[openEuler]关于报错cannot install the best update candidate for package

① 直接po指令

#可能是与上次更新缓存冲突了,按顺序输入以下指令
#如果没有【dnf】就使用【yum】
sudo dnf clean all sudo dnf check
&& dnf check-update sudo dnf update

② 亦或者是包冲突了

#以下这条指令有风险,请确认好后谨慎使用 #冲突的包改成那个包名
sudo
dnf remove #冲突的包

③ 下下策:删除EPEL源再跑一次①

sudo dnf emove epel-release -y

④ 下下下策:使用参数【非优选版本】

sudo dnf update --nobest

⑤ 亦或者是当前系统版本太新,没有包,拿就只能等了

 


 

顺便po一下openEuler的yum源,菜,华为源自己给的命令都不对的

[OS]
name=OS
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/OS/$basearch/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever/OS&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/OS/$basearch/RPM-GPG-KEY-openEuler

[everything]
name=everything
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/everything/$basearch/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever/everything&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/everything/$basearch/RPM-GPG-KEY-openEuler

[EPOL]
name=EPOL
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/EPOL/$basearch/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever/EPOL/main&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/OS/$basearch/RPM-GPG-KEY-openEuler

[debuginfo]
name=debuginfo
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/debuginfo/$basearch/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever/debuginfo&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/debuginfo/$basearch/RPM-GPG-KEY-openEuler

[source]
name=source
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/source/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever&arch=source
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/source/RPM-GPG-KEY-openEuler

[update]
name=update
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/update/$basearch/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever/update&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/OS/$basearch/RPM-GPG-KEY-openEuler

[update-source]
name=update-source
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/update/source/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever/update&arch=source
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP1/source/RPM-GPG-KEY-openEuler

 

#generic-repos is licensed under the Mulan PSL v2.
#You can use this software according to the terms and conditions of the Mulan PSL v2.
#You may obtain a copy of Mulan PSL v2 at:
#    http://license.coscl.org.cn/MulanPSL2
#THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
#IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
#PURPOSE.
#See the Mulan PSL v2 for more details.

[OS]
name=OS
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/OS/$basearch/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever/OS&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/OS/$basearch/RPM-GPG-KEY-openEuler

[everything]
name=everything
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/everything/$basearch/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever/everything&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/everything/$basearch/RPM-GPG-KEY-openEuler

[EPOL]
name=EPOL
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/EPOL/main/$basearch/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever/EPOL/main&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/OS/$basearch/RPM-GPG-KEY-openEuler

[debuginfo]
name=debuginfo
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/debuginfo/$basearch/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever/debuginfo&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/debuginfo/$basearch/RPM-GPG-KEY-openEuler

[source]
name=source
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/source/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever&arch=source
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/source/RPM-GPG-KEY-openEuler

[update]
name=update
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/update/$basearch/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever/update&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/OS/$basearch/RPM-GPG-KEY-openEuler

[update-source]
name=update-source
baseurl=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/update/source/
metalink=https://mirrors.openeuler.org/metalink?repo=$releasever/update&arch=source
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=http://repo.openeuler.org/openEuler-20.03-LTS-SP4/source/RPM-GPG-KEY-openEuler

 

还有openEuler的华为源

[OS]
name=OS
baseurl=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/OS/$basearch/
metalink=https://mirrors.openeuler.org/openeuler/metalink?repo=$releasever/OS&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/OS/$basearch/RPM-GPG-KEY-openEuler

[everything]
name=everything
baseurl=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/everything/$basearch/
metalink=https://mirrors.openeuler.org/openeuler/metalink?repo=$releasever/everything&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/everything/$basearch/RPM-GPG-KEY-openEuler

[EPOL]
name=EPOL
baseurl=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/EPOL/main/$basearch/
metalink=https://mirrors.openeuler.org/openeuler/metalink?repo=$releasever/EPOL/main&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/OS/$basearch/RPM-GPG-KEY-openEuler

[debuginfo]
name=debuginfo
baseurl=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/debuginfo/$basearch/
metalink=https://mirrors.openeuler.org/openeuler/metalink?repo=$releasever/debuginfo&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/debuginfo/$basearch/RPM-GPG-KEY-openEuler

[source]
name=source
baseurl=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/source/
metalink=https://mirrors.openeuler.org/openeuler/metalink?repo=$releasever&arch=source
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/source/RPM-GPG-KEY-openEuler

[update]
name=update
baseurl=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/update/$basearch/
metalink=https://mirrors.openeuler.org/openeuler/metalink?repo=$releasever/update&arch=$basearch
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/OS/$basearch/RPM-GPG-KEY-openEuler

[update-source]
name=update-source
baseurl=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/update/source/
metalink=https://mirrors.openeuler.org/openeuler/metalink?repo=$releasever/update&arch=source
metadata_expire=1h
enabled=1
gpgcheck=1
gpgkey=https://mirrors.huaweicloud.com/openeuler/openEuler-22.03-LTS-SP3/source/RPM-GPG-KEY-openEuler

 

还有openEuler的EPEL(powerTools不可用)

[epel]
name=EPEL in openEuler - $releasever_$basearch
# It is much more secure to use the #metalink, but if you wish to use a local mirror
# place its address here.
baseurl=https://repo.huaweicloud.com/epel/8/Everything/$basearch
#metalink=https://mirrors.fedoraproject.org/#metalink?repo=epel-$releasever&arch=$basearch&infra=$infra&content=$contentdir
enabled=1
gpgcheck=0
countme=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8

[epel-debuginfo]
name=EPEL in openEuler - $releasever_$basearch - Debug
# It is much more secure to use the #metalink, but if you wish to use a local mirror
# place its address here.
baseurl=https://repo.huaweicloud.com/epel/$releasever/Everything/$basearch/debug
#metalink=https://mirrors.fedoraproject.org/#metalink?repo=epel-debug-$releasever&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8
gpgcheck=0

[epel-source]
name=EPEL in openEuler - $releasever_$basearch - Source
# It is much more secure to use the #metalink, but if you wish to use a local mirror
# place it's address here.
baseurl=https://repo.huaweicloud.com/$releasever/Everything/source/tree/
#metalink=https://mirrors.fedoraproject.org/#metalink?repo=epel-source-$releasever&arch=$basearch&infra=$infra&content=$contentdir
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-8
gpgcheck=0

[powertools]
name=PowerTools in CentOS Linux - $basearch
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=PowerTools&infra=$infra
baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos/8-stream/PowerTools/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial

 

posted on 2023-12-19 17:19  Cela  阅读(158)  评论(0编辑  收藏  举报

导航

Copyright ©Cela
Design by Cela