HK-2000 数采仪系统说明之 1.系统启动日志
**************************************************
** Welcome to Enviromental Control Technology **
** http://www.bject.com.cn **
** Tel:86-10-51280105 **
**************************************************
U-Boot 1.0.0 (Oct 29 2007 - 10:57:04)
U-Boot code: 21F00000 -> 21F197CC BSS: -> 21F1D15C
DRAM Configuration:
Bank #0: 20000000 32 MB
Fujitsu: 29LV320BE(32Mbit)
Flash: 4 MB
NAND:Flash chip found:
Manufacturer ID: 0xEC, Chip ID: 0x76 (Samsung K9F1208UOA)
1 flash chips found. Total nand_chip size: 64 MB
64 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
## Booting image at 21000000 ...
Image Name: uImage
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 753704 Bytes = 736 kB
Load Address: 20008000
Entry Point: 20008000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
Linux version 2.4.27-vrs1 (root@bject) (gcc version 2.95.3 20010315 (release)) #187 三 11月 7 09:47:55 CST 2007
CPU: Arm920Tid(wb) revision 0
Machine: ATMEL AT91RM9200
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock/3 console=ttyS0,115200 mem=32M
Calibrating delay loop... 89.70 BogoMIPS
Memory: 32MB = 32MB total
Memory: 30584KB available (1472K code, 270K data, 52K init)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: Testing write buffer: pass
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
Starting USB Keyboard Driver... Done
pty: 256 Unix98 ptys configured
RAMDISK driver initialized: 16 RAM disks of 15360K size 1024 blocksize
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
physmap flash device: 400000 at 10000000
Amd/Fujitsu Extended Query Table v1.0 at 0x0041
Physically mapped flash: JEDEC Device ID is 0xC8. Assuming broken CFI table.
Physically mapped flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Creating 3 MTD partitions on "Physically mapped flash":
0x00000000-0x00020000 : " bootloader "
0x00020000-0x00100000 : " uImage "
0x00100000-0x00400000 : " jffs2disk "
Coming to nand_init!
SmartMedia card inserted.
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
Creating 1 MTD partitions on "Samsung K9D1208V0M":
0x00000000-0x04000000 : "User Partition 1 (AT91 NAND)"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ttyS%d0 at MMIO 0xfefff200 (irq = 1) is a AT91_SERIAL
ttyS%d1 at MMIO 0xfefc0000 (irq = 6) is a AT91_SERIAL
ttyS%d2 at MMIO 0xfefc4000 (irq = 7) is a AT91_SERIAL
ttyS%d3 at MMIO 0xfefc8000 (irq = 8) is a AT91_SERIAL
ttyS%d4 at MMIO 0xfefcc000 (irq = 9) is a AT91_SERIAL
eth0: AT91 ethernet at 0xfefbc000 int=24 10-HalfDuplex (00:00:00:00:00:00)
eth0: Davicom 9196 PHY (Copper)
host/usb-ohci.c: USB OHCI at membase 0xc3478000, IRQ 23
usb.c: new USB bus registered, assigned bus number 1
Product: USB OHCI Root Hub
SerialNumber: c3478000
hub.c: USB hub found
hub.c: 2 ports detected
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing init memory: 52K
mke2fs 1.35 (28-Feb-2004)
ext2fs_check_if_mount: No such file or directory while determining whether /dev/ram0 is mounted.
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
1024 inodes, 4096 blocks
0 blocks (0.00%) reserved for the super user
First data block=1
1 block group
8192 blocks per group, 8192 fragments per group
1024 inodes per group
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 34 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
eth0: Setting MAC address to 00:20:08:06:01:03
yaffs: Attempting MTD mount on 31.4, "1f:04"
开始执行系统配置脚本... ...
注册系统驱动... ...
ttyS%d5 at MMIO 0x80000040 (irq = 1) is a TL16C554_SERIAL
ttyS%d6 at MMIO 0x80000060 (irq = 2) is a TL16C554_SERIAL
ttyS%d7 at MMIO 0x80000080 (irq = 4) is a TL16C554_SERIAL
ttyS%d8 at MMIO 0x800000a0 (irq = 8) is a TL16C554_SERIAL
AT91 Watchdog Timer enabled (5 seconds)
AT91RM9200 audio driver version 0.1, build time:09:27:45
0x12 init value=402
0x12 is set to=1562
设置操作系统时间... ...
Set OS Time By RTC Time:2008-08-04 08:29:33
Set system datatime successfully!
启动数据采集仪应用程序... ...
启动软件狗服务... ...
执行启动脚本结束!
BusyBox v1.00 (2005.08.03-02:49+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
-sh: stty: not found
[root@(none) /]$
** Welcome to Enviromental Control Technology **
** http://www.bject.com.cn **
** Tel:86-10-51280105 **
**************************************************
U-Boot 1.0.0 (Oct 29 2007 - 10:57:04)
U-Boot code: 21F00000 -> 21F197CC BSS: -> 21F1D15C
DRAM Configuration:
Bank #0: 20000000 32 MB
Fujitsu: 29LV320BE(32Mbit)
Flash: 4 MB
NAND:Flash chip found:
Manufacturer ID: 0xEC, Chip ID: 0x76 (Samsung K9F1208UOA)
1 flash chips found. Total nand_chip size: 64 MB
64 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
## Booting image at 21000000 ...
Image Name: uImage
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 753704 Bytes = 736 kB
Load Address: 20008000
Entry Point: 20008000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
Linux version 2.4.27-vrs1 (root@bject) (gcc version 2.95.3 20010315 (release)) #187 三 11月 7 09:47:55 CST 2007
CPU: Arm920Tid(wb) revision 0
Machine: ATMEL AT91RM9200
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock/3 console=ttyS0,115200 mem=32M
Calibrating delay loop... 89.70 BogoMIPS
Memory: 32MB = 32MB total
Memory: 30584KB available (1472K code, 270K data, 52K init)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: Testing write buffer: pass
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
Starting USB Keyboard Driver... Done
pty: 256 Unix98 ptys configured
RAMDISK driver initialized: 16 RAM disks of 15360K size 1024 blocksize
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
physmap flash device: 400000 at 10000000
Amd/Fujitsu Extended Query Table v1.0 at 0x0041
Physically mapped flash: JEDEC Device ID is 0xC8. Assuming broken CFI table.
Physically mapped flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Creating 3 MTD partitions on "Physically mapped flash":
0x00000000-0x00020000 : " bootloader "
0x00020000-0x00100000 : " uImage "
0x00100000-0x00400000 : " jffs2disk "
Coming to nand_init!
SmartMedia card inserted.
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
Creating 1 MTD partitions on "Samsung K9D1208V0M":
0x00000000-0x04000000 : "User Partition 1 (AT91 NAND)"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ttyS%d0 at MMIO 0xfefff200 (irq = 1) is a AT91_SERIAL
ttyS%d1 at MMIO 0xfefc0000 (irq = 6) is a AT91_SERIAL
ttyS%d2 at MMIO 0xfefc4000 (irq = 7) is a AT91_SERIAL
ttyS%d3 at MMIO 0xfefc8000 (irq = 8) is a AT91_SERIAL
ttyS%d4 at MMIO 0xfefcc000 (irq = 9) is a AT91_SERIAL
eth0: AT91 ethernet at 0xfefbc000 int=24 10-HalfDuplex (00:00:00:00:00:00)
eth0: Davicom 9196 PHY (Copper)
host/usb-ohci.c: USB OHCI at membase 0xc3478000, IRQ 23
usb.c: new USB bus registered, assigned bus number 1
Product: USB OHCI Root Hub
SerialNumber: c3478000
hub.c: USB hub found
hub.c: 2 ports detected
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing init memory: 52K
mke2fs 1.35 (28-Feb-2004)
ext2fs_check_if_mount: No such file or directory while determining whether /dev/ram0 is mounted.
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
1024 inodes, 4096 blocks
0 blocks (0.00%) reserved for the super user
First data block=1
1 block group
8192 blocks per group, 8192 fragments per group
1024 inodes per group
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 34 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
eth0: Setting MAC address to 00:20:08:06:01:03
yaffs: Attempting MTD mount on 31.4, "1f:04"
开始执行系统配置脚本... ...
注册系统驱动... ...
ttyS%d5 at MMIO 0x80000040 (irq = 1) is a TL16C554_SERIAL
ttyS%d6 at MMIO 0x80000060 (irq = 2) is a TL16C554_SERIAL
ttyS%d7 at MMIO 0x80000080 (irq = 4) is a TL16C554_SERIAL
ttyS%d8 at MMIO 0x800000a0 (irq = 8) is a TL16C554_SERIAL
AT91 Watchdog Timer enabled (5 seconds)
AT91RM9200 audio driver version 0.1, build time:09:27:45
0x12 init value=402
0x12 is set to=1562
设置操作系统时间... ...
Set OS Time By RTC Time:2008-08-04 08:29:33
Set system datatime successfully!
启动数据采集仪应用程序... ...
启动软件狗服务... ...
执行启动脚本结束!
BusyBox v1.00 (2005.08.03-02:49+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
-sh: stty: not found
[root@(none) /]$
