视频信号中xyz的提取

视频信号中xyz的提取

`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company: 
// Engineer: chensimin
// 
// Create Date: 2019/01/15 11:52:24
// Design Name: 
// Module Name: detect_video
// Project Name: 
// Target Devices: 
// Tool Versions: 
// Description: 
// 
// Dependencies: 
// 
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
// 
//////////////////////////////////////////////////////////////////////////////////


module detect_video(

    input    wire          clk,
    input    wire          rst,

    output   reg   [9:0]   vid_out = 0 ,

    output   wire          xyz

    );


//------------------------------------------------------------------

reg  [7:0] i = 0;

always @(posedge clk or posedge rst)
begin
    if(rst)
    begin
        i       <= 0;
        vid_out <= 10'h000;
    end 
    else 
    begin
        case(i)
        0:
        begin
            i <= i + 1'b1;
            vid_out <= 10'h000;
        end
        1:
        begin
            i <= i + 1'b1;
            vid_out <= 10'h3FF;
        end
        2:
        begin
            i <= i + 1'b1;
            vid_out <= 10'h000;
        end
        3:
        begin
            i <= i + 1'b1;
            vid_out <= 10'h000;
        end        
        4:
        begin
            i <= i + 1'b1;
            vid_out <= 10'h274;
        end    
        5:
        begin
            i <= i + 1'b1;
            vid_out <= 10'h000;        
        end    
        6:
        begin
            i <= i + 1'b1;
            vid_out <= 10'h080;        
        end        
        default:
        begin
            i <= i;
            vid_out <= 10'h000;
        end
        endcase 
    end 
end



detect_xyz U0 (

    .clk(clk),
    .rst(rst),
    .vid_in(vid_out),
    .xyz(xyz)
);


endmodule



/*



add_force {/detect_video/clk} -radix hex {1 0ns} {0 50000ps} -repeat_every 100000ps
add_force {/detect_video/rst} -radix hex {1 0ns} {0 200ns}



*/

 

`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company: 
// Engineer: chensimin
// 
// Create Date: 2019/01/15 13:30:22
// Design Name: 
// Module Name: detect_xyz
// Project Name: 
// Target Devices: 
// Tool Versions: 
// Description: 
// 
// Dependencies: 
// 
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
// 
//////////////////////////////////////////////////////////////////////////////////


module detect_xyz (

    input        wire               clk,
    input        wire               rst,
    input        wire       [9:0]   vid_in,

    output       reg                xyz

    );


//------------------------------------------------------------------

reg [9:0]vid_in_delay_0 = 0;
reg [9:0]vid_in_delay_1 = 0;

reg xyz = 0;

always @(posedge clk or posedge rst)
begin
    if(rst)
    begin
        vid_in_delay_0 <= 10'h000;
        vid_in_delay_1 <= 10'h000;
    end

    else 
    begin
        vid_in_delay_0 <= vid_in;
        vid_in_delay_1 <= vid_in_delay_0;

        if( vid_in_delay_1 == 10'h3FF && vid_in_delay_0 == 10'h000 
            && vid_in == 10'h000)
            xyz <= 1;
        else 
            xyz <= 0;
    end
end


endmodule

 

仿真结果：