PVE开启硬件显卡直通功能
首先编辑GRUB配置文件:
root@pve:~# vim /etc/default/grub
root@pve:~#
root@pve:~# cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on video=efifb:off"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
root@pve:~#
开启IOMMU支持:
GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on video=efifb:off"
如果是AMD的CPU:
GRUB_CMDLINE_LINUX_DEFAULT="quiet amd_iommu=on video=efifb:off"
更新GRUB:
root@pve:~# update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-5.11.22-5-pve
Found initrd image: /boot/initrd.img-5.11.22-5-pve
Found linux image: /boot/vmlinuz-5.11.22-4-pve
Found initrd image: /boot/initrd.img-5.11.22-4-pve
Found memtest86+ image: /boot/memtest86+.bin
Found memtest86+ multiboot image: /boot/memtest86+_multiboot.bin
done
root@pve:~#
添加所需的系统模块(驱动):
root@pve:~#
root@pve:~# echo "vfio" >> /etc/modules
root@pve:~# echo "vfio_iommu_type1" >> /etc/modules
root@pve:~# echo "vfio_pci" >> /etc/modules
root@pve:~# echo "vfio_virqfd" >> /etc/modules
root@pve:~#
root@pve:~# cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Generated by sensors-detect on Fri Sep 24 17:22:44 2021
# Chip drivers
coretemp
vfio
vfio_iommu_type1
vfio_pci
vfio_virqfd
接着添加模块(驱动)黑名单,即让GPU设备在下次系统启动之后不使用这些驱动,把设备腾出来给vfio驱动用:
Intel核显:
echo "blacklist snd_hda_intel" >> /etc/modprobe.d/pve-blacklist.conf
echo "blacklist snd_hda_codec_hdmi" >> /etc/modprobe.d/pve-blacklist.conf
echo "blacklist i915" >> /etc/modprobe.d/pve-blacklist.conf
N卡/A卡:
echo "blacklist nouveau" >> /etc/modprobe.d/pve-blacklist.conf
echo "blacklist radeon" >> /etc/modprobe.d/pve-blacklist.conf
如果是N卡还需要加入下面的配置到kvm.conf(据老外说是避免一些莫名其妙的错误):
echo "options kvm ignore_msrs=1" > /etc/modprobe.d/kvm.conf
root@pve:~# echo "blacklist nouveau" >> /etc/modprobe.d/pve-blacklist.conf
root@pve:~# echo "blacklist radeon" >> /etc/modprobe.d/pve-blacklist.conf
root@pve:~#
root@pve:~# cat /etc/modprobe.d/pve-blacklist.conf
# This file contains a list of modules which are not supported by Proxmox VE
# nidiafb see bugreport https://bugzilla.proxmox.com/show_bug.cgi?id=701
blacklist nvidiafb
blacklist nouveau
blacklist radeon
root@pve:~#
root@pve:~# echo "options kvm ignore_msrs=1" > /etc/modprobe.d/kvm.conf
root@pve:~#
root@pve:~# cat /etc/modprobe.d/kvm.conf
options kvm ignore_msrs=1
更新内核:
root@pve:~# update-initramfs -u
update-initramfs: Generating /boot/initrd.img-5.11.22-5-pve
Running hook script 'zz-proxmox-boot'..
Re-executing '/etc/kernel/postinst.d/zz-proxmox-boot' in new private mount namespace..
No /etc/kernel/proxmox-boot-uuids found, skipping ESP sync.
root@pve:~#
重启机器:
root@pve:~# reboot
重启上来之后检查模块是否正常加载:
root@pve:~# lsmod | grep vfio
vfio_pci 57344 1
vfio_virqfd 16384 1 vfio_pci
irqbypass 16384 11 vfio_pci,kvm
vfio_iommu_type1 36864 1
vfio 36864 5 vfio_iommu_type1,vfio_pci
root@pve:~#
查看显卡
root@pve:~# lspci -nn | grep NV
86:00.0 3D controller [0302]: NVIDIA Corporation TU104GL [Tesla T4] [10de:1eb8] (rev a1)
root@pve:~#
root@pve:~#
查看显卡ID,写入到配置中
root@pve:~# lspci -n -s 86:00
86:00.0 0302: 10de:1eb8 (rev a1)
root@pve:~#
root@pve:~#
root@pve:~# echo "options vfio-pci ids=10de:1eb8" > /etc/modprobe.d/vfio.conf
root@pve:~#
https://blog.csdn.net/qq_33921750
https://my.oschina.net/u/3981543
https://www.zhihu.com/people/chen-bu-yun-2
https://segmentfault.com/u/hppyvyv6/articles
https://juejin.cn/user/3315782802482007
https://space.bilibili.com/352476552/article
https://cloud.tencent.com/developer/column/93230
知乎、CSDN、开源中国、思否、掘金、哔哩哔哩、腾讯云