Linux vmstat 使用说明
摘自 https://www.thomas-krenn.com/en/wiki/Linux_Performance_Measurements_using_vmstat
-
Linux Performance Measurements using vmstat
vmstat (virtual memory statistics) is a valuable monitoring utility, which also provides information about block IO and CPU activity in addition to memory.
Contents
vmstat Basics
vmstat provides a number of values and will typically be called using two numerical parameters.
- Example:
vmstat 1 5
- 1 -> the values will be re-measured and reported every second
- 5 -> the values will be reported five times and then the program will stop
The first line of the report will contain the average values since the last time the computer was rebooted. All other lines in the report will represent their respective current values. Vmstat does not need any special user rights. It can run as a normal user.
[user@fedora9 ~]$ vmstat 1 5 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 3 0 0 44712 110052 623096 0 0 30 28 217 888 13 3 83 1 0 0 0 0 44408 110052 623096 0 0 0 0 88 1446 31 4 65 0 0 0 0 0 44524 110052 623096 0 0 0 0 84 872 11 2 87 0 0 0 0 0 44516 110052 623096 0 0 0 0 149 1429 18 5 77 0 0 0 0 0 44524 110052 623096 0 0 0 0 60 431 14 1 85 0 0 [user@fedora9 ~]$
Meaning of the individual Values
(Source
man vmstat
):- Procs
- r: The number of processes waiting for run time.
- b: The number of processes in uninterruptible sleep.
- Memory
- swpd: the amount of virtual memory used.
- free: the amount of idle memory.
- buff: the amount of memory used as buffers.
- cache: the amount of memory used as cache.
- inact: the amount of inactive memory. (-a option)
- active: the amount of active memory. (-a option)
- Swap
- si: Amount of memory swapped in from disk (/s).
- so: Amount of memory swapped to disk (/s).
- IO
- bi: Blocks received from a block device (blocks/s).
- bo: Blocks sent to a block device (blocks/s).
- System
- in: The number of interrupts per second, including the clock.
- cs: The number of context switches per second.
- CPU
- These are percentages of total CPU time.
- us: Time spent running non-kernel code. (user time, including nice time)
- sy: Time spent running kernel code. (system time)
- id: Time spent idle. Prior to Linux 2.5.41, this includes IO-wait time.
- wa: Time spent waiting for IO. Prior to Linux 2.5.41, included in idle.
- st: Time stolen from a virtual machine. Prior to Linux 2.6.11, unknown.
Examples
CPU User Load Example
A standard audio file will be encode as an MP3 file by means of the lame encoder[1] in this example. This process is quite CPU intensive and also demonstrates the execution of
vmstat
in parallel with a user CPU time of 97%:[user@fedora8 ~]$ vmstat 1 5 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 6 1 0 302380 16356 271852 0 0 561 568 80 590 43 7 43 7 0 1 0 0 300892 16364 273256 0 0 0 52 79 274 97 3 0 0 0 2 0 0 299544 16364 274532 0 0 0 0 78 372 97 3 0 0 0 1 0 0 298292 16368 275780 0 0 0 0 53 255 97 3 0 0 0 1 0 0 296820 16368 277192 0 0 0 0 77 377 97 3 0 0 0 [user@fedora8 ~]$
CPU System Load Example
In this example, a file will be filled with random content using
dd
.[user@fedora9 ~]$ dd if=/dev/urandom of=500MBfile bs=1M count=500
For this,
/dev/urandom
[2] will supply random numbers, which will be generated by the kernel. This will lead to an increased load on the CPU (sy – system time). At the same time, thevmstat
executing in parallel will indicate that between 93% and 97% of the CPU time is being used for the execution of kernel code (for the generation of random numbers, in this case).[user@fedora9 ~]$ vmstat 1 5 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 402944 54000 161912 745324 5 14 54 59 221 867 13 3 82 2 0 1 0 402944 53232 161916 748396 0 0 0 0 30 213 3 97 0 0 0 1 0 402944 49752 161920 751452 0 0 0 0 28 290 4 96 0 0 0 1 0 402944 45804 161924 755564 0 0 0 0 29 188 2 98 0 0 0 1 0 402944 42568 161936 758608 0 0 0 17456 272 509 7 93 0 0 0 [user@fedora9 ~]$
The time for executing system calls[3][4][5] will be counted as system time (sy).
RAM Bottleneck (swapping) Example
In this example, many applications will be opened (including VirtualBox with a Windows guest system, among others). Almost all of the working memory will be used. Then, one more application (OpenOffice) will be started. The Linux kernel will then swap out several memory pages to the swap file on the hard disk, in order to get more RAM for OpenOffice. Swapping the memory pages to the swap file will be seen in the so (swap out - memory swapped to disk) column as
vmstat
executes in parallel.[user@fedora8 ~]$ vmstat 1 5 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 3 1 244208 10312 1552 62636 4 23 98 249 44 304 28 3 68 1 0 0 2 244920 6852 1844 67284 0 544 5248 544 236 1655 4 6 0 90 0 1 2 256556 7468 1892 69356 0 3404 6048 3448 290 2604 5 12 0 83 0 0 2 263832 8416 1952 71028 0 3788 2792 3788 140 2926 12 14 0 74 0 0 3 274492 7704 1964 73064 0 4444 2812 5840 295 4201 8 22 0 69 0 [user@fedora8 ~]$
High IO Read Load Example
A large file (such as an ISO file) will be read and written to /dev/null using
dd
.[user@fedora9 ~]$ dd if=bigfile.iso of=/dev/null bs=1M
Executed in parallel,
vmstat
will show the increased IO read load (the bi value).[user@fedora9 ~]$ vmstat 1 5 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 3 1 465872 36132 82588 1018364 7 17 70 127 214 838 12 3 82 3 0 0 1 465872 33796 82620 1021820 0 0 34592 0 357 781 6 10 0 84 0 0 1 465872 36100 82656 1019660 0 0 34340 0 358 723 5 9 0 86 0 0 1 465872 35744 82688 1020416 0 0 33312 0 345 892 8 11 0 81 0 0 1 465872 35716 82572 1020948 0 0 34592 0 358 738 7 8 0 85 0 [user@fedora9 ~]$
High IO Write Load Example
In contrast with the previous example,
dd
will read from /dev/zero and write a file. The oflag=dsync will cause the data to be written immediately to the disk (and not merely stored in the page cache).[user@fedora9 ~]$ dd if=/dev/zero of=500MBfile bs=1M count=500 oflag=dsync
Executed in parallel,
vmstat
will show the increased IO write load (the bo value).[user@fedora9 ~]$ vmstat 1 5 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 1 1 0 35628 14700 1239164 0 0 1740 652 117 601 11 4 66 20 0 0 1 0 34852 14896 1239788 0 0 0 23096 300 573 3 16 0 81 0 0 1 0 32780 15080 1241304 0 0 4 21000 344 526 1 13 0 86 0 0 1 0 36512 15244 1237256 0 0 0 19952 276 394 1 12 0 87 0 0 1 0 35688 15412 1237180 0 0 0 18904 285 465 1 13 0 86 0 [user@fedora9 ~]$
CPU Waiting for IO Example
In the following example, an
updatedb
process is already running. Theupdatedb
utility is part of mlocate. It examines the entire file system and accordingly creates the database for thelocate
command (by means of which file searches can be performed very quickly). Becauseupdatedb
reads all of the file names from the entire file system, the CPU must wait to get data from the IO system (the hard disk). For that reason,vmstat
running in parallel will display large values for wa (waiting for IO):[user@fedora9 ~]$ vmstat 1 5 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 2 1 403256 602848 17836 400356 5 15 50 50 207 861 13 3 83 1 0 1 0 403256 601568 18892 400496 0 0 1048 364 337 1903 5 7 0 88 0 0 1 403256 600816 19640 400568 0 0 748 0 259 1142 6 4 0 90 0 0 1 403256 600300 20116 400800 0 0 476 0 196 630 8 5 0 87 0 0 1 403256 599328 20792 400792 0 0 676 0 278 1401 7 5 0 88 0 [user@fedora9 ~]$
Additional vmstat Options
vmstat --help
[user@fedora9 ~]$ vmstat --help usage: vmstat [-V] [-n] [delay [count]] -V prints version. -n causes the headers not to be reprinted regularly. -a print inactive/active page stats. -d prints disk statistics -D prints disk table -p prints disk partition statistics -s prints vm table -m prints slabinfo -S unit size delay is the delay between updates in seconds. unit size k:1000 K:1024 m:1000000 M:1048576 (default is K) count is the number of updates. [user@fedora9 ~]$
vmstat
[user@fedora9 ~]$ vmstat procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 14960 38016 6584 1069284 0 1 506 81 727 1373 12 4 81 3 0 [user@fedora9 ~]$
vmstat -V
[user@fedora9 ~]$ vmstat -V procps version 3.2.7 [user@fedora9 ~]$
vmstat -a
[user@fedora9 ~]$ vmstat -a procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free inact active si so bi bo in cs us sy id wa st 3 0 14960 38024 988284 461704 0 1 506 81 726 1372 12 4 81 3 0 [user@fedora9 ~]$
vmstat -d
[user@fedora9 ~]$ vmstat -d disk- ------------reads------------ ------------writes----------- -----IO------ total merged sectors ms total merged sectors ms cur sec ram0 0 0 0 0 0 0 0 0 0 0 ram1 0 0 0 0 0 0 0 0 0 0 ram2 0 0 0 0 0 0 0 0 0 0 ram3 0 0 0 0 0 0 0 0 0 0 ram4 0 0 0 0 0 0 0 0 0 0 ram5 0 0 0 0 0 0 0 0 0 0 ram6 0 0 0 0 0 0 0 0 0 0 ram7 0 0 0 0 0 0 0 0 0 0 ram8 0 0 0 0 0 0 0 0 0 0 ram9 0 0 0 0 0 0 0 0 0 0 ram10 0 0 0 0 0 0 0 0 0 0 ram11 0 0 0 0 0 0 0 0 0 0 ram12 0 0 0 0 0 0 0 0 0 0 ram13 0 0 0 0 0 0 0 0 0 0 ram14 0 0 0 0 0 0 0 0 0 0 ram15 0 0 0 0 0 0 0 0 0 0 sda 136909 31536 13893867 1197609 58190 219323 2233264 7688807 0 677 sda1 35703 6048 1326394 511477 6728 16136 182984 419232 0 222 sda2 85 1489 2935 653 141 3603 29952 5254 0 1 sda3 101111 23961 12564154 685330 51321 199584 2020328 7264321 0 512 sr0 0 0 0 0 0 0 0 0 0 0 fd0 0 0 0 0 0 0 0 0 0 0 [user@fedora9 ~]
vmstat -D
[user@fedora9 ~]$ vmstat -D 22 disks 0 partitions 273820 total reads 63034 merged reads 27787446 read sectors 2395193 milli reading 116450 writes 438666 merged writes 4467248 written sectors 15377932 milli writing 0 inprogress IO 1412 milli spent IO
vmstat -p
vmstat -p
will not work under Fedora: https://bugzilla.redhat.com/show_bug.cgi?id=485246. The following report comes from an Ubuntu 9.10 system.user@ubuntu-9-10:~$ vmstat -p /dev/sda9 sda9 reads read sectors writes requested writes 23420 411365 24464 530801 user@ubuntu-9-10:~$
vmstat -s
[user@fedora9 ~]$ vmstat -s 1553972 total memory 1516180 used memory 461892 active memory 988304 inactive memory 37792 free memory 6644 buffer memory 1069388 swap cache 1052248 total swap 14960 used swap 1037288 free swap 161467 non-nice user cpu ticks 7586 nice user cpu ticks 46310 system cpu ticks 1108919 idle cpu ticks 46832 IO-wait cpu ticks 2694 IRQ cpu ticks 2452 softirq cpu ticks 0 stolen cpu ticks 6947021 pages paged in 1116896 pages paged out 183 pages swapped in 3744 pages swapped out 9985406 interrupts 18852586 CPU context switches 1239004323 boot time 15072 forks [user@fedora9 ~]$
vmstat -m
[user@fedora9 ~]$ vmstat -m Cache Num Total Size Pages fuse_request 11 11 368 11 fuse_inode 9 9 448 9 rpc_inode_cache 8 8 512 8 nf_conntrack_expect 0 0 168 24 nf_conntrack 26 80 248 16 dm_uevent 0 0 2464 3 UDPv6 22 22 704 11 TCPv6 6 6 1344 6 kmalloc_dma-512 8 8 512 8 sgpool-128 12 12 2048 4 scsi_io_context 0 0 104 39 ext3_inode_cache 6822 8360 496 8 ext3_xattr 85 85 48 85 journal_handle 170 170 24 170 journal_head 76 219 56 73 revoke_record 256 256 16 256 flow_cache 0 0 80 51 bsg_cmd 0 0 288 14 mqueue_inode_cache 7 7 576 7 isofs_inode_cache 0 0 376 10 hugetlbfs_inode_cache 11 11 344 11 dquot 0 0 128 32 shmem_inode_cache 1058 1071 448 9 xfrm_dst_cache 0 0 320 12 UDP 19 21 576 7 TCP 17 24 1216 6 blkdev_queue 21 21 1080 7 biovec-256 2 2 3072 2 biovec-128 5 5 1536 5 biovec-64 7 10 768 5 sock_inode_cache 619 650 384 10 file_lock_cache 39 39 104 39 Acpi-Operand 2935 2958 40 102 Acpi-Namespace 1700 1700 24 170 Cache Num Total Size Pages taskstats 25 26 312 13 proc_inode_cache 233 242 360 11 sigqueue 28 28 144 28 radix_tree_node 7888 8606 296 13 bdev_cache 24 24 512 8 inode_cache 370 462 344 11 dentry 6592 15390 136 30 names_cache 2 2 4096 2 avc_node 73 73 56 73 selinux_inode_security 9888 10030 48 85 idr_layer_cache 627 644 144 28 buffer_head 2308 2688 64 64 mm_struct 659 693 448 9 vm_area_struct 11110 11592 88 46 files_cache 115 130 384 10 sighand_cache 141 150 1344 6 task_struct 246 248 3696 2 anon_vma 4778 5120 16 256 kmalloc-4096 95 112 4096 8 kmalloc-2048 272 304 2048 16 kmalloc-1024 518 524 1024 4 kmalloc-512 764 888 512 8 kmalloc-256 198 208 256 16 kmalloc-128 629 832 128 32 kmalloc-64 4322 5568 64 64 kmalloc-32 1554 1664 32 128 kmalloc-16 2644 3584 16 256 kmalloc-8 3561 3584 8 512 kmalloc-192 6349 6930 192 21 kmalloc-96 885 1176 96 42 [user@fedora9 ~]$
References
- Example:
- http://lame.sourceforge.net/
- http://en.wikipedia.org/wiki//dev/random
- http://en.wikipedia.org/wiki/System_call
- http://www.softpanorama.org/Internals/unix_system_calls.shtml
http://www.ibm.com/developerworks/linux/library/l-system-calls/