Nagios事件机制实践
Nagios事件机制实践
blog地址:http://www.cnblogs.com/caoguo
一.事件触发执行脚本
[root@Nagios ~]# cd /usr/local/nagios/libexec/eventhandlers/ [root@Nagios eventhandlers]# touch process_snapshot.sh [root@Nagios eventhandlers]# vi process_snapshot.sh #!/bin/bash case "$1" in OK) ;; WARNING) /usr/local/nagios/libexec/check_nrpe -H $4 -c process_snapshot ;; UNKNOWN) ;; CRITICAL) /usr/local/nagios/libexec/check_nrpe -H $4 -c process_snapshot ;; esac exit 0 [root@Nagios eventhandlers]# chmod +x process_snapshot.sh [root@Nagios eventhandlers]# chown -R nagios.nagios /usr/local/nagios/libexec/eventhandlers/
[root@Nagios ~]# vi /etc/nagios/objects/commands.cfg define command{ command_name process_snapshot command_line $USER1$/eventhandlers/process_snapshot.sh $SERVICESTATE$ $SERVICESTATETYPE$ $SERVICEATTEMPT$ $HOSTADDRESS$ }
二.配置nagios主机文件
# 开启触发脚本 [root@Nagios ~]# vi /etc/nagios/objects/nrpehost.cfg define service{ use generic-service host_name nrpehost service_description CHECK LOAD check_command check_nrpe!check_load notifications_enabled 1 event_handler process_snapshot }
# 开启事件触发功能 [root@Nagios ~]# grep "enable_event_handlers" /etc/nagios/nagios.cfg enable_event_handlers=1
三.配置nrpe节点
# nrpe节点定义执行命令 [root@Nrpe ~]# vi /etc/nrpe/nrpe.cfg command[process_snapshot]=top -cSb n 1 | tail -n +8 | sort -rn -k9 | head -n20 > /tmp/proc_snap.log # 允许命令中带有参数 dont_blame_nrpe=1
四.测试远程执行
# 查看文件是否能创建
五.实验测试调整
[root@Nrpe ~]# grep 'load' /etc/nrpe/nrpe.cfg command[check_load]=/usr/local/nrpe/libexec/check_load -w 0.7,0.6,0.5 -c 1,3,5 # 修改检查间隔为1分钟,这样可以来观测事件执行动作 [root@Nagios ~]# vi /etc/nagios/objects/templates.cfg normal_check_interval 1
六.结果
[root@Nrpe ~]# dd bs=1G count=4k if=/dev/zero of=test
参考:http://www.ttlsa.com/nagios/nagios-event-handlers-application/