# source /etc/profile


连接本机MySQL
[root@localhost mysql]#mysql –u root –p
提示输入password,默认为空,按Enter即可

断开连接
mysql>exit;

为root账户设置密码
[root@localhost mysql]# mysqladmin -u root password 123456
Enter Password:123456

 

 

设置选项文件,将配置文件拷贝到/etc下
[root@localhost mysql]# cp support-files/my-medium.cnf /etc/mysql.cnf

 

设置开机自启动
[root@localhost mysql]# cp support-files/mysql.server /etc/init.d/mysql
[root@localhost mysql]# chmod +x /etc/init.d/mysql 
[root@localhost mysql]# chkconfig mysql on
 

 

通过服务来启动和关闭Mysql
[root@localhost ~]# service mysql start
[root@localhost ~]# service mysql stop

5.安装设置完毕,之后使用只需启动-连接-断开-关闭,命令如下:
[root@CentOS mysql]# service mysql start
Starting MySQL.. [确定]

 


[root@CentOS mysql]# mysql -u root -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 1
Server version: 5.5.22 Source distribution

Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| performance_schema |
| test |
+--------------------+
4 rows in set (0.07 sec)

mysql> exit;
Bye
[root@CentOS mysql]# service mysql stop
Shutting down MySQL. [确定]

6.其它:
查看进程命令 ps –ef|grep mysqld
kill进程命令 kill –9 进程号

 

 

  


编译mysql出现CMake Error at cmake/readline.cmake:83 (MESSAGE) 

 

-- Could NOT find Curses  (missing:  CURSES_LIBRARY CURSES_INCLUDE_PATH)
CMake Error at cmake/readline.cmake:83 (MESSAGE):
  Curses library not found.  Please install appropriate package,
 
remove CMakeCache.txt and rerun cmake.On Debian/Ubuntu, package name is libncurses5-dev, on Redhat and derivates it is ncurses-devel.
Call Stack (most recent call first):
  cmake/readline.cmake:127 (FIND_CURSES)
  cmake/readline.cmake:217 (MYSQL_USE_BUNDLED_LIBEDIT)
  CMakeLists.txt:257 (MYSQL_CHECK_READLINE) 
 
-- Configuring incomplete, errors occurred!
 
该报错原因是未安装ncurses-devel,运行下面命令
第一步:安装
#yum -y install ncurses-devel
 
第二步:删除CMakeCache.txt
通过find命令找到所有CMakeCache.txt文档的位置
#find / -name CMakeCache.txt
然后全部删除:
# rm -rf /usr/local/src/cmake-2.8.6/Tests/Complex/Cache/CMakeCache.txt
# rm -rf /usr/local/src/cmake-2.8.6/Tests/ComplexOneConfig/Cache/CMakeCache.txt
# rm -rf /usr/local/src/cmake-2.8.6/Tests/ComplexRelativePaths/Cache/CMakeCache.txt
# rm -rf /usr/local/src/mysql-5.5.18/CMakeCache.txt

 

 


解决方法: 
 
1. 改表法。 
 
可能是你的帐号不允许从远程登陆,只能在localhost。这个时候只要在localhost的那台电脑,登入mysql后,更改 "mysql" 数据库里的 "user" 表里的 "host" 项,从"localhost"改称"%"
 
mysql -u root -pvmwaremysql>use mysql;   www.2cto.com  
 
mysql>update user set host = '%' where user = 'root'; 
 
mysql>select host, user from user; 
 
2. 授权法。 
 
例如,你想myuser使用mypassword从任何主机连接到mysql服务器的话。 
 
GRANT ALL PRIVILEGES ON *.* TO 'myuser'@'%' IDENTIFIED BY 'mypassword' WITH GRANT OPTION;
 
FLUSH   PRIVILEGES; 
 
如果你想允许用户myuser从ip为192.168.1.6的主机连接到mysql服务器,并使用mypassword作为密码 
 
GRANT ALL PRIVILEGES ON *.* TO 'myuser'@'192.168.1.3' IDENTIFIED BY 'mypassword' WITH GRANT OPTION;   www.2cto.com  
 
FLUSH   PRIVILEGES; 
 
如果你想允许用户myuser从ip为192.168.1.6的主机连接到mysql服务器的dk数据库,并使用mypassword作为密码 
 
GRANT ALL PRIVILEGES ON dk.* TO 'myuser'@'192.168.1.3' IDENTIFIED BY 'mypassword' WITH GRANT OPTION; 
 
FLUSH   PRIVILEGES;

 

posted @   attitudedecidesall  Views(693)  Comments(0Edit  收藏  举报
编辑推荐:
· 如何做好技术经理
· Kafka 的“无锁哲学”:高效消息流动的背后
· 时间轮在 Netty , Kafka 中的设计与实现
· MySQL 优化利器 SHOW PROFILE 的实现原理
· 在.NET Core中使用异步多线程高效率的处理大量数据
阅读排行:
· 《HelloGitHub》第 105 期
· 一句话,我让 AI 帮我做了个 P 图网站!
· Solon v3.0.5 发布!(Spring 生态可以退休了吗?)
· 记一次 .NET某工业视觉软件 崩溃分析
· 并发编程 - 死锁的产生、排查与解决方案
点击右上角即可分享
微信分享提示