vimrc

" All system-wide defaults are set in $VIMRUNTIME/debian.vim and sourced by
" the call to :runtime you can find below.  If you wish to change any of those
" settings, you should do it in this file (/etc/vim/vimrc), since debian.vim
" will be overwritten everytime an upgrade of the vim packages is performed.
" It is recommended to make changes after sourcing debian.vim since it alters
" the value of the 'compatible' option.

" This line should not be removed as it ensures that various options are
" properly set to work with the Vim-related packages available in Debian.
runtime! debian.vim
" Uncomment the next line to make Vim more Vi-compatible
" NOTE: debian.vim sets 'nocompatible'.  Setting 'compatible' changes numerous
" options, so any other options should be set AFTER setting 'compatible'.
"set compatible

" Vim5 and later versions support syntax highlighting. Uncommenting the next
" line enables syntax highlighting by default.
if has("syntax")
  syntax on
endif

" If using a dark background within the editing area and syntax highlighting
" turn on this option as well
"set background=dark

" Uncomment the following to have Vim jump to the last position when
" reopening a file
"if has("autocmd")
"  au BufReadPost * if line("'\"") > 1 && line("'\"") <= line("$") | exe "normal! g'\"" | endif
"endif

" Uncomment the following to have Vim load indentation rules and plugins
" according to the detected filetype.
"if has("autocmd")
"  filetype plugin indent on
"endif

" The following are commented out as they cause vim to behave a lot
" differently from regular Vi. They are highly recommended though.
set showcmd        " Show (partial) command in status line.
set showmatch        " Show matching brackets.
"set ignorecase        " Do case insensitive matching
"set smartcase        " Do smart case matching
"set incsearch        " Incremental search
set autowrite        " Automatically save before commands like :next and :make
"set hidden        " Hide buffers when they are abandoned
set mouse=a        " Enable mouse usage (all modes)

" Source a global configuration file if available
if filereadable("/etc/vim/vimrc.local")
  source /etc/vim/vimrc.local
endif

set nu
set tabstop=4
set softtabstop=4
set shiftwidth=4
"set smartindent
set cursorline
set ruler
"set autoindent
set showcmd
set formatoptions=tcrqn    "自动格式化
set clipboard+=unnamed
set autowrite
"set confirm
set smarttab
set history=1000
set autoread
"禁止生成临时文件
set nobackup
set noswapfile

set foldenable    "允许折叠
set foldmethod=manual    "手动折叠

" 匹配括号高亮的时间（单位是十分之一秒）
set matchtime=1

set backspace=2
" 允许backspace和光标键跨越行边界

map<F2> :call AddHeader()<CR>
"auto BufNewFile *.cpp exec ":call AddHeader()"
func AddHeader()
if &filetype == 'cpp'
call setline(line("."),"#include <stdio.h>")
let l=line(".")-1
let l=l+1 | call append(l,"#include <queue>")
let l=l+1 | call append(l,"#include <cstring>")
let l=l+1 | call append(l,"#include <cstdlib>")
let l=l+1 | call append(l,"#include <algorithm>")
let l=l+1 | call append(l,"#include <vector>")
let l=l+1 | call append(l,"#include <map>")
let l=l+1 | call append(l,"#include <set>")
let l=l+1 | call append(l,"#include <ctime>")
let l=l+1 | call append(l,"#include <cmath>")
let l=l+1 | call append(l,"#include <cctype>")
endif
autocmd BufNewFile * normal Gkkk
endfunc

auto BufNewFile *.cpp exec ":call Addline()"
map<F3> :call Addline()<CR>
func Addline()
if &filetype == 'cpp'
call setline(line("."),"#include <bits/stdc++.h>")
let l=line(".")-1
let l=l+1 | call append(l,"using namespace std;")
let l=l+1 | call append(l,"typedef long long LL;")
let l=l+1 | call append(l,"const int N=1e5+10;")
let l=l+1 | call append(l,"const int INF=0x3f3f3f3f;")
let l=l+1 | call append(l,"int cas=1,T;")
let l=l+1 | call append(l,"int main()")
let l=l+1 | call append(l,"{")
let l=l+1 | call append(l,"//    freopen(\"1.in\",\"w\",stdout);")
let l=l+1 | call append(l,"//    freopen(\"1.in\",\"r\",stdin);")
let l=l+1 | call append(l,"//    freopen(\"1.out\",\"w\",stdout);")
let l=l+1 | call append(l,"//    scanf(\"%d\",&T);")
let l=l+1 | call append(l,"//    cerr<<\"time=\"<<(double)clock()/CLOCKS_PER_SEC<<endl;")
let l=l+1 | call append(l,"    return 0;")
let l=l+1 | call append(l,"}")
endif
autocmd BufNewFile * normal Gkk
endfunc


"编码相关
set encoding=utf-8
set fileencoding=chinese
set fileencodings=ucs-bom,utf-8,chinese
set termencoding=utf-8

" 自动切换目录为当前编辑文件所在目录
au BufRead,BufNewFile,BufEnter * cd %:p:h
" 如果你想保存到你的文档下也可以在_vimrc中添加：
cd G:\cpp

"键盘命令
""""""""""""""""""""""""""""""""""""""""""""""""""
nmap <leader>w :w!<cr>
nmap <leader>f :find<cr>
"映射全选+复制 ctrl+a
map <C-A> <Esc>ggVGY
"map! <C-A> <Esc>ggVGY
map <F12> gg=G
"选中状态下 ctrl+c 复制
vmap <C-c> "+y
map zz 0i//<Esc>
map tt 0lli<Backspace><Backspace><Esc>

"C，C++ 按F5编译运行
map <F5> :call CompileRunGcc()<CR>
func! CompileRunGcc()
:w
    if &filetype == 'c'
    :! gcc % -o %<
    :! %<.exe
elseif &filetype == 'cpp'
    ":! g++ -std=c++11 % -o %<
    ":! %<.exe
    :!g++ -std=c++11 % -o G:/exe/%<
    :! G:/exe/%<.exe
elseif &filetype == 'java' 
    :! javac % 
    :! java %<
elseif &filetype == 'sh'
    :! %<.sh
elseif &filetype == 'html'
    :! chrome G:/cpp/%
else
    :!python G:/cpp/%
endif
endfunc

"          getline('.')获取当前行字符串    line('.')获取当前行行号
"          col('.')获取当前列号
"自动补全
"inoremap ( ()<Left>
"inoremap ) <c-r>=ClosePair(')')<CR>
"inoremap { {}<Left>
"inoremap } <c-r>=ClosePair('}')<CR>
"inoremap [ []<Left>
"inoremap ] <c-r>=ClosePair(']')<CR>
"inoremap <CR> <c-r>=Line('}')<CR>
"inoremap " <c-r>=Pair('"')<CR>
"inoremap ' <c-r>=Pair("\'")<CR>
function! Line(char)
if getline('.')[col('.')-1] == a:char
    return "\<CR>\<CR>\<Up>\t"
else
    return "\<CR>"
endif
endfunction
function! Pair(char)
if getline('.')[col('.')-1] == a:char
    return "\<Right>"
else
    let s=a:char.a:char."\<Left>"
    return s
endif
endfunction
function! ClosePair(char)
if getline('.')[col('.') - 1] == a:char
    return "\<Right>"
    else
        return a:char
endif
endfunction
filetype plugin indent on 
"打开文件类型检测, 加了这句才可以用智能补全
set completeopt=longest,menu
""""""""""""""""""""""""'""

" 显示相关 
" """""""""""""""""""
set shortmess=atI " 启动的时候不显示那个援助乌干达儿童的提示 
winpos -4 -4 " 设定窗口位置 
set lines=40 columns=170 " 设定窗口大小 
" "set nu " 显示行号 
" set go= " 不要图形按钮 
colorscheme desert " 设置背景主题 
set guifont=Consolas:h14:cANSI " 设置字体 
" "syntax on " 语法高亮 
" autocmd InsertLeave * se nocul " 用浅色高亮当前行 
"autocmd InsertEnter * se cul " 用浅色高亮当前行 
" "set ruler " 显示标尺 
" set showcmd " 输入的命令显示出来，看的清楚些 
set cmdheight=1 " 命令行（在状态行下）的高度，设置为1 
"set whichwrap+=<,>,h,l " 允许backspace和光标键跨越行边界(不建议) 
set scrolloff=10 " 光标移动到buffer的顶部和底部时保持3行距离 
"set novisualbell " 不要闪烁(不明白) 
" set statusline=%F%m%r%h%w\ [FORMAT=%{
" &ff}]\ [TYPE=%Y]\ [POS=%l,%v][%p%%]\ %{
" strftime(\"%d/%m/%y\ -\ %H:%M\")} "状态行显示的内容 
" set laststatus=1 " 启动显示状态行(1),总是显示状态行(2) 
" set foldenable " 允许折叠 
" set foldmethod=manual " 手动折叠 
"set background=dark "背景使用黑色 
" set nocompat
"
  
" 解决菜单乱码  
"-----------------------------------  
set langmenu=zh_CN  
let $LANG = 'zh_CN.UTF-8'  
source $VIMRUNTIME/delmenu.vim  
source $VIMRUNTIME/menu.vim  
  
source $VIMRUNTIME/vimrc_example.vim  
source $VIMRUNTIME/mswin.vim  
behave mswin  
"-----------------------------------  
  
"////////////////////////////////////////////////////////////////////////////////////////  
"vim 提示信息乱码解决方法  
"language messages zh_CN.UTF-8  
if has("win32")  
set termencoding=chinese  
language message zh_CN.UTF-8  
endif  

" All system-wide defaults are set in $VIMRUNTIME/debian.vim and sourced by
" the call to :runtime you can find below.  If you wish to change any of those
" settings, you should do it in this file (/etc/vim/vimrc), since debian.vim
" will be overwritten everytime an upgrade of the vim packages is performed.
" It is recommended to make changes after sourcing debian.vim since it alters
" the value of the 'compatible' option.

" This line should not be removed as it ensures that various options are
" properly set to work with the Vim-related packages available in Debian.
runtime! debian.vim
" Uncomment the next line to make Vim more Vi-compatible
" NOTE: debian.vim sets 'nocompatible'.  Setting 'compatible' changes numerous
" options, so any other options should be set AFTER setting 'compatible'.
"set compatible

" Vim5 and later versions support syntax highlighting. Uncommenting the next
" line enables syntax highlighting by default.
if has("syntax")
  syntax on
endif

" If using a dark background within the editing area and syntax highlighting
" turn on this option as well
"set background=dark

" Uncomment the following to have Vim jump to the last position when
" reopening a file
"if has("autocmd")
"  au BufReadPost * if line("'\"") > 1 && line("'\"") <= line("$") | exe "normal! g'\"" | endif
"endif

" Uncomment the following to have Vim load indentation rules and plugins
" according to the detected filetype.
"if has("autocmd")
"  filetype plugin indent on
"endif

" The following are commented out as they cause vim to behave a lot
" differently from regular Vi. They are highly recommended though.
set showcmd        " Show (partial) command in status line.
set showmatch        " Show matching brackets.
"set ignorecase        " Do case insensitive matching
"set smartcase        " Do smart case matching
"set incsearch        " Incremental search
set autowrite        " Automatically save before commands like :next and :make
"set hidden        " Hide buffers when they are abandoned
"set mouse=a        " Enable mouse usage (all modes)

" Source a global configuration file if available
if filereadable("/etc/vim/vimrc.local")
  source /etc/vim/vimrc.local
endif

set nu
set tabstop=4
set softtabstop=4
set shiftwidth=4
"set smartindent
set cursorline
set ruler
"set autoindent
set showcmd
set formatoptions=tcrqn    "自动格式化
set clipboard+=unnamed
set autowrite
"set confirm
set smarttab
set history=1000
set autoread
"禁止生成临时文件
set nobackup
set noswapfile

set foldenable    "允许折叠
set foldmethod=manual    "手动折叠

" 匹配括号高亮的时间（单位是十分之一秒）
set matchtime=1

set backspace=2
" 允许backspace和光标键跨越行边界

map<F2> :call AddHeader()<CR>
"auto BufNewFile *.cpp exec ":call AddHeader()"
func AddHeader()
if &filetype == 'cpp'
call setline(line("."),"#include <stdio.h>")
let l=line(".")-1
let l=l+1 | call append(l,"#include <queue>")
let l=l+1 | call append(l,"#include <cstring>")
let l=l+1 | call append(l,"#include <cstdlib>")
let l=l+1 | call append(l,"#include <algorithm>")
let l=l+1 | call append(l,"#include <vector>")
let l=l+1 | call append(l,"#include <map>")
let l=l+1 | call append(l,"#include <set>")
let l=l+1 | call append(l,"#include <ctime>")
let l=l+1 | call append(l,"#include <cmath>")
let l=l+1 | call append(l,"#include <cctype>")
endif
autocmd BufNewFile * normal Gkkk
endfunc

auto BufNewFile *.cpp exec ":call Addline()"
map<F3> :call Addline()<CR>
func Addline()
if &filetype == 'cpp'
call setline(line("."),"#include <bits/stdc++.h>")
let l=line(".")-1
let l=l+1 | call append(l,"using namespace std;")
let l=l+1 | call append(l,"typedef long long LL;")
let l=l+1 | call append(l,"const int N=1e5+10;")
let l=l+1 | call append(l,"const int INF=0x3f3f3f3f;")
let l=l+1 | call append(l,"int cas=1,T;")
let l=l+1 | call append(l,"int main()")
let l=l+1 | call append(l,"{")
let l=l+1 | call append(l,"//    freopen(\"1.in\",\"w\",stdout);")
let l=l+1 | call append(l,"//    freopen(\"1.in\",\"r\",stdin);")
let l=l+1 | call append(l,"//    freopen(\"1.out\",\"w\",stdout);")
let l=l+1 | call append(l,"//    scanf(\"%d\",&T);")
let l=l+1 | call append(l,"//    cerr<<\"time=\"<<(double)clock()/CLOCKS_PER_SEC<<endl;")
let l=l+1 | call append(l,"    return 0;")
let l=l+1 | call append(l,"}")
endif
autocmd BufNewFile * normal Gkk
endfunc


"编码相关
set encoding=utf-8
set fileencoding=chinese
set fileencodings=ucs-bom,utf-8,chinese
set termencoding=utf-8

" 自动切换目录为当前编辑文件所在目录
au BufRead,BufNewFile,BufEnter * cd %:p:h
" 如果你想保存到你的文档下也可以在_vimrc中添加：
"cd G:\cpp

"键盘命令
""""""""""""""""""""""""""""""""""""""""""""""""""
nmap <leader>w :w!<cr>
nmap <leader>f :find<cr>
"映射全选+复制 ctrl+a
map <C-A> <Esc>ggVGY
"map! <C-A> <Esc>ggVGY
map <F12> gg=G
"选中状态下 ctrl+c 复制
vmap <C-c> "+y
map P "+p
map zz 0i//<esc>
map tt 0lli<Backspace><Backspace><Esc>

"C，C++ 按F5编译运行
map <F5> :call CompileRunGcc()<CR>
func! CompileRunGcc()
:w
    if &filetype == 'c'
    :! gcc % -o %<
    :! ./%<
elseif &filetype == 'cpp'
    :! g++ -std=c++11 % -o %<
    :! ./%<
    ":!g++ -std=c++11 % -o G:/exe/%<
    ":! G:/exe/%<.exe
elseif &filetype == 'java' 
    :! javac % 
    :! java %<
elseif &filetype == 'sh'
    :! bash %
elseif &filetype == 'html'
    :! chrome %
    ":! chrome G:/cpp/%
elseif &filetype == 'python'
    :! python3 %
    ":!python G:/cpp/%
elseif &filetype == 'javascript'
    :! node %
elseif &filetype == 'go'
    :! go run %
endif
endfunc

"          getline('.')获取当前行字符串    line('.')获取当前行行号
"          col('.')获取当前列号
"自动补全
"inoremap ( ()<Left>
"inoremap ) <c-r>=ClosePair(')')<CR>
"inoremap { {}<Left>
"inoremap } <c-r>=ClosePair('}')<CR>
"inoremap [ []<Left>
"inoremap ] <c-r>=ClosePair(']')<CR>
"inoremap <CR> <c-r>=Line('}')<CR>
"inoremap " <c-r>=Pair('"')<CR>
"inoremap ' <c-r>=Pair("\'")<CR>
function! Line(char)
if getline('.')[col('.')-1] == a:char
    return "\<CR>\<CR>\<Up>\t"
else
    return "\<CR>"
endif
endfunction
function! Pair(char)
if getline('.')[col('.')-1] == a:char
    return "\<Right>"
else
    let s=a:char.a:char."\<Left>"
    return s
endif
endfunction
function! ClosePair(char)
if getline('.')[col('.') - 1] == a:char
    return "\<Right>"
    else
        return a:char
endif
endfunction
filetype plugin indent on 
"打开文件类型检测, 加了这句才可以用智能补全
set completeopt=longest,menu
""""""""""""""""""""""""'""

" 显示相关 
" """""""""""""""""""
set shortmess=atI " 启动的时候不显示那个援助乌干达儿童的提示 
winpos -4 -4 " 设定窗口位置 
set lines=40 columns=170 " 设定窗口大小 
" "set nu " 显示行号 
" set go= " 不要图形按钮 
colorscheme desert " 设置背景主题 
set guifont=Consolas:h14:cANSI " 设置字体 
" "syntax on " 语法高亮 
" autocmd InsertLeave * se nocul " 用浅色高亮当前行 
"autocmd InsertEnter * se cul " 用浅色高亮当前行 
" "set ruler " 显示标尺 
" set showcmd " 输入的命令显示出来，看的清楚些 
set cmdheight=1 " 命令行（在状态行下）的高度，设置为1 
"set whichwrap+=<,>,h,l " 允许backspace和光标键跨越行边界(不建议) 
set scrolloff=10 " 光标移动到buffer的顶部和底部时保持3行距离 
"set novisualbell " 不要闪烁(不明白) 
" set statusline=%F%m%r%h%w\ [FORMAT=%{
" &ff}]\ [TYPE=%Y]\ [POS=%l,%v][%p%%]\ %{
" strftime(\"%d/%m/%y\ -\ %H:%M\")} "状态行显示的内容 
" set laststatus=1 " 启动显示状态行(1),总是显示状态行(2) 
" set foldenable " 允许折叠 
" set foldmethod=manual " 手动折叠 
"set background=dark "背景使用黑色 
" set nocompat
"
  
" 解决菜单乱码  
"-----------------------------------  
set langmenu=zh_CN  
let $LANG = 'zh_CN.UTF-8'  
source $VIMRUNTIME/delmenu.vim  
source $VIMRUNTIME/menu.vim  
  
"source $VIMRUNTIME/vimrc_example.vim  
"source $VIMRUNTIME/mswin.vim  
behave mswin  
"-----------------------------------  
  
"////////////////////////////////////////////////////////////////////////////////////////  
"vim 提示信息乱码解决方法  
"language messages zh_CN.UTF-8  
if has("win32")  
set termencoding=chinese  
language message zh_CN.UTF-8  
endif  


"taglist
let Tlist_Show_One_File=1
let Tlist_Exit_OnlyWindow=1
"winmanager
let g:winManagerWindowLayout='FileExplorer|TagList'
nmap wm :WMToggle<cr>