Experience of using small jaw crushers to share

Experience of using small jaw crushers to share

Zhengzhou Hongxing is a professional production of sand and gravel production line, large-scale enterprises in the mineral processing equipment, the company strength, well-equipped to provide satisfactory equipment for national and foreign customers. Zhengzhou Hongxing used in the past, users experience in the production base of small jaw crusher feedback machine, summed up the experience in the use of small broken jaw, to share with you.
Metal lead ore slurry electrolysis conditions: electrolyte concentration of the metallic lead of lead ore crusher price, current density metallic lead electrolyzer voltage. The main technical indicators: Lead leaching rate of 98 slag containing lead 1.57, the residue was 39.3, the consumption of electricity lead to 500kW. Galena slurry electrolysis in a bath complete the galena oxidation and precipitation of the metallic lead two processes, and basic elimination of lead pollution.
Sand production line broken jaw is a motor driven mechanical forces on the hard material crushing operations, so that the materials into different specifications of the broken machine. Coarse and fine broken, fine broken more than 50% of the content of particles larger than 3 mm of the total high capacity, small broken more than 50% of the content of the total particle size of less than 3 mm high capacity.
Generally small jaw crusher sand and gravel production line work should note the following:
1, the rack is used for supporting the eccentric shaft and subjected to the reaction of crushing materials, be sure to use high-quality cast steel piece casting.
2, the eccentric shaft is the main axis of the crusher, by the great bend torque, high carbon steel. Eccentric shaft at one end mounted pulley and the other end mounted to the flywheel. Hand drive fixed flywheel or pulling the belt to confirm that the device is rotating flexible in order to no-load test.
3. The jaw plate with bolts and wedge fixed bed in the jaw, often to check the wear of the crusher either side of the board, such as badly worn and should be replaced. Strictly in accordance with the process requirements, adjust the opening size of the palate.
Cement is the key ingredient in concrete products. Comprising roughly 12% of the average residential-grade ready mix concrete, cement is the binding agent that holds sand and other aggregates together in a hard, stone-like mass. Portland cement accounts for about 95% of the cement produced in North America. It was patented in England by Joseph Aspdin in 1824 and named after a quarried stone crusher it resembled from the Isle of Portland.