--采购到入库所经历的表
--0.请购单
--创建请购单方式有
--a.从外挂系统导入请购的接口表PO_REQUISITIONS_INTERFACE_ALL,并允许请求(名称:导入申请)
SELECT * FROM PO_REQUISITIONS_INTERFACE_ALL WHERE INTERFACE_SOURCE_CODE = 'TEST KHJ'
--b.在系统中创建请购单(路径:PO/申请/申请)
--请购单头信息
SELECT prh.requisition_header_id ,prh.authorization_status--未审批时为INCOMPLETE,审批完后为 from PO_REQUISITION_HEADERS_ALL PRH where prh.segment1= '600000' and prh.type_lookup_code='PURCHASE'
--请购单行信息
SELECT prL.Requisition_Line_Id ,prL.* from PO_REQUISITION_LINES_ALL PRL where PRL.REQUISITION_HEADER_ID IN( SELECT prh.requisition_header_id from PO_REQUISITION_HEADERS_ALL PRH where prh.segment1= '600000' and prh.type_lookup_code='PURCHASE')
--请购单分配行
select * from Po_Req_Distributions_All prda where prda.requisition_line_id in (SELECT prL.Requisition_Line_Id from PO_REQUISITION_LINES_ALL PRL where PRL.REQUISITION_HEADER_ID IN (SELECT prh.requisition_header_id from PO_REQUISITION_HEADERS_ALL PRH where prh.segment1 = '600000' and prh.type_lookup_code = 'PURCHASE'))
--1.采购订单的创建(路径:PO/采购订单/采购订单)
--po_headers_all 采购订单头表 select pha.po_header_id, pha.segment1, pha.agent_id, pha.type_lookup_code,--标准采购单为STANDARD,一揽子协议为BLANKET decode(pha.approved_flag,'R', pha.approved_flag, nvl(pha.authorization_status,'INCOMPLETE')),--审批,未审批时为INCOMPLETE,审批后为APPROVED PO_HEADERS_SV3.GET_PO_STATUS(pha.po_header_id)--刚下完采购单,未审批时,po状态为未完成,审批后,状态为批准 from po_headers_all pha where segment1 = 300446--采购单号码 --po_lines_all 采购订单行表 select pla.po_line_id, pla.line_type_id from po_lines_all pla where po_header_id = (select po_header_id from po_headers_all where segment1 = 300446); /*
取已审批销售订单头和行的数据:
涉及表: Po_headers_all,Po_lines_all
逻辑如下:
限制头表的如下属性,并通过Po_header_id把头、行表关联起来
APPROVED_FLAG=Y
*/
--po_line_locations_all 采购订单行的发送表(路径:PO/采购订单/采购订单/发运(T))
--po_line_id=po_lines_all.po_line_id
--当点击发运按钮时,系统会自动创建第一行发运行,可根据需要手工创建新的发运行
--(例如同一采购订单行的物料可能会发往不同的地点,此表记录物料发送情况)
--下面为取订单与其发运的关系(可能存在多次发运)
select * from po_line_locations_all plla where plla.po_line_id =(select pla.po_line_id from po_lines_all pla where po_header_id = (select po_header_id from po_headers_all where segment1 = 300446)); --或者 select * from po_line_locations_all plla where plla.po_header_id=(select po_header_id from po_headers_all where segment1 = 300446);
--4、po_distributions_all 采购订单发送行的分配表(路径:PO/采购订单/采购订单/发运(T)/分配(T))
--line_location_id=po_line_location_all.line_location_id
--发往同一地点的物料也可能放在不同的子库存,此表记录物料分配情况
SELECT * FROM po_distributions_all pda WHERE pda.line_location_id in( select plla.Line_Location_Id from po_line_locations_all plla where plla.po_line_id =(select pla.po_line_id from po_lines_all pla where po_header_id = (select po_header_id from po_headers_all where segment1 = 300446))) --或者 select * from po_distributions_all where po_header_id = (select po_header_id from po_headers_all where segment1 = 300446) --或者 select * from po_distributions_all pda where pda.po_line_id= (select pla.po_line_id from po_lines_all pla where po_header_id = (select po_header_id from po_headers_all where segment1 = 300446))
--对于po_distribution_all 表而言,如果其SOURCE_DISTRIBUTION_ID 有值, 其对应于计划采购单发放
/*以上各表从上到下是一对多关系的 */
--po_releases_all 订单发放
--该表包含一揽子协议以及计划采购单的release,对于每一张发放的一揽子协议或者计划采购单都有相关行与之对应
--其包含采购员,日期,释放状态,释放号码,每一个释放行都有至少一条的采购单的发运信息与之对应(PO_LINE_LOCATIONS_ALL).
--每做一次Realese,PO_distributions_all就会新增一条记录。这是计划订单的特性。
--
SELECT * FROM po_releases_all WHERE po_header_id =<po_header_id>;;
--接收(路径:INV/事务处理/接收/接收)
--1.rcv_shipment_headers 接收发送头表
--记录采购订单的接收情况的头表
select * from rcv_shipment_headers rsh where rsh.shipment_header_id in (select shipment_header_id from rcv_shipment_lines where po_header_id = 4105);
--2.rcv_shipment_lines 接收发送行表
--记录采购订单的发送的行的接收情况
select * from rcv_shipment_lines where po_header_id = 4105
--3.rcv_transactions 接收事务处理表
--记录采购订单的发送行的RECEIVE的信息
select RT.TRANSACTION_ID, rt.transaction_type, rt.destination_type_code, rt.* from rcv_transactions rt where rt.interface_source_code = 'RCV' and rt.source_document_code = 'PO' and ( rt.po_header_id = (select pha.po_header_id from po_headers_all pha where segment1 = 300446 ) or RT.PO_LINE_ID IN(select pla.po_line_id from po_lines_all pla where po_header_id = (select po_header_id from po_headers_all where segment1 = 300446)) or RT.SHIPMENT_HEADER_ID = (select RSH.SHIPMENT_HEADER_ID from rcv_shipment_headers rsh where shipment_header_id in (select shipment_header_id from rcv_shipment_lines where po_header_id = 4105)) or rt.shipment_line_id in(select shipment_line_id from rcv_shipment_lines where po_header_id = 4105) )
--4.rcv_receiving_sub_ledger 暂记应付表
--记录采购订单接收后,产生的暂记应付信息(接收事务处理产生的分配行)
select * from rcv_receiving_sub_ledger where rcv_transaction_id in (select transaction_id from rcv_transactions where po_header_id = 4105);
--接受(路径:INV/事务处理/接收/接收事务处理)
--接收事务处理:接收之后,其实现在还并没有入库。
--rcv_transactions 接收事务处理表
--记录采购订单的发送行的ACCEPT的信息
select RT.TRANSACTION_ID,rt.transaction_type,rt.destination_type_code,rt.* from rcv_transactions rt where rt.interface_source_code = 'RCV' --做接收的条件 and rt.source_document_code = 'PO' --做接收的条件 and rt.TRANSACTION_TYPE = 'RECEIVE'--做接收的条件 and rt.DESTINATION_TYPE_CODE = 'RECEIVE'--做接收的条件 and ( rt.po_header_id = (select pha.po_header_id from po_headers_all pha where segment1 = 300446 ) or RT.PO_LINE_ID IN(select pla.po_line_id from po_lines_all pla where po_header_id = (select po_header_id from po_headers_all where segment1 = 300446)) or RT.SHIPMENT_HEADER_ID = (select RSH.SHIPMENT_HEADER_ID from rcv_shipment_headers rsh where shipment_header_id in (select shipment_header_id from rcv_shipment_lines where po_header_id = 4105)) or rt.shipment_line_id in(select shipment_line_id from rcv_shipment_lines where po_header_id = 4105) )
-- 入库
--因为涉及入库操作,所以,在库存事务处理表中会留下相应的记录。
--即在Mtl_material_transactions表中,会存在相应的两条入库记录。
SELECT mmt.* FROM mtl_material_transactions mmt where mmt.transaction_type_id =18 --po接收 and mmt.transaction_action_id =27 --接收至库存 and mmt.transaction_source_type_id=1 --采购订单 and ( mmt.transaction_source_id= 4105 --po_header_id or mmt.rcv_transaction_id in (select RT.TRANSACTION_ID from rcv_transactions rt where rt.interface_source_code = 'RCV' and rt.source_document_code = 'PO' and (rt.po_header_id = (select pha.po_header_id from po_headers_all pha where segment1 = 300446)))) --此时,rcv_transactions的状态变为 select RT.TRANSACTION_ID,rt.transaction_type,rt.destination_type_code,rt.* from rcv_transactions rt where rt.interface_source_code = 'RCV' --做入库的条件 and rt.source_document_code = 'PO' --做入库的条件 and rt.TRANSACTION_TYPE = 'DELIVER'--做入库的条件 and rt.DESTINATION_TYPE_CODE = 'INVENTORY'--做入库的条件 and ( rt.po_header_id = (select pha.po_header_id from po_headers_all pha where segment1 = 300446 ) or RT.PO_LINE_ID IN(select pla.po_line_id from po_lines_all pla where po_header_id = (select po_header_id from po_headers_all where segment1 = 300446)) or RT.SHIPMENT_HEADER_ID = (select RSH.SHIPMENT_HEADER_ID from rcv_shipment_headers rsh where shipment_header_id in (select shipment_header_id from rcv_shipment_lines where po_header_id = 4105)) or rt.shipment_line_id in(select shipment_line_id from rcv_shipment_lines where po_header_id = 4105) )
--退货
--说明:
--退货至接收时,产生一条记录,退货至供应商时,产生两条数据。 可见退货的实际顺序为: 库存----> 接收----> 供应商
--不管是退货至接收还是退货至供应商,在事务处理中,都会产生两条记录。
--而且,数量符号与接收的数据正好相反。而且产生的记录都是RETURN TO RECEIVING。
--1.库存退货至接受
SELECT rt.DESTINATION_TYPE_CODE,rt.INTERFACE_SOURCE_CODE,rt.* FROM rcv_transactions rt WHERE rt.interface_source_code IS NULL and rt.transaction_type ='RETURN TO RECEIVING'--退货至接受 and rt.source_document_code='PO' AND RT.DESTINATION_TYPE_CODE='RECEIVING' AND po_header_id = 4105 AND po_line_id = 9938 SELECT MMT.* FROM mtl_material_transactions MMT WHERE MMT.TRANSACTION_SOURCE_ID=4105 AND MMT.TRANSACTION_TYPE_ID =36 AND MMT.TRANSACTION_ACTION_ID=1 AND MMT.TRANSACTION_SOURCE_TYPE_ID=1
--2.库存退货至供应商(产生两条数据。顺序为: 库存----> 接收----> 供应商)
--a.库存退货至接收
SELECT rt.DESTINATION_TYPE_CODE,rt.INTERFACE_SOURCE_CODE,rt.* FROM rcv_transactions rt WHERE rt.interface_source_code IS NULL and rt.transaction_type ='RETURN TO RECEIVING'--先退货至接收 and rt.source_document_code='PO' AND RT.DESTINATION_TYPE_CODE='INVENTORY' AND po_header_id = 4105
--b.接收退货至供应商
SELECT rt.DESTINATION_TYPE_CODE,rt.INTERFACE_SOURCE_CODE,rt.* FROM rcv_transactions rt WHERE rt.interface_source_code IS NULL and rt.transaction_type ='RETURN TO VENDOR'--退货至供应商 and rt.source_document_code='PO' AND RT.DESTINATION_TYPE_CODE='RECEIVING' AND po_header_id = 4105
SELECT MMT.* FROM mtl_material_transactions MMT WHERE MMT.TRANSACTION_SOURCE_ID=4105 AND MMT.TRANSACTION_TYPE_ID =36--向供应商退货 AND MMT.TRANSACTION_ACTION_ID=1--从库存发放 AND MMT.TRANSACTION_SOURCE_TYPE_ID=1--采购订单