[Topic] Machine/Deep Learning Interview Questions

Machine/Deep Learning Interview Questions

Algorithms/Theory

Q1- What’s the trade-off between bias and variance?

More reading: Bias-Variance Tradeoff (Wikipedia)

Bias is error due to erroneous or overly simplistic assumptions in the learning algorithm you’re using. This can lead to the model underfitting your data, making it hard for it to have high predictive accuracy and for you to generalize your knowledge from the training set to the test set.

Variance is error due to too much complexity in the learning algorithm you’re using. This leads to the algorithm being highly sensitive to high degrees of variation in your training data, which can lead your model to overfit the data. You’ll be carrying too much noise from your training data for your model to be very useful for your test data.

The bias-variance decomposition essentially decomposes the learning error from any algorithm by adding the bias, the variance and a bit of irreducible error due to noise in the underlying dataset. Essentially, if you make the model more complex and add more variables, you’ll lose bias but gain some variance — in order to get the optimally reduced amount of error, you’ll have to tradeoff bias and variance. You don’t want either high bias or high variance in your model.

Q2- What is the difference between supervised and unsupervised machine learning?

More reading: What is the difference between supervised and unsupervised machine learning? (Quora)

Supervised learning requires training labeled data. For example, in order to do classification (a supervised learning task), you’ll need to first label the data you’ll use to train the model to classify data into your labeled groups. Unsupervised learning, in contrast, does not require labeling data explicitly.

Q3- How is KNN different from k-means clustering?

More reading: How is the k-nearest neighbor algorithm different from k-means clustering? (Quora)

K-Nearest Neighbors is a supervised classification algorithm, while k-means clustering is an unsupervised clustering algorithm. While the mechanisms may seem similar at first, what this really means is that in order for K-Nearest Neighbors to work, you need labeled data you want to classify an unlabeled point into (thus the nearest neighbor part). K-means clustering requires only a set of unlabeled points and a threshold: the algorithm will take unlabeled points and gradually learn how to cluster them into groups by computing the mean of the distance between different points.

The critical difference here is that KNN needs labeled points and is thus supervised learning, while k-means doesn’t — and is thus unsupervised learning.

Q5- Define precision and recall.

More reading: Precision and recall (Wikipedia)

Recall is also known as the true positive rate: the amount of positives your model claims compared to the actual number of positives there are throughout the data. Precision is also known as the positive predictive value, and it is a measure of the amount of accurate positives your model claims compared to the number of positives it actually claims. It can be easier to think of recall and precision in the context of a case where you’ve predicted that there were 10 apples and 5 oranges in a case of 10 apples. You’d have perfect recall (there are actually 10 apples, and you predicted there would be 10) but 66.7% precision because out of the 15 events you predicted, only 10 (the apples) are correct.

Q6- What is Bayes’ Theorem? How is it useful in a machine learning context?

More reading: An Intuitive (and Short) Explanation of Bayes’ Theorem (BetterExplained)

Bayes’ Theorem gives you the posterior probability of an event given what is known as prior knowledge.

Mathematically, it’s expressed as the true positive rate of a condition sample divided by the sum of the false positive rate of the population and the true positive rate of a condition. Say you had a 60% chance of actually having the flu after a flu test, but out of people who had the flu, the test will be false 50% of the time, and the overall population only has a 5% chance of having the flu. Would you actually have a 60% chance of having the flu after having a positive test?

Bayes’ Theorem says no. It says that you have a (.6 * 0.05) (True Positive Rate of a Condition Sample) / (.6*0.05)(True Positive Rate of a Condition Sample) + (.5*0.95) (False Positive Rate of a Population)  = 0.0594 or 5.94% chance of getting a flu.

Bayes’ Theorem is the basis behind a branch of machine learning that most notably includes the Naive Bayes classifier. That’s something important to consider when you’re faced with machine learning interview questions.

 

Q7- Why is “Naive” Bayes naive?

More reading: Why is “naive Bayes” naive? (Quora)

Despite its practical applications, especially in text mining, Naive Bayes is considered “Naive” because it makes an assumption that is virtually impossible to see in real-life data: the conditional probability is calculated as the pure product of the individual probabilities of components. This implies the absolute independence of features — a condition probably never met in real life.

As a Quora commenter put it whimsically, a Naive Bayes classifier that figured out that you liked pickles and ice cream would probably naively recommend you a pickle ice cream.

Q8- Explain the difference between L1 and L2 regularization.

More reading: What is the difference between L1 and L2 regularization? (Quora)

L2 regularization tends to spread error among all the terms, while L1 is more binary/sparse, with many variables either being assigned a 1 or 0 in weighting. L1 corresponds to setting a Laplacean prior on the terms, while L2 corresponds to a Gaussian prior.

Q9- What’s your favorite algorithm, and can you explain it to me in less than a minute?

This type of question tests your understanding of how to communicate complex and technical nuances with poise and the ability to summarize quickly and efficiently. Make sure you have a choice and make sure you can explain different algorithms so simply and effectively that a five-year-old could grasp the basics!

Q12- What’s the difference between probability and likelihood?

More reading: What is the difference between “likelihood” and “probability”? (Cross Validated)

Q13- What is deep learning, and how does it contrast with other machine learning algorithms?

More reading: Deep learning (Wikipedia)

Deep learning is a subset of machine learning that is concerned with neural networks: how to use backpropagation and certain principles from neuroscience to more accurately model large sets of unlabelled or semi-structured data. In that sense, deep learning represents an unsupervised learning algorithm that learns representations of data through the use of neural nets.

Q14- What’s the difference between a generative and discriminative model?

More reading: What is the difference between a Generative and Discriminative Algorithm? (Stack Overflow)

A generative model will learn categories of data while a discriminative model will simply learn the distinction between different categories of data. Discriminative models will generally outperform generative models on classification tasks.

Q15- What cross-validation technique would you use on a time series dataset?

More reading: Using k-fold cross-validation for time-series model selection (CrossValidated)

Instead of using standard k-folds cross-validation, you have to pay attention to the fact that a time series is not randomly distributed data — it is inherently ordered by chronological order. If a pattern emerges in later time periods for example, your model may still pick up on it even if that effect doesn’t hold in earlier years!

You’ll want to do something like forward chaining where you’ll be able to model on past data then look at forward-facing data.

• fold 1 : training [1], test [2]
• fold 2 : training [1 2], test [3]
• fold 3 : training [1 2 3], test [4]
• fold 4 : training [1 2 3 4], test [5]
• fold 5 : training [1 2 3 4 5], test [6]

Q16- How is a decision tree pruned?

More reading: Pruning (decision trees)

Pruning is what happens in decision trees when branches that have weak predictive power are removed in order to reduce the complexity of the model and increase the predictive accuracy of a decision tree model. Pruning can happen bottom-up and top-down, with approaches such as reduced error pruning and cost complexity pruning.

Reduced error pruning is perhaps the simplest version: replace each node. If it doesn’t decrease predictive accuracy, keep it pruned. While simple, this heuristic actually comes pretty close to an approach that would optimize for maximum accuracy.

Q17- Which is more important to you– model accuracy, or model performance?

More reading: Accuracy paradox (Wikipedia)

This question tests your grasp of the nuances of machine learning model performance! Machine learning interview questions often look towards the details. There are models with higher accuracy that can perform worse in predictive power — how does that make sense?

Well, it has everything to do with how model accuracy is only a subset of model performance, and at that, a sometimes misleading one. For example, if you wanted to detect fraud in a massive dataset with a sample of millions, a more accurate model would most likely predict no fraud at all if only a vast minority of cases were fraud. However, this would be useless for a predictive model — a model designed to find fraud that asserted there was no fraud at all! Questions like this help you demonstrate that you understand model accuracy isn’t the be-all and end-all of model performance.

Q18- What’s the F1 score? How would you use it?

More reading: F1 score (Wikipedia)

The F1 score is a measure of a model’s performance. It is a weighted average of the precision and recall of a model, with results tending to 1 being the best, and those tending to 0 being the worst. You would use it in classification tests where true negatives don’t matter much.

Q19- How would you handle an imbalanced dataset?

More reading: 8 Tactics to Combat Imbalanced Classes in Your Machine Learning Dataset (Machine Learning Mastery)

An imbalanced dataset is when you have, for example, a classification test and 90% of the data is in one class. That leads to problems: an accuracy of 90% can be skewed if you have no predictive power on the other category of data! Here are a few tactics to get over the hump:

1- Collect more data to even the imbalances in the dataset.

2- Resample the dataset to correct for imbalances.

3- Try a different algorithm altogether on your dataset.

What’s important here is that you have a keen sense for what damage an unbalanced dataset can cause, and how to balance that.

Q20- When should you use classification over regression?

More reading: Regression vs Classification (Math StackExchange)

Classification produces discrete values and dataset to strict categories, while regression gives you continuous results that allow you to better distinguish differences between individual points. You would use classification over regression if you wanted your results to reflect the belongingness of data points in your dataset to certain explicit categories (ex: If you wanted to know whether a name was male or female rather than just how correlated they were with male and female names.)

Q22- How do you ensure you’re not overfitting with a model?

More reading: How can I avoid overfitting? (Quora)

This is a simple restatement of a fundamental problem in machine learning: the possibility of overfitting training data and carrying the noise of that data through to the test set, thereby providing inaccurate generalizations.

There are three main methods to avoid overfitting:

1- Keep the model simpler: reduce variance by taking into account fewer variables and parameters, thereby removing some of the noise in the training data.

2- Use cross-validation techniques such as k-folds cross-validation.

3- Use regularization techniques such as LASSO that penalize certain model parameters if they’re likely to cause overfitting.

Q23- What evaluation approaches would you work to gauge the effectiveness of a machine learning model?

More reading: How to Evaluate Machine Learning Algorithms (Machine Learning Mastery)

You would first split the dataset into training and test sets, or perhaps use cross-validation techniques to further segment the dataset into composite sets of training and test sets within the data. You should then implement a choice selection of performance metrics: here is a fairly comprehensive list. You could use measures such as the F1 score, the accuracy, and the confusion matrix. What’s important here is to demonstrate that you understand the nuances of how a model is measured and how to choose the right performance measures for the right situations.

Q24- How would you evaluate a logistic regression model?

More reading: Evaluating a logistic regression (CrossValidated)

A subsection of the question above. You have to demonstrate an understanding of what the typical goals of a logistic regression are (classification, prediction etc.) and bring up a few examples and use cases.

Q25- What’s the “kernel trick” and how is it useful?

More reading: Kernel method (Wikipedia)

The Kernel trick involves kernel functions that can enable in higher-dimension spaces without explicitly calculating the coordinates of points within that dimension: instead, kernel functions compute the inner products between the images of all pairs of data in a feature space. This allows them the very useful attribute of calculating the coordinates of higher dimensions while being computationally cheaper than the explicit calculation of said coordinates. Many algorithms can be expressed in terms of inner products. Using the kernel trick enables us effectively run  algorithms in a high-dimensional space with lower-dimensional data.

Machine Learning Interview Questions: Programming

These machine learning interview questions test your knowledge of programming principles you need to implement machine learning principles in practice. Machine learning interview questions tend to be technical questions that test your logic and programming skills: this section focuses more on the latter.

Q26- How do you handle missing or corrupted data in a dataset?

More reading: Handling missing data (O’Reilly)

Q28- Pick an algorithm. Write the psuedo-code for a parallel implementation.

More reading: Writing pseudocode for parallel programming (Stack Overflow)

This kind of question demonstrates your ability to think in parallelism and how you could handle concurrency in programming implementations dealing with big data. Take a look at pseudocode frameworks such as Peril-L and visualization tools such as Web Sequence Diagrams to help you demonstrate your ability to write code that reflects parallelism.

Q29- What are some differences between a linked list and an array?

More reading: Array versus linked list (Stack Overflow)

An array is an ordered collection of objects. A linked list is a series of objects with pointers that direct how to process them sequentially. An array assumes that every element has the same size, unlike the linked list. A linked list can more easily grow organically: an array has to be pre-defined or re-defined for organic growth. Shuffling a linked list involves changing which points direct where — meanwhile, shuffling an array is more complex and takes more memory.

Q30- Describe a hash table.

More reading: Hash table (Wikipedia)

A hash table is a data structure that produces an associative array. A key is mapped to certain values through the use of a hash function. They are often used for tasks such as database indexing.

Q31- Which data visualization libraries do you use? What are your thoughts on the best data visualization tools?

More reading: 31 Free Data Visualization Tools (Springboard)

What’s important here is to define your views on how to properly visualize data and your personal preferences when it comes to tools. Popular tools include R’s ggplot, Python’s seaborn and matplotlib, and tools such as Plot.ly and Tableau.

Q28- Pick an algorithm. Write the psuedo-code for a parallel implementation.

More reading: Writing pseudocode for parallel programming (Stack Overflow)

This kind of question demonstrates your ability to think in parallelism and how you could handle concurrency in programming implementations dealing with big data. Take a look at pseudocode frameworks such as Peril-L and visualization tools such as Web Sequence Diagrams to help you demonstrate your ability to write code that reflects parallelism.

Q29- What are some differences between a linked list and an array?

More reading: Array versus linked list (Stack Overflow)

An array is an ordered collection of objects. A linked list is a series of objects with pointers that direct how to process them sequentially. An array assumes that every element has the same size, unlike the linked list. A linked list can more easily grow organically: an array has to be pre-defined or re-defined for organic growth. Shuffling a linked list involves changing which points direct where — meanwhile, shuffling an array is more complex and takes more memory.

Q30- Describe a hash table.

More reading: Hash table (Wikipedia)

A hash table is a data structure that produces an associative array. A key is mapped to certain values through the use of a hash function. They are often used for tasks such as database indexing.

Q31- Which data visualization libraries do you use? What are your thoughts on the best data visualization tools?

More reading: 31 Free Data Visualization Tools (Springboard)

What’s important here is to define your views on how to properly visualize data and your personal preferences when it comes to tools. Popular tools include R’s ggplot, Python’s seaborn and matplotlib, and tools such as Plot.ly and Tableau.

 

You could find missing/corrupted data in a dataset and either drop those rows or columns, or decide to replace them with another value.

In Pandas, there are two very useful methods: isnull() and dropna() that will help you find columns of data with missing or corrupted data and drop those values. If you want to fill the invalid values with a placeholder value (for example, 0), you could use the fillna() method.